|
| 1 | ABSTRACT OF COST (UPGRADATION OF DRAIN WORK) |
| 2 | Cleaning Jungles including uprooting of rank vegetation grass, bushes, wood trees and sapling of girth upto 30cm measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50 meters out side the periphery of area cleared. PWD SOR CH 4- 259 |
| 3 | Disposal of surplus earth and dismenteled brick/cc/rcc at a distance 10km from site including loading unloading in all complete. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqmonplan)includinggettingoutanddisposalof excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.All kinds of soil |
| 5 | Dismantlingbrickworkorstoneworkby manually/mechanicalmeansincementmortarand including stacking of materials as directed by Engineer-In- Charge within a distance of 50 meters |
| 6 | Cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone agregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finising and tamping complete |
| 7 | RCC work providing and laying in position specified grade of RCC, including the cost of centering, shuttering, finishing and but excluding reinforcement, all work upto plinth level. 1:1.5:3 (C:CS:SG mortar, aggregate 20mm nominal size) |
| 8 | Mild Steel or iron in plain work such as reinforced concrete or reinforced brick work (When not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (10 mm to 12mm tor (TMT Bars). |
| 9 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 10 | Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge. |
| 11 | Proving & fixing of Precast R.C.C. grating with frame500x450 mm horizontal grating |
| 12 | DETAILES OF MEASUREMENT (UPGRADATION OF PATHWAY & PAVED SHOULDER WORK) |
| 13 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.All kinds of soil |
| 14 | Construction of granuar dub base by providing close graded material, mixing in a mechanical mix plant at OMC, carrage of mixed material to work site, spreading in uniform layers with motor grades on prepared surface and compacting with vibratory power roller to achive the desired density. |
| 15 | Cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone agregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finising and tamping complete |
| 16 | Supply & fixing of pre-cast M-30 cement concrete Coloured RUBBER MOLD INTERLOCKING TILES over 40mm thick local sand bed, with 3mm thick joints filled with local sand including leveling, tempering and sweeping etc., interlocking bricks will be as description given in direction issued by the IRCSC-03-2004 and should be ISI marked all complete. 80mm thick, Strength should not less than M-30 (tiles shape decided by Engineer-in-charge with ISI Mark). Chapter-20 Road Work - New Item) |
| 17 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 18 | Finishing wall with waterproof cement paint with two coats |
| 19 | Supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 20 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m. lead complete (Cattle manure measured in stacks will reduced by 8% for Payment). |
| 21 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. (For Hazard Marker size 30 X 90cm) |
| 22 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. The retro-reflective sheeting shall be tested for 3 years out door weathering test in indian conditions as per IRC 67:2012 and proff of the same in the form of government report shall be uploded while quooating tender.90Cm equilateral trangle(For padestria crossing |
| 23 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. The retro-reflective sheeting shall be tested for 3 years out door weathering test in indian conditions as per IRC 67:2012 and proff of the same in the form of government report shall be uploded while quooating tender.(90 cm High Octangon(For stop sigen) |
| 24 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. The retro-reflective sheeting shall be tested for 3 years out door weathering test in indian conditions as per IRC 67:2012 and proff of the same in the form of government report shall be uploded while quooating tender.90Cm equilateral trangle(For T Junction) |
| 25 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade |
| 26 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. The retro-reflective sheeting shall be tested for 3 years out door weathering test in indian conditions as per IRC 67:2012 and proff of the same in the form of government report shall be uploded while quooating tender.80cmx60cm Ractangle place indication Board |
| 27 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. The retro-reflective sheeting shall be tested for 3 years out door weathering test in indian conditions as per IRC 67:2012 and proff of the same in the form of government report shall be uploded while quooating tender.90Cm equilateral trangle(ForSchool & hospital) |
| 28 | ABSTRACT (STREET LIGHTING WORK) |
| 29 | Supple & FIxing of 08 mtr Loug decorative pole having 1.5 mtr long and 2 mtr 0span double/single an(suitable for 90 mm dia LED street light pole dia 140mmX1 Smm, 00mmK40m, 90mmAmm) total height with breaker 9 mtr long pole shall be made of galvaniced mild steel tube with cast aluminium embellismonts. The Ploe are prime coated and Painted with Polyurethan Paints pole are suitable for Single/Double am breaket for street light. The Pole has a service window at the bottom comprising lour way 25 amp. Connector terminal and MCH poles can be mounted with four no anchor bolts as per Foundation dinated by E/l |
| 30 | Supply and fixing following capicity of autometic street light cubical cntrol panel with anticorrosive alkali and acid proof paint consisting of time swich TSO 100 series with contactors. HRC fuses solating switch metering instrument & instrument box with CTs etc in case of TPN. Complete in all respect (25 A TNP). |
| 31 | Supply and burying of safe earthing electrode T-19 (Hot dip galvanized) length upto 2000 mm . Outer G.I. pipe 50 mm inner pipe 25 mm terminal dia 12 mm outer G.I. pipe of 16 SWG and inner G.I. pipe 12 SWG with hot dip galvanized up to 100 micron filled with crystalling conductive mixture (CCM) having anti corrosive and conductive property with 50kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capicity along with 30 cm square C.I. frame with hinged over & masonry having from alectrode trminal to switch board cost of 25X3 G.I. strip will be extra. |
| 32 | Supply and laying of aluminium conductor PVC insulated annound served sheathe cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mun thick sand all around and protected with burnt bricks on sides and on top. On surtace the cable run shall be fixed on MS clamps etc. on suitable size are as directed by the engineer incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (U.P I\"WD Ele S. 1 No. 501) 25 sg mm X° 3-1/2 core |
| 33 | Supply and fixing of LED street light Fitting with mandatory driver set having die cast alummium body and lenses suitable for 110 Watt. To 130 Watt and Continuing to Il 66 protection having company LOGO engraved, complete in all respects. Including labour CAT-AAA with 5 years warrantee SI No.(1424) |
| 34 | S/F of of 0.5 amp to 5 amp/ SP MCB (10KA) C Curve CAT A |
| 35 | Providing, laying and fising of 50mm dia G.l. pipe (medium class) in ground/ existing trench / existing hole made by trench less cutting complete with G.I. fittings. etc. as required. ( Murket Rate) |
| 36 | Supply & FIXING OF PIN TYPE COPPER TIN PLATED CABLE socket lug to the cable leeds included with tape and ,making connection etc. 4mm |
| 37 | Supply & FIXING OF PIN TYPE COPPER TIN PLATED CABLE socket lug to the cable leeds included with tape and ,making connection etc. 4mm |
| 38 | S/B of earthin of pole by ms eartung rod of 600mmx600mm and 6 swg earthing wire etc as required complete in all respects. |
| 39 | S&F OF Copper conductar flexible cable as per latest IS 2.5mm 3 core copper wire (Approved rate NNY year 2023-24) |
| 40 | Add 2% for Consultancy fees |
| 41 | Add 18% GST |
