|
| 1 | Comprehensive maintenance consisting of normal repair, greasing and preventive maintenance of electrically operated overhead travelling cranes [EOT] floor operated and Lift for the following capacities in various building and all as specified and as directed by engineer-in-charge. |
| 2 | (a) Capacity up to 5 Ton installed in TU 142 at MO Goa |
| 3 | (b) Capacity up to 5 Ton installed in P-18 at MO Goa |
| 4 | (c) Capacity up to 5 Ton installed in heavy store at MO Goa |
| 5 | (d) Capacity up to 5 Ton installed in KA - 28 at MO Goa |
| 6 | (e) Capacity up to 2 Ton installed in rotary store at MO Goa |
| 7 | (f) Capacity up to 2 Ton installed in MIG-29 Hanger at MO Goa |
| 8 | (g) Capacity up to 5 Ton installed in MIG heavy store at MO Goa |
| 9 | (h) Capacity up to 5 Ton installed in Non exprosive store NAD |
| 10 | (j) Capacity up to 2 Ton installed in AC Magazine No 2 at NAD |
| 11 | (k) Capacity up to 2 Ton installed in Mig Wksp at NAD |
| 12 | (l)Capacity up to 5 Ton installed in NTRW |
| 13 | (m)Capacity up to 5 Ton installed in Base Work Shop |
| 14 | (n) Capacity up to 2 Toninstalled in A/C Magazine No-1 at NAD |
| 15 | (o) Capacity up to 2 Toninstalled in A/C Magazine No 6 at NAD |
| 16 | Comprehensive maintenance consisting of normal repair, greasing and preventive maintenance of hand operated overhead travelling cranes [HOT] Floor operated for the following capacities in various building and all as specified and as directed by engineer-in-charge. |
| 17 | (a) Capacity up to 1 Ton HOT Crane installed in Magazine No 2 at NAD |
| 18 | (b) Capacity up to 1.5 Ton HOT Crane installed in AC Magazine No 3 at NAD |
| 19 | (c) Capacity up to 1.5 Ton HOT Crane installed in Magazine No 4 at NAD |
| 20 | (d) Capacity up to 1.5 Ton HOT Crane installed in Magazine No 5 at NAD |
| 21 | (e) Capacity up to 1 Ton HOT Crane installed in Magazine No 6 at NAD |
| 22 | (f) Capacity up to 2 Ton HOT Crane installed in Magazine No 7 at NAD |
| 23 | (g) Capacity up to 2 Ton HOT Crane installed in Magazine No 7 at NAD |
| 24 | (h)Capacity up to 2 Ton HOT Crane installed in APR-2 E Work shop at NAD |
| 25 | (j)Capacity up to 2 Ton HOT Crane installed in APR-2 E Work shop at NAD |
| 26 | (k) Capacity up to 2 Ton HOT Crane installed in APR-2 E Work shop at NAD |
| 27 | (l) Capacity up to 2 Ton HOT Crane installed in APR-2 E Work shop at NAD |
| 28 | (m) Capacity up to 2 Ton HOT Crane installed in Mig Wksp at NAD |
| 29 | (n) Capacity up to 2 Ton HOT Crane installed in Mig Wksp at NAD |
| 30 | (o) Capacity up to 1 Ton HOT Crane installed in HTL Work shop at NAD |
| 31 | (p) Capacity up to 1 Ton HOT Crane installed in Work shop at Jetty NAD |
| 32 | Supply and replacing of Spark Proof chain pulley block of capacity 1 Ton 3 Mtrs lift HOT crane. Make. Indef |
| 33 | Supply and replacing of Spark Proof chain pulley block of capacity 2 Ton 3 Mtrs lift HOT crane complete all as specified and as directed. |
| 34 | Dismantling lowering down, replacement of unserviceable cross travel trolley arrangement Spark Proof for 1 Ton HOT crane. |
| 35 | Dismantling lowering down, replacement of unserviceable cross travel trolley arrangement Spark Proof for 2 Ton HOT crane. |
| 36 | Carry out load test on (Deflection) EOT Crane under 110% of full load capacity of crane on hoisting, long & cross travel, micro checking in performance including loading, unloading, Transportation, handling and returning the test load obtained from concerned unit for EOT crane capacity up to 5Ton EOT Crane (Mobile Crane, Truck & Trailer arranged by contractor) |
| 37 | Carryout load test on (Deflection) HOT Crane under 110% of full load capacity of Crane on Hoisting, Cross Travel and long travel checking in performance including loading, unloading, Transportation, handling and returning the test load obtained from concerned unit for HOT Crane capacity up to 5Ton HOT Crane (Mobile Crane, Truck & Trailer arranged by contractor). |
| 38 | Disconnecting and taking down electromagnetic thruster/Hydraulic Brake unit from the crane, shifting to work shop, dismantling all parts, replacement of unserviceable parts like bearings, Brake coil, thruster oil, assembling, shifting to existing location and fixing in a same position, complete testing the system all as directed by Eng-in-Charge. |
| 39 | Repair rewinding of electromagnetic brake with existing gauge of copper wire of superior quality, proper insulation and testing on completion and all as specified and directed - by Engr - in charge |
| 40 | Supply only power contactor for EOT cranes of 5T capacity upto 32 AMPS With 2 No and 2 Nc complete all as specified and as directed. |
| 41 | Supply only Long liver type 2-way limit switches suitable for CT & LT operation for EOT cranes of 5T capacity complete all as specified and as directed. |
| 42 | Supply & filling of Gear Oil servo 120 Complete all as specified & directed by Eng-in-Charge |
| 43 | Supply & filling ofTransformer Oil for thruster Brake Complete all as specified & directed by Eng-in-Charge |
| 44 | Supply only steel wire rope 10 mm dia complete all as specified and as directed. |
| 45 | Supply only wheel bearing LT & CT up to 5 Ton capacity EOT and Hot cranes complete all as specified and as directed. |
| 46 | Supply and fix 15-way pendent push Button control panel (MS fabricated box with powder coated painting) fitted with 15 Nos siemens make pushbuttons & 15 Nos push button elements (contacts) suitable for EOT Cranes capacity up to 10 Ton complete all as specified and as directed. |
| 47 | Supply only push-buttons with elements (contacts) make: siemens complete suitable for 5 ton capacity EOT cranes control including dismantling the old one complete all as specified and as directed. |
| 48 | Supply only brake liners for Long /Cross Travel / Hoist motion of EOT Cranes complete all as specified and as directed. |
| 49 | Supply only in repair brake and brake pad for Long /Cross Travel / Hoist motion of EOT Cranes capacity up to 5ton complete all as specified and as directed. |
| 50 | Supply only PVC crane control cable 24 core x 0.75 sqmm complete all as specified and as directed. |
| 51 | Supply only PVC crane control cable 3 core x 4 sqmm complete all as specified and as directed. |
| 52 | Supply only PVC crane control cable 4 core x 4 sqmm complete all as specified and as directed. |
| 53 | Supply, replacing, testing and commissioning of VFD with required power and control cables, cable legs, for fixing of Drive suitable for CT & LT operation up to 4HP, 11 Amps for 1 to 5 Ton capacity EOT cranes ofMake: Yaskawa (Model V1000 or J1000) |
| 54 | Supply, replacing, testing and commissioning of VFD with required slip resistance, power and control cables, cable legs, for fixing of Drive suitable to work on Main Hoist slipring induction motors up to 7.5 HP, 22 Amps for 1 to 10 Ton capacity EOT cranes of Make: Yaskawa (Model A1000 or V1000). |
| 55 | Dismantling, lowering down of damaged long travel wheels and M & L for casting, machining of correct size Phosphorus Bronze metal collar type new wheel pressed with old surface machined M.S wheel suitable for Flame proof (Spark Proof) HOT Crane and erection, alignment, testing & commissioning of Flame proof (Spark Proof) HOT Crane capacity up to 2 ton all as specified and directed by Engineer-in-charge. |
| 56 | Supply and replacing of LT wheel Bearings as per existing size of Flame proof HOT Crane capacity up to 2ton Make: SKF / FAG all as specified and directed by Engineer-in-charge |
| 57 | M & L for dismantling, removing, taking down the gear box assembly of main hoist for cranes capacityup to 5ton and then overhauling the gear box including replacement of worn gear wheel unit complete with new one matching to the existing size, replacement of defective bearings, oil seal, gear couplings etc and then assembling , fixing back to the system alignment, testing & commissioning of EOT Crane capacity up to 5tonall as specified and directed by Engineer-in-charge |
| 58 | M & L for preparation of old painted surface and applying one coat of weather proof synthetic enamel paint over various capacity of EOT Cranes structures of approved colour (Golden Yellow) complete by removing all dirt dust grease etc all as specified and directed at various installations by Eng in charge. |
| 59 | M & L for preparation of old painted surface and applying one coat of weather proof synthetic enamel paint over various capacity of EOT Crane Gantry Girder structures at both sides of approved colour (Dark Gray) complete by removing all dirt dust grease etc all as specified and directed at various installations by Eng in charge. |
| 60 | M & L for preparation of old painted surface and applying one coat of weather proof synthetic enamel paint (make: Berger luxual quality) over various capacity of HOT Cranes structures of approved colour (Golden Yellow) complete by removing all dirt dust grease etc all as specified and directed at various installations by Eng in charge. |
| 61 | M & L for preparation of old painted surface and applying one coat of weather proof synthetic enamel paint (make: Berger luxual quality) over various capacity of HOT Crane Gantry Girder structures at both sides of approved colour (Dark Gray) complete by removing all dirt dust grease etc all as specified and directed at various installations by Eng in charge. |
| 62 | Dismantling, lowering down, repair, re-conditioning and re-fixing of long travel drive shaft with all plumber blocks & setting span, diagonals etc complete. |
| 63 | Gas cutting lowering down of old open wire DSL system and supply, fabrication/welding or new brackets for \"C\" track travelling cable DSL system MS brackets size ISA 50x50x6mm thick long 500mm with 1 Nos drilled hole for fixing of \"C\" track complete all as specified and directed by Engr-in-Charge. |
| 64 | Supply and fixing of \"C\" Track traveling cable system along with the followings :- (a) Supply & fixing of GI \"C\" Track, (b) Supply & fixing of GI \"C\" Track joints with 4 Nos 5mm locking bolts, drilling, tapping work also involved (c)Supply and fixing og GI \"C\" Track fixing clamps with GI bolts 75mm long, nuts & washers (d)Supply & fixing of fabricated GI 4 Nos bearing fixed type cable holding and moving trolleys as per required, (e)Supply & fixing of GI \"C\" Track end stoppers(f) Supply & fixing of GI Fix trolley with cable clamps,(g) Supply & fixing of PVC cable tie 250mm long as per required quantity complete set to suitable for 5 ton EOT Crane \"C\" Track trailing cable DSL system and Cross Travel Pendent push button independent moving arrangements all as specified in particular specification and as directed by Engr-in-Charge. |
| 65 | Material and labour for re-winding of electric motor of EOT crane with super enameled copper winding wire of required gauge by providing necessary insulating materials, baking, varnishhing etc complete all as manufactureing instruction and as directed by Engineer-in-Charge. Note : Rate quoted by contractor shall be included dismantling, removing, transporting, re-fixing, testing and commissioning. |
| 66 | Manning & Operation for rendering essential services of fire fighting system installation atMO Goa round the clock comprising of one No fire fighting electrically driven pump, motor and one No. jockey electrically driven pump, motor and one No. diesel generating driven pump with connected valves, etc in one person (skilled operator) each shift (three shifts from 0800 hrs to 1600 hrs, 1600 hrs to 2400 hrs and 2400 hrs to 0800 hrs) on every day including Holiday and Sunday as specified and directed by Engr-in-Charge. |
| 67 | All as per Ser No 1 but Fire Fighting installation at NAD Goa |
| 68 | Note:- (a)24 hours period will be considered as a day |
| 69 | (b)One pump shall be run at a time as required. |
| 70 | (c) Contractor has to provide 2 sets of uniform and 2 sets of safety shoes asapproved by Engr-in-Charge to electrician without any extra cost to the department. Rates quoted for respective job will be deemed to be inclusive of above aspects. In the case of absence, penalty will be charged as doubled as quoted rate for operator per shift.(d) The rate quoted shall be deemed to include for any minor repairs to pump, electric driven motor, DG set and connected valves, supply and replacement of bolts, nuts, washers, gland packing, battery maintenance etc removing and refixing of suction pipes are required for smooth running of fire fighting plant without any extra cost. |
| 71 | (e) Log sheet shall be maintained properly. |
| 72 | (f) The operator is responsible for operate the Gen set of fire fighting system installation during interruption of current and daily maintenance of DG set |
| 73 | (g) The Contractor will be responsible for safe custody of fire fighting system installation and hand over the fire fighting system installation to the department in good working condition on expiry of contract period. |
| 74 | (h) Every day trial run is to be conducted for 10 minute for serviceability of equipment/machinery including connected item. |
| 75 | NOTE : The contractor will be whole responsible if operator found absent during shift, payment will not be made/paid for the shift if the plant/Installation is running. |
| 76 | Repair overhauling of Monoblock/ centrifugal/ submersible pump set upto 75 HP by replacing worn out gland packing, gasket, bearing bushes bolts, nuts, washers etc including ,cleaning greasing tighten of bolts, nuts and testing and all as specified and directed by Engr-in-Charge |
| 77 | Supply and fix ball bearing suitable for 75HP capacity motors/pumps after removal of old unserviceable bearing and making proper alignment and testing all as specified and directed by Engr-in-Charge |
| 78 | All as per item No 40above but Pump Up to 15 HP. |
| 79 | Material and labour for re-winding of electrical motor of pump set with super enamelled copper winding wire of required gauge by providing necessary insulating material, baking, varnishing etc including painting with two coat of painting over one coat of red oxide completeUP to 75 HP all as manufacturing instruction and as directed and specified. |
| 80 | M & Lin replacement CI non return valve double flanged including bolts, nuts, washers and gasket etc ,ISI marked all as specified and directed of the following sizes:- |
| 81 | (a) 200 mm dia |
| 82 | (b) 100 mm dia |
| 83 | Supply and fix stainless steel foot valve 200mm dia bore pipe screwed of flanged type with gasket including taking down of existing valve complete all as specified and directed. |
| 84 | Supply, fixing, radiography testing three coats of painting and commissioning of hydrand valves single headed ISI marked 63 mm dia landing valves with and including CI hand wheel, CAF gasket, nuts, bolts, etc. conforming to IS : 5290-1977, type A for internal hydrants complete all as specified and directed. |
| 85 | Material and labour for heavy duty sluice valve classPN 1:6 complete with iron wheel conforming to IS 1969 double flanged and drilled endprovided with high tensile steel spindle including GI flanged Bolts/Nuts/washers gasket etc all and removal of old valve of following sizes :- |
| 86 | (a) 200 mm dia |
| 87 | (b) 100 mm dia |
| 88 | Supply, fixing and testing fire fighting delivery hose, RRL hose pipe 15m long 63mm dia ISI marked, non-percolating, flexible, 3 layered synthetic jacketed with electrometric outer covering, resistant to liquids, chemicals, acids, alkalis, solvents, abrasion & heat having 42 Kg / cm2 burst pressure, 18 Kg/cm2 working pressure, conforming to IS: 636-1988 type-B and having TAC MMD approvals in 15 mtr length wit copper wire bounded instantaneous typw 63 mm fire hose pair of male & female coupling made of aluminium alloy (anodised) in each run of hose conforming to IS : 903 all complete as specified. |
| 89 | Excavation in trenches not exceeding 1.5 m width andnot exc 1.5m in depthgetting out in hard/dense soil complete all as specified and directed. |
| 90 | Excavation in trenches not exceeding 1.5 m width andnot exc 1.5m in depthgetting out in soft disintegrated rock complete all as specified and directed. |
| 91 | M&L for Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated hard/dense soil. |
| 92 | M&L for Removal of surplus soil to a distance not exceeding 50 m and depositing where directedby Engr-in-charge. |
| 93 | M&L for Servicing of Diesel driven pump set of capacity 90 BHP and 77 KVA of make Kirloskar by the authorised Engineer of respective manufacturer on half yearly basis to make the DG Set continuous operational condition including the following checking all as specified and directed by Engr-in-Charge. |
| 94 | (i) Removing the existing engine oil, clean the oil sump and refilling with required quantity of new engine oil 20W40 & coolant to top up. |
| 95 | (ii)Checking of fan hub |
| 96 | (iii) Checking exhaust and inlet manifold belt and cap screw |
| 97 | (iv) Cleaning of radiator inside and out side thoroughly with solution (caustic soda) to the entire satisfaction of Engr-in-Charge by removing and re-fixing in original position after cleaning. |
| 98 | (v) Checking and adjusting injector and valves, tappet and replace the gasket including cost of gasket. |
| 99 | (vi) Cleaning fuel inlet connections and screw. |
| 100 | (vii) Checking of vibration damper and rectified. |
| 101 | (viii)Servicing of turbocharger by checking, leakage tightening of mounting screws & nuts and replace oil. |
| 102 | (ix) Checking water temperature safety control. |
| 103 | (x) Checking and correcting up impeller of water pump for excess play. |
| 104 | (xi) Servicing of governor and Changing of Governor Oil. |
| 105 | (xii) Checking and adjusting all fan belt. |
| 106 | (xiii) Any other check as per manufacturer\"s instructions |
| 107 | Note :- Spare parts mentioned below to be changed at the time of servicing.Coolant, Engine oil as required will be measured and paid seperately |
| 108 | (a) Fuel filter |
| 109 | (b) Lubrication oil filter |
| 110 | (c) Bypass filter |
| 111 | (d) Air Filter |
| 112 | M&L for Rewinding ofarmature of Dynamo/alternators 24 volts with `F\" class copper wire to match existing gauge including dismantling of old coil, cleaning thoroughly winding with super enamelled copper cord of existing size and gauge, varnishing, drying etc andfixed with dynamo/alternator properly testing and commissioning all as specified all and directed by Engr-in-Charge. |
| 113 | S & F repair radiator hoses of size 40mm dia or as per existing dia and 60 cm length for any capacity of Diesel Driven Engine including jubilee clip, clamp nuts etc are properly fixed and connected. |
| 114 | S & F in repair flexible pressure pipe for lubricant size of 60 cm lengthfor oil and fuel connection for complete suitable for 90BHP/77KVA Engine of complete all as specified and directed. |
| 115 | Repair/overhauling of 90BHP/77 KVA Diesel Driven Engineself starter including replacement of worn out clutch assembly, bush, spring, plunger assembly, solenoid switch, carbon brushes, brush spring etc. for the following DG Sets:- |
| 116 | Repair/overhauling of dynamo including replacement carbon, brushes holder, spring, commutator /slipring assembly bearing, regulator etc. of any make, type and capacity. |
| 117 | Supply and replace PVC insulated battery lead with 16 Sq.mm copper conductor cable of length 2 mar with copper/brass clamps and lugs for fixing on battery terminals and self starter complete as specified and as directed. |
| 118 | Supply and filling water coolant(diluted)in radiator of make valve line or equivalentincluding removal of old water/coolant, all as directed by Engineer-in-Charge. |
| 119 | S & F fan belt for90BHP/77KVA capacity of Diesel Driven Engine Set including dismantling the existing fan belt all as directed. Make Dunlop/Fenner |
| 120 | S& Fill distilled water packed in sealed gallon of 5 Ltrs with Acid |
| 121 | Supply & Fixing only sealed maintenance free Battery 12V, 200 AH complete all as specified and as directed by Engr-in-Charge. |
| 122 | Materials and labour for applying two coatsof supper enamelled paint by spray painting including preparation of diesel engine driven generating set of any capacity 380KVA/90/77BHP DG Set complete all as specified and directed. |
| 123 | M&L for aplying two coats of super enamelled paint by spray painting including preparation of motor and pump of 75 HP complete all as specified and directed. |
| 124 | M&L for aplying two coats of super enamelled paint by spray painting including preparation hydrant valve post and box with existing colour complete all as specified and directed. |
| 125 | Supplying, installing ,testing and commissioning of precharged air vessel made out of 4-5mm MS sheet (size 450 mm dia & 1500 mm height) for pressurization of hydrantsystem complete with adequate pressure gauge/ switches (as per design / requirement) with valves to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, 25 mm dia inlet with isolating valve duly painted from inside and outside complete as required, shall be installed at thepump room complete all as specified and directed. |
| 126 | Supply and fix Forged brass Air release valve (Screwed) heavy duty of size 32 mm dia bore pipe screwed including taking down of existing valve complete all as specified and directed. |
| 127 | Supply and fix pressure gauge of Range 0-14 Kg/cm2 Dial Size 100mm or 4 Inch Pressure Gauge made of MS Casing, Brass Internal and bottom connection including taking down of existing gauge complete all as specified and directed. |
| 128 | Material and labour for run lead joint including removal of old joints/joining material, excavation and earth work if any required, etc for cast iron pipe of 200mm size including taking out old run lead joint complete all as specified and directed by Engr-in-Charge. |
| 129 | Material and labour for rubber flanged joint including removal of old joints/jointing material, and replacing Nuts and bolts etc for GI/Cast iron of pipe of 200mm size complete all as specified and directed by Engr-in-Charge including taking out old joint. |
| 130 | Supply & Fixing of double door Hose Box made of MS of 16 SWG of size 750 x 650 x 250 mm to accommodate 2 hoses of 15m length and 1 branch pipe with viewing glass on the doorsand duly painted with the letters \"FIRE\" including removal of old complete all as specified and directed. |
| 131 | Supply and fix in replacement Fire alarm control panel complying with BS EN 54 2 loop panel of capacity from 99 detectors & 99 modules up to 200 detector and modules Make:- Honeywel |
| 132 | M&L for servicing of fire alarm system and panel installed at NOFRA/NAD including repair/replacement of unserviceable parts complete all as specified and directed. |
| 133 | Supply & Replacement of ELECTRONIC HOOTER dual tone duly painted in red colour paint with ABS(Non Metalic) housing complete all as specified and directed. |
| 134 | Replacement of Manual call points duly painted in red colour paint with ABS(Non Metalic) housing, The device shall have an LED which shall blink in normal state and get steady on activation to monitor the health status of the device. all as specified. |
| 135 | Supply & Fixing wiring with 2 core 2.5 sqmm armoured multi stranded FRLS unsheathedPVC copper conductor cable 1100 Volts drawn in casing capping including all accessories as required and connecting to Fire alarm panel to smoke detector, fire alarm and manual call point complete all as specified and directed. |
| 136 | Supply and fix in replacement of Battery 12 Volts 7 AH dry type complete all as specified. |
| 137 | Supply, installation, testing and commissioning of Photo electronic addressable type smoke cum heat detector conforming to IS-11360 -1985 having dual ionized chamber meant for easy detection of high carbonized fumes by means of light emitting principle complete with base, UL FM LPCB complete all as specified and directed. |
| 138 | Supply & fix in repair Response indicator as per existing model complete all as specified and directed. |
| 139 | Supply, fixing, radiography testing three coats of painting and commissioning of hydrand valves double headed ISI marked 63 mm dia landing valves with and including CI hand wheel, CAF gasket, nuts, bolts, etc. conforming to IS : 5290-1977, type A for internal hydrants complete all as specified and directed. |
