|
| 1 | Dismantling boarding, any description, fixed in any position with nails complete all as speified and directed |
| 2 | Dismantling for Battens for tiles, shingles etc, of any size including tilting fillets exc 15cm in spacing complete all as speified and directed |
| 3 | M&L for providing 6mil Polyethylene vapour barrier including removing the existing barrier & preparing & levelling the existing slab to receive the barrier complete all as speified and directed |
| 4 | S & F 1st class hw Clean sawn battens 50mm x 40mm at 30 cm centres etc treated with ATT complete all as specified. |
| 5 | M&L for providing 10 mm thick air cushioning pads stapled to the runners as specified and directed. |
| 6 | S&F 25mm thick 100mm wide seasoned Ist class hardwood Planed one side & edges tongued and grooved or rebated. Boarding in Floors and skirting (vertical surfaces) and fixed with nails supplied and fixed with screws |
| 7 | M & L for preparation new wooden surface and applying one filler coat of polyurethane lacquer of approved brand and manufacture and applying two coats of polyurethane lacquer/synthentic vamish all as specified and directed. |
| 8 | M & L for complete removal of existing treatment, preparatory to distempering & applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer on ceilings all as specified and directed. |
| 9 | M&L for two coats of oil bound distemper over a coat of primer on Old surfaces of wall including preparation of plastered surface of wall over 1.5mm thick wall care putty& complete removal of existing treatment complete all as specified and as directed. |
| 10 | S&F in repair Stainless steel fancy chromium plated 25mm dia as in curtain rods inclusive of a pair of decorative brackets per curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc. all as specified and directed. |
| 11 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as speified and directed |
| 12 | Dismantling aluminium deco grill complete all as speified and directed |
| 13 | S&F Powder coated anodised aluminium frame for door/window with or more rebates including joining cleat for fixing etc. complete all as specified. Make: JINDAL or equivalent section from HINDALCO/INDALCO/MS AJIT IND PVT LTD |
| 14 | S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type 8-21 100mm long (2 no.) suitable handle (1 no) locking arrangements complete all as specified and directed |
| 15 | S&F Aluminium powder coated two track sliding windows incl frame with two sliding shutters with glass panes including suitable beading channel gasket, rollers Maruthi lock with handles etc complete with following specification:-Frame: 61.98mmx29.70mmx1.50mmShutter stiles, top & bottom:-39mmx20mmx1.5mmPanel: 4.00mm thick tinted sheet glass of selected quality exc 0.50Sqm each pane fixed to aluminium frame with beading, rubber gasket |
| 16 | S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty/ beeding in squares exceeding 0.5 sqm each pane coated with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers and fix to wood/aluminium joinery complete all as specified and directed. Make: Hindustan Pilkinton glass Works Ltd/ Modiguard |
| 17 | S&F 18-20mm thick Granite (of any type) work (table rubbed and polished) in window-cills and like in cement mortar (1:4) over & incl 20mm thick screed in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete incl dismantling of stone slabs laid bedded & pointed in cement mortar all as specified & directed |
| 18 | S&F 18-20mm thick Granite (of any type) work (table rubbed and polished) in window-jambs/wall lining and like in cement mortar (1:4) over & incl 12mm thick CM 1:3 including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite complete all as specified & directed |
| 19 | S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
