Construction Of Grampanchayat Office Building At Sawargaon Tal.Barshi
Tender Value
19.74 Lakhs
Estimated cost
Bid Submission
02 Jan 2025
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
savargaon → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction of Grampanchayat office Building at Sawargaon Tal.Barshi
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soil of all types, sand, graval andsoft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreding as directed, dewatering, preparing the bed for the foundation and necessary back filling, remming, watering including shoring and strutting etc. complete.( LIFT UP TO 1.5 M.) |
| 2 | Excavation for foundation in HARD MURUM including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. By Mechanical Means SSR 2020-21,P.No 148/21.06 |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 4 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C.work in foundations like raft,strip foundations,grillage and footings of R.C.C.columns and steel stanchions etc.including bailing out water,Steel centering formwork,laying/pumping cover blocks,compaction and curing roughening the surface if special finishis tobe provided (Excluding reinforcement and structural steel) etc |
| 5 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap /granite /quartzite/ gneiss metal for R.C.C. work in foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap/ granite / quartzite/ gneiss metal for R.C.C. Chajja as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap/ granite / quartzite/ gneiss metal for R.C.C. pardiof required thicknessincluding centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 10 | Providing and fixing in position TMT-FE-500bar reinforcement of various diameters for R.C.C. pils caps,footings,foundations, slabs, beams, columns, canopies, staircase, neweis, chajjas , lintels, pardis, copings, fins, arches etc. as per detailed desings, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. b) Tor Steel |
| 11 | Providing Ilnd class Burnt Brick masonary with conventional type bricks in CM 1:6 in Foundation and Plinth of inner walls inplinth , external walls in plinth , external walls including striking joints, racking out joints on expsoed faces and watering comp. |
| 12 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, racking out joints, watering and scaffolding Complete. |
| 13 | Filling in the Plinth and Floors with approved excavated materilsin 15cm to 20cm layers including watering and compaction complete. |
| 14 | Filling in the Plinth and Floors with Contractors soil sand or murum in 15cm to 20cm layers including watering and compaction complete. |
| 15 | Providing internalcement plaster 6mm thick in single coat in CM 1:4 without neeru finish,to concrete, or brick srfaces in all positions including scafolding and curing etc. complete. |
| 16 | Providing internalcement plaster 12mm thick in single coat in CM 1:4 without neeru finish,to concrete, or brick srfaces in all positions including scafolding and curing etc. complete. |
| 17 | Providing internalcement plaster 20mm thick in two coat in CM 1:4 without neeru finish,to concrete, or brick srfaces in all positions including scafolding and curing etc. complete. |
| 18 | Providing and fixing mild steel grill workfor windowsventilators etc 15 kilogram/one square metre as per drawing including fixture necessary welding and painting with one coat of anticorrosive painting |
| 19 | Providing and fixingsoild core flushdoor shutter in single leaf 32 mm thick decorative typeof exterior grade as per detailed drawing approved face veneers 3 mm thick on both face or as directedall nesessrybeads moulding and lipping wrought iron hold fasts , chromium plated fixtures and fastings with brass mortiselock chromimum platedhandles on both side and finishing with french polish etc complete. |
| 20 | Providing and fixing30mm thick both side prelaminated soild panel polyvinyl chloride door consisting of frame made out of miledsteel of 19 gauge thickness and size 19mm x19mm for styles |
| 21 | Providingand laying vitrified mirror /glossy finish decorative type of size 590mm to 605mm x590mm to 605mm of 8 to 10 mm thick and confirming IS 15622 -2006 (Group Bia ) of apprved make shade |
| 22 | Providingand laying vitrified mirror /glossy finish decorative type of size 590mm to 605mm x590mm to 605mm of 8 to 10 mm thick and confirming IS 15622 -2006 (Group Bia ) of apprved make shade |
| 23 | Providing and laying machin cut Polished Shahabad Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 24 | Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 25 | Providing and applying white-wash in two coats on old/new plastered or masonry surface and asbestos cement sheets including scaffilding and preparing the surface by burshing and brooming down complete. |
| 26 | Providing & applying two coats ofWater proof cement paintfor exterior of approved maunfacture and of approved colour to the plastered surface including scaffolding if necessary ,cleaning& preparing surface complete.Bd.0.8 Page No. 406 SSR P/I No 224/35.13 |
| 27 | Provinding & fixinghigh densitey polyethylen countainerone piece moulded water tank made out of low density polyethyler & built corrugations inclusive of delivery up to designation housing fixing of accessories such as inlet outlet,overflow inclusive of all taxes Capacity between 200 to 1000 lit. |
| 28 | Providing and fixingin position anodised(as per IS 1868/1982) Aluminium Sliding window of three track with rectangular pipe having overall dimension 95x38.10x0.90mm at weight 0.637 kg/Rmtand windos frame bottom track section92x31.75x1.30mm at weight 0.1.070 kg/rmt Top and side track section92x31.75x1.30mm at weight 0.933 kg /rmt The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417 kg/rmtinter locking section 40x18x1.25mm at weight 0.469kg/rmt an |
| 29 | Providing and fixing collapsible steelgate in two /one leaves with not rolled vertical channel of 18X9X3 mm minimum size crossing of MS flat18x5 mm Tand E runner of mimimum 40x6mm size for top runner of minimum size 6mm max spacing of vertical chanel 100mm including holds fast stopper handles locking arrangement and coat of redprimer etc. |
| 30 | Providing and fixinghalf turn 2mm dia gun metal flushing cock including all accessoris excetra complete |
| 31 | Providing & fixingg on walls/ ceiling/ floors,25mm.dia unplasticized polyvinyl chloridepipe with necessary fittings remaking good the demolished portion etc complete. Including removing existing pipe line if necessary and conveingand stacking |
| 32 | Provinding & fixing 15mm.Dia.screw down bib/stop tap of brass including necessory sockets union nuts etc. complete. |
| 33 | Providing and fixing 10cm.PVC Nahani Trap with grating etc. complete |
| 34 | Providing and fixing Orissa type white glazed earthen wear 580mm water closet pan including \"S\" trap with earthenware foot rest cast iron soil and vent pipe upto outside face of wall 1:2:4 brick bat lime bedding without flushing tank and its accessariesetc. complete. |
| 35 | Providing laying andfixingpolyvinyl chloridepipeof 110mmdia with fittings such as bendsteesreducers etc |
| 36 | Providing and fixing hume pipe septictank 900 mm dia with vent pipe andcap includingexcavation and laying |
| 37 | provding and constructing brick masonry inspection chamber 60mm x45mmx90 cm includsing 1:4:8 cement concrter foundaction 1:2:4 cement concrte channels halfround glazedstoneqware pipes brickmasonary |
| 38 | Providing soak pit of size 120cm x 120cm x120 cm including excavatingand filling with brick bats |
| 39 | Providing Letters up to 20 cm height.complet brushes coir brushers dusting cleaning including cost of paint etc complete. |
| 40 | Add For Roaylti Charges |
| 41 | Testing charges |
| 42 | AddFor GST 18 % |
AI Tender Summary
Tender Timeline
Dec 26, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 02, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 03, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender