Rotary Spare, Fabrication Of Substitute Dth-16, Ir 305 Floting Sub Repair And Water Swivel Repairing - Rt-22 Spare 10 Mm X 35Mm Bolt Washer 10 Mm X 30Mm Bolt With Washer 3/8 X 1 Bolt With Washer 12Mm X 35Mm Bolt With Spring Washer 12Mm X 50Mm Stud , Jodhpur-Rajasthan

Rotary Spare, Fabrication Of Substitute Dth-16, Ir 305 Floting Sub Repair And Water Swivel Repairing - RT-22 Spare 10 mm X 35mm bolt washer 10 mm X 30mm bolt with washer 3/8 X 1 bolt with washer 12mm X 35mm bolt with spring washer 12mm X 50mm stud with nut and spring washer 1/4 X 30mm screw G.M. with nut small shifter G.M. sand drum and lifting drum ball new making catted shaft side plate new making catted shaft flange new making as per sample and size, Oil seal 60 X 85 X 10 Oil seal 787 X 631 X 75 Oil seal 612 X 762 X 75 Oil seal 100 X 140 X 13 pinion housing mounting plate new making yoke head guide bush G.M. with M.S. pipe Rivet 12mm X 65mm Fabrication of substitute DTH-16 and IR 305 Floting Sub Repair. Fabrication of 2-7/8 APIIF pin to box substitute 18 long for DTH rig which make out by EN-9 alloy steel with heat- treatment and spanner size. Floting sub old broken bolt pull out and new hole making and 3/4 UNF thread making Holding plate hole over size 3/4 X 2-1/2 HT UNF bolt with spring washer 105 X 5 O Ring Water Swivel Reparing For RT-12 Water swivel opening servicing and re-fitting after reparing Water swivel gooseneck and wash pipe opening by heated Water swivel housing loose bearing size depositing material by welding and finishing on lathe. Water swivel housing oil seal size depositing material by welding and finishing on lathe Water swivel body loose bearing size depositing material by welding and finishing on lathe Water swivel body loose oil seal size depositing material by welding and finishing on lathe. Water swivel cap loose oil seal size depositing material by welding and finishing on lathe. Water swivel gooseneck ack loose thread size depositing material by welding and finishing on lathe. Water swivel housing loose wash pipe thread size depositing material by welding and finishing on lathe. Water swivel body loose thread over size thread making Gooseneck loose thread depositing material by welding on housing and rethreading. wash pipe loose thread depositing material by welding on housing and rethreading. Water swivel body bottom thread repairing wash pipe repairing wash pipe chuck nut repairing oil seal 140-95-13 oil seal 140-90-13 Lather washer 1/2 X 2 allenkey bolt

Refer document

Refer document

INR 1.20 Lakhs /-