|
| 1 | Providing undressed wood work in roof truss,rafter, purlin, tie and the like including hoisting and fixing in position with necessaryspikes,nails including M.S straps with bolt and nuts etc. complete with kiricide oiling two coats to all timber members and two coats of anticorrosive paint to M.S straps (M.S flats, angle clesats and bolt and nuts required for flats, angle cleats wherever use shall be measured and paid separately). |
| 2 | Providing wood work in frame (chowk aths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40 mm x 3 mm x 250 mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. |
| 3 | Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands, styles & rails made from hardwood timber of width not less than 50 mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid separately.) 35mm thick. |
| 4 | Providing, fitting and fixing fully glazed window withsash bars including oxidised M.S butt hinges (75 mm x 60 mm x 3.15 mm) 2 nos on each leaf and 3 nos on single leaf (glass panes to be measured and paid separately) 35mm thick. |
| 5 | Providing, fitting and fixing 1 st class local wood (Bosum/Hollock) battened, framed and braced door and window shutters including oxidised iron butt hinges (100 mm x 58 mm x 1.90 mm) 6 nos with necessary screws. |
| 6 | Providing corrugated galvenised Iron sheet roofing ofTATA SHAKTEE/SAIL including fitting and fixing necessary galvanised Jor L hooks , bolts and nuts 8 mm dia with bitumen washer 25 mm dia x 3 mm thick and 1.6 mm thick limpet washer complete excluding coast of roof truss, purlin etc. (Roof trussedd and purlin etc. to be measured and paid separately) |
| 7 | Providing galvd iron ridging of TATA SHAKTEE/ SAIL including supplying and fixing necessary galvd screws / washers etc. complete as directed. |
| 8 | Supplying, fitting and fixing AC plain sheet for ceiling fixed with timber beading 38mm by 12mm complete as diected. |
| 9 | Providing fly proof M.S wire netting of I.S gauge designation 85 with wire of dia 0.05 mm over hollock or other wood dressed frame including 1st class timber beading of 38mm x 12 mm size chamferred includuing fitteng fitting, fixing with nessecarry wood screws etc. complete as directed (timber frame to be neasured and paid separately). |
| 10 | Distempering (one coat) with oil bound distemper of approved brand and manufacture and of requried shade on old wall surface to give an even shade, after throughly brooming the surface free from dirt, loose scales and other foreign matter and also including preparing the surface even and sand papered smooth. |
| 11 | Painting one coat (excluding priming coat) on old wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping. |
| 12 | Supplying,fitting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe,union clamps etc. complete as directed and specified.(Pipes will be measured separatly) |
| 13 | Supplying,fitting and fixing C.P. bib cock 15mm dia of approved brand as directed and specified.(G.I. & C.P. pipes will be measured separately) |
| 14 | 15mm thick Cement plaster in single coat on single or half brick wall for interior plastering upto 1st floor level including arises, internal rounded angles,not exceeding 80mm girth and finished even and smooth including curing complete as directed. (1:3) |
| 15 | Providing vitreous china wash basin with CI/MS brackets,C.P. brass chain with plug,PVC waste pipe including painting of fittings and brackets,cutting and making good the walls wherever required. |
| 16 | Providing,fitting & fixing stainless steel kitchen sink of make as specified with CI/MS brackets,C.P. brass chain with rubber plug,PVC waste pipe etc. complete including painting the fittings,cutting & making good the walls wherever required.(Sink cock.stop cocks,waste coupling are to be paid separately.) |
| 17 | Providing barge board of size 200mm x 20 mm with 1st class local Hollock/Bonsum timber including fitting and fixing with necessary wood screws etc. complete. |
| 18 | Reconstruction of brick boundary wall with RCC post, tie beam of 1.38m high above ground level and both side plastering in 1:4 mix complete as per the drawing. |
| 19 | Repairing of garage door with timber frame and CGI roofing sheet complete as directed. |
| 20 | Total impact of GST for the purpose of CTC |
