|
| 1 | Supply, installation, testing and commissioning of Fully Automatic Oil Immersed Auto Transformer motor starter/controller panel( Pedestal type) filled with transformer oil suitable for 125 HP rating of induction motor, rated voltage 415 Volt AC in sheet steel enclosure with IP 53 protection duly painted with weather resistant enamel paint, copper wire wound oil immersed auto transformer having E class insulation, impregnated in varnish with voltage tapping of 50 %, 65 % & 80 % of rated voltage suitable for 03 Starts/Hr in duration of 15 Second each with 03 nos oil immersed contactors, thermal overload relay of range 90 to 150 Amps, coil voltage 415 Volt AC, push button for ON- OFF operation, with provision of Ammeter, Voltmeter with selector switch and ON, OFF & Trip indication LED lamps including Voltmeter, single phase preventor, HRC fuse fitted inside the panel all as conforming to IS/IEC 60947-4-7including dismantling of old worn out starter panel interval not more than 250 mm throughout complete all as specified and as directed. |
| 2 | Supply & fixing in replacement of worn outstarter with fully automatic star delta ( FASD) starter/controller suitable for 75 HP, 3 phase, 415 volt AC, AC-3 duty induction motor in sheet steel enclosure with IP 54 protection to changeover from star winding to delta winding with the help of electronc timer, having ON/OFF operation and overload protection with additional features like Auto ON (with 30 sec ON Delay), indications of supply ON/OFF and pump ON/OFF, reading of real time voltage & current of pump with unique dual analog meter, single phasing protection relay (SPPR), relay range 66 to 110 Amp, wide band coil operation from 65% to 110% of rated coil voltage - 380/415 Volt,phase-reversal protection, phase-unbalance protection, variable time-delay adjustment inside controller complete in all respect and conforming to IS/IEC 60947-4-1 standards complete all as specified and directed. |
| 3 | Supply & fixing in replacement of MCCB - 125 Amp, 415 Volt, 4 pole, 25 KA with adjustable thermal & fixed magnetic protection, Ics = 100% Icu, thermal adjustable - 0.8 to 1 In, in accordance with IS/IEC 60068-2-6 standard including making connection, testing and commissioning in DB complete all as specified and directed. |
| 4 | Supply & fixing in replacement of MCCB - 160 Amp, 415 Volt, 4 pole, 36 KA with adjustable thermal & magnetic setting/protection, Ics = 100% Icu, thermal adjustable - 0.8 to 1 In, magnetic adjustment - 5 to 10 In in accordance with IS/IEC 60068-2-6 standard including making connection, testing and commissioning in DB/LT panel complete all as specified and directed. |
| 5 | Supply & fixing in replacement of MCCB - 200 Amp, 415 Volt, 4 pole, 36 KA with adjustable thermal & magnetic setting/protection, Ics = 100% Icu, thermal adjustable - 0.8 to 1 In, magnetic adjustment - 5 to 10 In in accordance with IS/IEC 60068-2-6 standard including making connection, testing and commissioning in DB complete all as specified and directed. |
| 6 | Supply & fixing in replacement of MCCB - 250 Amp, 415 Volt, 4 pole, 36 KA with adjustable thermal & magnetic setting/protection, Ics = 100% Icu, thermal adjustable - 0.8 to 1 In, magnetic adjustment - 5 to 10 In in accordance with IS/IEC 60068-2-6 standard including making connection, testing and commissioning in LT Panel complete all as specified and directed. |
| 7 | Supply & fixing in replacement of MCCB - 315/320 Amp, 415 Volt, 4 pole, 36 KA with adjustable thermal magnetic protection, Ics = 100% Icu, thermal adjustable - 0.8 to 1 In, magnetic adjustment - 5 to 10 In in accordance with IS/IEC 60068-2-6 standard including making connection, testing and commissioning in LT panel complete all as specified and directed. |
| 8 | Supply & fixing in replacement of MCCB - 400 Amp, 415 Volt, 4 pole, 36 KA with adjustable thermal magnetic protection, Ics = 100% Icu, thermal adjustable - 0.8 to 1 In, magnetic adjustment - 5 to 10 In in accordance with IS/IEC 60068-2-6 standard including making connection, testing and commissioning in LT panel complete all as specified and directed. |
| 9 | Supply & fixing in replacement of MCCB - 630 Amp, 415 Volt, 4 pole, 50 KA with adjustable thermal magnetic protection, Ics = 75% Icu, thermal adjustable - 0.8 to 1 In, magnetic adjustment - 5 to 10 In in accordance with IS/IEC 60068-2-6 standard including making connection, testing and commissioning in LT panel complete all as specified and directed. |
| 10 | Supply & fixing in replacement of MCCB - 800 Amp, 415 Volt, 4 pole, 65 KA with adjustable thermal & fixed magnetic protection, Ics = 100% Icu, thermal adjustable - 0.8 to 1 In, in accordance with IEC 60068-2-6 standard including making connection, testing and commissioning in LT panel complete all as specified and directed |
| 11 | M&L for rewinding and refixing after rewinding the same motor of Centrifugal pump of capacity 25 HP, three phase 415 volts, 50HzAC with super enameled copper winding wire of suitbale size and gauge including insulating material, heating drying,re-assembling and testing interval not more than 250 mm throughout complete all as specified and as directed. |
| 12 | Supply & fixing in replacement of worn out change over switch with Automatic Transfer Switch from one source to other with adjustable time delay of current rating 400 Amp, 4 pole, 415 Volt AC, utilization category AC 33 A, indicating status of the source to which load is connected, with provision of LCD display, phase separator for safety from phase to phase shorting & flashover having inbuilt protection for mains/DG against under/over voltage, under/over frequency and phase failure in SS Enlosure complete as conforming to IS / IEC 60947-6-1 including connecting all cable connections, testing and commissioning by providing alluminium lugs as required size interval not more than 250 mm throughout complete all as specified and as directed. |
| 13 | Supply & fixing in replacement of worn out change over switch with Automatic Transfer Switch from one source to other with adjustable time delay of current rating 125 Amp, 4 pole, 415 Volt AC, utilization category AC 31 A, indicating status of the source to which load is connected, with provision of LCD display, phase separator for safety from phase to phase shorting & flashover having inbuilt protection for mains/DG against under/over voltage, under/over frequency and phase failure in SS Enlosure complete as conforming to IS / IEC 60947-6-1 including connecting all cable connections, testing and commissioning by providing alluminium lugs as required size interval not more than 250 mm throughout complete all as specified and as directed. |
| 14 | M&L for earthing as per IS:3043with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized strip 32 mm x 6 mm as earthing lead protected by 40 mmdia light grade GI pipe borefor protection of GI earth strip andGI pipe 20mm dia light grade for watering, supply and filling charcoal dust, common salt all around the electrode in alternate layers of 150 mm including all accessories like GI nut, bolts, reducer, nipple, wire meshed / screened funneland makingbrick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with a cast iron hinged cover resting over the cast iron frame painted with bitumastic paint which shall be embedded in the block masonryincluding excavationand earth work, refilling as shown in electrical plate No. 3 of SSR Part-I and connected to LT Panel /DG Sets etc including testing of earth resistance as required including taking out existing earth plate complete all as specified and directed. |
| 15 | Supply, installation, testing and commissioning of LT panel, indoor type, floor mountednot less than of 1500 mm x 1650 mm x 600 mmIP -54 degree of protection suitable for 3 phase, 4 Wire system , 415 Volts, 50 Hz ,CPRI approved factory made havingindependent compartment for bus bar incoming feeder and each out going feeders, dust and vermin proof, outer shell fabricated of 2 mm thick CRCA sheet & made out angle iron frame of 40 mm x 40 mm x 5 mm (for external) with seven tank treatment process for powder coating with thickness not less than 60 micron provided with suitable gasket to make it dust/vermin proof & general construction confirming to IS 8063/93, pedestal flame grouted in PCC (1:2:4) type B-1 20 mm graded stone aggregate, thimble and cable entry boxes with cable glands including disconnecting and dismantling old LT panel of any size complete in all respect and comprising of the following: -Inner Shell:- Inner shell made out of 1.6 mm thick CRCA sheet duly compartmentalised for each control gear, front lockable/openable by keys from both sides having chromium plated 19 mm dia fancy lock (02 Nos in each neutral flow of air \"U\" type completely vermin proof & to accomodate incoming/outgoing MCCBs and TPN aluminium bus bar of rating not less than 1.5 times of rated capacity of incoming MCCB. The colour coded heat shrinkable sleave for bus bar and shall be mounted on non hydroscopic, non combustible, track resistant, high strength FRP/SMC/DMC material at an interval not more than 250 mm throughout complete all as specified and as directed. |
| 16 | Incoming:-(a) MCCB - 400 Amp, 415 Volt, 4 pole, 50 KA with adjustable thermal & magnetic protection/setting, Ics = 75 % Icu, thermal adjustable - 0.8 to 1 In, magnetic adjustment - 5 to 10 In in accordance with IS/IEC 60068-2-6 standard - 01 EachOutgoing:-(a) Automatic Transfer switch from one source to other with adjustable time delay of current rating 400 Amp, 4 pole, 415 Volt AC, utilization category AC 31 A, indicating status of the source to which load is connected, with provision of LCD display, phase separator for safety from phase to phase shorting & flashover having inbuilt protection for mains/DG against under/over voltage, under/over frequency and phase failure - 01 Each(b) MCCB - 160 Amp, 415 Volt, 4 pole, 36 KA with adjustable thermal & magnetic protection/setting, Ics=100% Icu, thermal adjustable - 0.8 to 1 In, magnetic adjustment - 5 to 10 In.- 05 Each |
| 17 | (c) AC Analog Voltmeter( moving coil- rectifier type), 0 to 600 Volt, square flush size - 96mm x 96 mm, Accuracy class 1.5 including selector switch- 01 Each(d) AC Analog Ammeter CT operated( moving coil- rectifier type), square flush size - 96 mm x 96 mm, accuracy class 1.5 including selector switch- 01 Each(e) CT, resin casted of current ratio 400/5 Amp, burden -15 VA, accuracy class 1.0 - 01 Set ( 03 Nos of set)(f) LED Indicator lamp, 22.5 mm dia for RYB phase Indication -01 Set ( 03 Nos of set) |
| 18 | Supply, installation, testing and commissioning of LT panel, indoor type, floor mountednot less than of 1500 mm x 1650 mm x 450 mmIP -54 degree of protection suitable for 3 phase, 4 Wire system , 415 Volts, 50 Hz ,CPRI approved factory made havingindependent compartment for bus bar incoming feeder and each out going feeders, dust and vermin proof, outer shell fabricated of 2 mm thick CRCA sheet & made out angle iron frame of 40 mm x 40 mm x 5 mm (for external) with seven tank treatment process for powder coating with thickness not less than 60 micron provided with suitable gasket to make it dust/vermin proof & general construction confirming to IS 8063/93, pedestal flame grouted in PCC (1:2:4) type B-1 20 mm graded stone aggregate, thimble and cable entry boxes with cable glands including disconnecting and dismantling old LT panel of any size complete in all respect and comprising of the following: Inner Shell:- Inner shell made out of 1.6 mm thick CRCA sheet duly compartmentalised for each control gear, front lockable/openable by keys from both sides having chromium plated 19 mm dia fancy lock (02 Nos in each neutral flow of air \"U\" type completely vermin proof & to accomodate incoming/outgoing MCCBs and TPN aluminium bus bar of rating not less than 1.5 times of rated capacity of incoming MCCB. The colour coded heat shrinkable sleave for bus bar and shall be mounted on non hydroscopic, non combustible,track resistant, high strength FRP/SMC/DMC material at an interval not more than 250 mm throughout complete all as specified and as directed. |
| 19 | Incoming:-(a) MCCB - 200 Amp, 415 Volt, 4 pole, 36 KA with adjustable thermal & magnetic protection/setting, Ics = 100 % Icu, thermal adjustable - 0.8 to 1 In, magnetic adjustment - 5 to 10 In in accordance with IS/IEC 60068-2-6 standard. - 01 EachOutgoing:-(b) MCCB - 100 Amp, 415 Volt, 4 pole, 25 KA with adjustable thermal & fixed magnetic protection/setting, Ics = 100 % Icu, thermal adjustable - 0.8 to 1 In, in accordance with IS/IEC 60068-2-6 standard.- 02 Each(c) MCB four pole of current rating 40 Amp, C curve- 01 Each(d ) MCB FP of current rating 63 Amp, C curve - 01 Each(e) On load change over switch of current capacity 100 Amp four pole conforming to IS/IEC:60947-3- 01 Each |
| 20 | (f) AC Analog Voltmeter( moving coil- rectifier type), 0 to 600 Volt, square flush size - 96mm x 96 mm, Accuracy class 1.5 including selector switch- 01 Each(g) AC Analog Ammeter CT operated( moving coil- rectifier type), square flush size - 96 mm x 96 mm, accuracy class 1.5 including selector switch- 01 Each(h) CT, resin casted of current ratio 100/5 Amp, burden - 5 VA, accuracy class 1.0 - 01 Set ( 03 Nos of set)(j) LED Indicator lamp, 22.5 mm dia for RYB phase Indication -01 Set ( 03 Nos of set) |
| 21 | Supply & fixingstarter with fully automatic star delta ( FASD) starter/controller with in built WLC suitable for 20 HP, 3 phase, 415 volt AC, AC-3 duty Submersible motor pump in sheet steel enclosure with IP 54 protection to changeover from star winding to delta winding with the help of electronic timer, having ON/OFF operation and overload protection with additional features like Auto ON (with 30 sec ON Delay), indications of supply ON/OFF and pump ON/OFF, reading of real time voltage & current of pump with unique dual analog meter, single phasing protection relay (SPPR), relay range 28 to 42 Amp, wide band coil operation from 65% to 110% of rated coil voltage - 380/415 Volt,phase-reversal protection, phase-unbalance protection, variable time-delay adjustment inside controller complete in all respect and conforming to IS/IEC 60947-4-1 standards complete all as specified and directed |
| 22 | Supply and fix Single phase motor 2780 RPM of capacity 0.75KW/1.00HP, pressure booster pumprated discharge approx 1500 LPH at rated head 40 m suction discharge of pump 25x25 mm alongwith Pressure tank of capacity 24 litre complete all as specified and directed. |
| 23 | Supply & laying in replacement cable, 1100 volts grade heavy duty with \"\"XLPE\"\" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 120 Sqmm x 3.5 core size including fixing in Open with the help of saddles and nut bolt of suitable size complete all as specified and directed. |
| 24 | S&F in repair Contactor 95Amp 3 Pole 415 Volt complete all as specified and directed. |
| 25 | S&F in repair Contactor 70Amp 3 Pole 415 Volt complete all as specified and directed. |
| 26 | S&F in repair MNX Contactor 110Amp 3 Pole 415 Volt complete all as specified and directed. |
| 27 | M&L for in replacement of U/S starter 5HP with direct on line submersible pump starter three phase star delta fully automatic 5 HP, 3.7 KW, overload relay range 9-13 (Amp) complete all as specified and directed. |
| 28 | M&L for in replacement of U/S starter 10HP with direct on line submersible pump starter three phase star delta fully automatic 10 HP, 7.5 KW, overload relay range 17-25 (Amp) complete all as specified and directed. |
| 29 | M&L for in replacement of U/S starter 12.5HP with direct on line submersible pump starter three phase star delta fully automatic 12.5 HP, 9.3 KW,overload relay range 17-25 (Amp) complete all as specified and directed. |
| 30 | M&L for in replacement of U/S starter 15HP with direct on line submersible pump starter three phase star delta fully automatic 15 HP, 11 KW,overload relay range 23-32 (Amp) complete all as specified and directed. |
| 31 | Supply and laying in replacement PVC copper cable FRLS 10 Sqmm single corelaid in open with the help of saddles of suitable size alongwith nut bolts complete all as specified and directed. |
| 32 | M&L for in replacement submersible copper cableflat three core PVC insulated & PVC sheathed industrial cable for submersible pump motors three core nominal area of conductor size 6 Sqmm complete all as specified and directed. |
| 33 | M&L for in replacement submersible copper cableflat three core PVC insulated & PVC sheathed industrial cable for submersible pump motors three core nominal area of conductor size 10 Sqmm complete all as specified and directed. |
| 34 | Supply and laying in replacement PVC copper cable 3 core 1.5 sqmm with pvc pipe laid in bridge with the help of saddles of suitable size alongwith nut bolts complete all as specified and directed. |
| 35 | S&FMCB Triple pole & neutral, 415 Volts, 63 Amp complete all as specified and directed. |
| 36 | S&F in replacement PVC cables copper conductor insulated and unsheathed multistrandedsingle core of size 70 sqmm1100 V including copper lugs complete all as specified and directed. |
| 37 | S&F in replacement PVC cables copper conductor insulated and unsheathed multistrandedsingle core of size 50 sqmm1100 V including copper lugs complete all as specified and directed. |
| 38 | S&F framed work such as grill gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters walk ways railing frame work of ceiling etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed. |
| 39 | Supply & laying in replacement cable, 1100 volts grade heavy duty with \"\"XLPE\"\" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 95 Sqmm x 3.5 core size including fixing in Open with the help of saddles and nut bolt of suitable size complete all as specified and directed. |
| 40 | Supply & laying in replacement cable, 1100 volts grade heavy duty with \"\"XLPE\"\" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 70 Sqmm x 3.5 core size including fixing in Open with the help of saddles and nut bolt of suitable size complete all as specified and directed. |
| 41 | Supply & laying in replacement cable, 1100 volts grade heavy duty with \"\"XLPE\"\" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 50 Sqmm x 3.5 core size including fixing in Open with the help of saddles and nut bolt of suitable size complete all as specified and directed. |
| 42 | Supply only Water disinfectant Chemical having minimum 65 to 70% effective chlorine, moisture less than 10% complete all as specified and directed. |
| 43 | Supply and fix in replacement soft starter Suitable for three phase motor pump 30 HP, With overload protection, underload protection, Locked load protection, soft start, soft stop, current limit, coated PCBA, Analog output ,built in bypass for energy saving. Operating voltage 208-600 volt AC complete all as specified and directed. |
| 44 | Supply and fix in replacement soft starter Suitable for three phase motor pump 25 HP, With overload protection, underload protection, Locked load protection, soft start, soft stop, current limit, coated PCBA, Analog output ,built in bypass for energy saving. Operating voltage 208-600 volt AC complete all as specified and directed. |
| 45 | Supply and fix fully cast aluminium body finished with polyurethane paint (with prior treatment) bollard of length 736 mm & circular base diameter of 177 mm and max diameter of leg of bollard 127 mm surmounted with fully cast aluminium body finished with PU paint with acrylic window coverB22 brass holder provided with aluminium cover with 20 Watt warm white Led bulb fixed/grouted in PCC base of size 45x45x60 cm with nut and bolts alongwith complete all as specified and directed. |
| 46 | M & L for dismantling Centrifugal pump motor of size 50 HP from its position alongwith base frame,tyre coupling by disconnecting electric connections and by unscewing nut bolt and rubber sheet from suction and delivery MS Pipe of size 125 mm dia and 100 mm dia without any damage to the pipe complete all as specified and directed. Note :- (i) T&P required for dismantling will be arranged by the contractor. |
| 47 | M & L for refixing Centrifugal pump motor of size 50 HP in its original position after making good existing pcc foundation replacing damaged and rusted base frame structure and making electric connection, Tightening/replacing damaged nut bolt and damaged rubber sheet and refixing the pump motor with suction and delivery and checking for alignment after Painting the pump motor by the enamel paint of same colour as original after removal of old paint, writing the MHS number provided by the department and checking for any leakage in the pump and motor assembely complete all as specified and directed.Note :- (i) Cost of replacing Nut, bolt ,rubber sheet, painting, writing may please be included in the quoted rate no extra payment/claim will be accepted. (ii) Cost of replacing base frame foundation of same size and shape will be measured and paid under respective item of BOQ. |
| 48 | M & L for in replacement heavy duty tyre coupling (TC-15) of centrifugal pump motor of size 50 HP complete all as specified and directed. |
| 49 | M&L for dewatering of existing underground reservoirs Central pump house Sump well of any description clean inside surfaces of water under ground sump by scraping down walls & bottom surfaces of the sump with using steel wire brushes and light hammer to remove all deposition/fungus other micro organism sediment loose dis/mud sluge, vegetation other micro foreign materials etc and also removing loose/onground concrete/plaster including taking out and removing all disposal waste/spoil to a distance not exceeding 50mtr and washing the cleaned surfaces with water and washing repeatedly with rebekience solution floor/bottom of OH tanks/underground reservoirs complete all as specified and directed.Note:- Area of each sump well of 5 lakh gln capacity is 1511 Sqm. |
| 50 | M&L for dewatering of existing underground reservoirs Central pump house Sump well of any description clean inside surfaces of water under ground sump by scraping down walls & bottom surfaces of the sump with using steel wire brushes and light hammer to remove all deposition/fungus other micro organism sediment loose dis/mud sluge, vegetation other micro foreign materials etc and also removing loose/onground concrete/plaster including taking out and removing all disposal waste/spoil to a distance not exceeding 50mtr and washing the cleaned surfaces with water and washing repeatedly with rebekience solution floor/bottom of OH tanks/underground reservoirs complete all as specified and directed.Note:- Area of each sump well of 8 lakh gln capacity is 2450 Sqm. |
| 51 | M&L for dewatering of existing underground reservoirs Central pump house Sump well of any description clean inside surfaces of water under ground sump by scraping down walls & bottom surfaces of the sump with using steel wire brushes and light hammer to remove all deposition/fungus other micro organism sediment loose dis/mud sluge, vegetation other micro foreign materials etc and also removing loose/onground concrete/plaster including taking out and removing all disposal waste/spoil to a distance not exceeding 50mtr and washing the cleaned surfaces with water and washing repeatedly with rebekience solution floor/bottom of OH tanks/underground reservoirs complete all as specified and directed.Note:- Area of each sump well of 1 lakh gln capacity is 300 Sqm. |
| 52 | M&L for repairing of sluice valve with opening and taking out old unservercible defective spindle and refix the same after taking out the spindle transporting to workshop for machine work in only old gun metal/stainless steel spindle by making new threads on lathe machine with check nut, rubber gasket, gland packing, nuts & bolts all as required at site and complete all as specified and directed for the following sizes:-100mm dia bore |
| 53 | 150mm dia bore |
| 54 | 200mm dia bore |
| 55 | 250mm dia bore |
| 56 | 125mm dia bore |
| 57 | Supply, install and testing in replcement submersible pump motor copper winding 11KW/15 HP @1500 LPM at 32 mtr head crompton cat part no.J3B15/J3B15-WX or equivalent complete all as specified and directed.Note : old submersible pump will be deposited to AGE E/M Yard after removable |
| 58 | S&F in repair MNX Contactor 110Amp 3 Pole 415 Volt complete all as specified and directed. |
| 59 | M&L for dewatering of existing over head tanks of staging up to 21 meter of any descriptionof capacity 0.25 Lakh GallonsLoc PH NO 20 at OD complex, clean inside surfaces of OHT of all chambers i.e inner and outer by scraping down walls & bottom surfaceswith using steel wire brushes and light hammer to remove all deposition/fungus other organism sediment loose dis/mud sluge, vegetation other micro foreign materials etc andalso removing loose/unsound concrete/plaster including taking out and removing all disposal waste/spoil to a distance not exceeding 50 mtr and make good plastering surface wall of OHT with cement mortar (1:3) and finish surface even and smooth with using extra cement including washing the cleaned surfaces with water and washing repeatedly with rebekience solution floor/bottom of OH tanks to acheive disinfected surface inside OHT complete all as specified and directed.Note (i) Contractor will start the work after the prior permisson of department for the concern site .(ii) Contractor will do once a job in one time so that the crises of water can not be happened.(iii) Contractor will apply hislabour ,reinforcement ,T&P all material and related items near the site before starting the work. |
| 60 | (iv) Contractor will reasponsible for water supply if not finish in stipulated time he will supply to the concern area through water bouser or penality ofRs 2500/- will be charged for the compensation of no water supply. (v) OHT Cleaning done and due will be written on a block marked with outline with colour on black/blue/white back groundon the OHT at visible place in bold and clear writting with proper painting alphabtes Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high Letters etc., shall be painted with thick paint, so that they stand out boldly and solidly without showing signs of brush marks, if necessary, they shall be repainted until the desired result is obtained.(vi) Video recording of each and every OHT work before and after the work will be done by the contractor and kept in record.(vii) Cost of disinfection rebekience solution is deemed to included in the quoted rate. |
| 61 | All as per Item No 51.00 (here-in-before) but 0.5 Lakh gallonLocation - PH No. 10 (RATC) - 02 Nos , PH No. 11-02 Nos , PH No 20 (MAP & KLP)-02 Nos, PH No. 14 (NHL)-01,PH No-15 (RATC)-01,PH No-17(NHL)-01, 3 RPD-01 No ,1 CSR KLP -01 No ,LOHARA MARG -01 No,EME KLP-01, CGSR KLP-01. |
| 62 | All as per Item No 51.00 (here-in-before) but1 Lakh gallon Loc PH No 19 (RATC Line JCO Accn),PH No 12,(MES Line), PH No 09 (OHL),PH No 24 (Near Single Offr Mess)-01 No, Core HQ-01 No, PH No 20 OD-01 No. |
| 63 | All as per Item No 51.00 (here-in-before) but1.1 Lakh gallon Loc PH NO 20 at OD complex, |
| 64 | All as per Item No 51.00 (here-in-before) but1.40 Lakh gallon Loc RATC -II |
| 65 | M & L for replacement of pressure gauge of size 200 mm dial by with allfitting and testing and arresting any leakage after removing existing unserviceable pressure gauge from its original position without damaging existing structurecomplete all as specified and directed. |
| 66 | M & L for opening the door by dismantling all nut bolts and packing material without damaging any part of pressure filter of capacity Approx 35000 Gln/hour and removing complete filter media from pressure filter and stacking it in a clean and safe placecomplete all as specified and directed. |
| 67 | M & L for refilling the serviceable media in engineered manner layer wise after properly cleaning,removing unserviceable media, topping up serviceable media of same size, shape, closing of door by serviceable nut bolts and packing sheet and testing it complete all as specified and directed Note :- Media require for topping up will be measured and paid under respective item of BOQ. |
| 68 | M & L for cleaning of inner shell of pressure filter of size 27500 Gln/Hr by removing dirt,mud,rusted particles, removing any blockage in the air vents and painting the inner shell and pipes completely by one coat of primer and one coat of enamel paintcomplete all as specified and directed. |
| 69 | Supply and mixing pressure filter media (sand and gravel) of washed,best quality ,different size and shape as required suitable for swimming pool filter all as specified as per IS-8419complete all as specified and directed. |
| 70 | S&F in replacement Security Light LED 70W of new generation energy saving and environmental friendly longlife LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens empedded PC cover having TOP openining seperate driver compartment with IP-66 protection and impact resistance of IK07 with 10 KV Built surge Protection Devices and electronic driver including suitable pipe for light fiftings, bolts, brackets and necessrary paintingof connected accessories complete all as specified and as directed. |
| 71 | S&F in replacement of Post Top Lantern 35 Watts the system shall include FRP housing Hi-brightness W-LED (120-140 lumens per watt) operating voltage 11.1/12.8V, IP-65 complaint driver efficieny 85% to 90% CRI > 70 CCT 5000 to 6500 kelvin toughen glass/acrylic cover complete with GI iron pipe 65 mm dia, medium grade, 5 mtr high excluding 1 mtr planting depth with aluminium painted foundation of pole with PCC (1:3:6) using 20 mm graded stone aggregate of size 450 x 450 x 1000 mm deep including earthwork complete all as specified and directed. |
| 72 | M&L and T&P for removing of complete old paint fromPump motor 50 HP capacity and painting the same with two coat of synthetic enamelled paint over one coat of primer as existing color and writing MES Number complete all as specified and directed. |
| 73 | Supply,installation and testing in replacement MS Galvanized Pipe heavy class of size 80 mm dia with all fittings/flanged endscomplete all as specified and directed. |
| 74 | Supply,installation and testing in replacement MS Galvanized Pipe heavy class of size 100 dia mm with all fittings/flanged endscomplete all as specified and directed. |
| 75 | Supply,installation and testing in replacement MS Galvanised Pipe heavy class of size 125 dia mm with all fittings/flanged endscomplete all as specified and directed. |
| 76 | M & L for replacement of existing starters any type by dismantling three phase connections and M & L for installation, commissioning and testing fully automatic star delta starters rating 50 HP, with Ammeter, voltmeter, automatic phase sequence corrector, overload relay 37.6-60.0 range, 95 amps of E type contactor in sheet steel enclouser with IP-54 protection, including all required electrical connection and thimbles complete all as specified and directed. |
| 77 | Supply,installation and testing in replacement of Sluice valve PN 1.6 200 mm dia ISI Marked complete all as specified and directed. |
| 78 | Supply,installation and testing in replacement of Sluice valve PN 1.6 100 mm dia ISI Markedcomplete all as specified and directed. |
| 79 | Supply,installation and testing in replacement of Sluice valve PN 1.6 150 mm dia ISI Markedcomplete all as specified and directed. |
| 80 | M&L construction of old damaged brick masonry valve pit / chamber of size 1050mm x 1050mm x 1050mm (internal dimensions of chamber) using 50% new bricks built in one brick thick wall in cement mortar 1:4) includingtop of MS cover with MS sheet cover 3mm thick including frame of angle iron 40 x 40 x 6mm with locking arrangement, lifting handle and 02 Nos 100mm size MS butt hinges including painting two coats of black synthetic enamel paint over a coat of red oxide primer, 15mm thick plastering in cement mortar (1:4) (internally on all brick wall and external upto 15cm below ground level) and necessary excavation and earth work in any type of soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50 mtr, 15 cm thick PCC (1:4:8) type D-2 in foundation projected by 15cm all round from the outer face of brick wall, PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) 40mm thick in coping complete all as specified and directed. |
| 81 | M&L for cleaning the vegitation, grass, bushes etc inside and out side the installation perameterto maintain the installation premises neat and clean at various placescomplete all as specified and directed. |
| 82 | Supply, installation, clamping and testing Cast iron pipes in replcement of rusted leaking vertical rising/delivery mains of OHT of size 100 mm dia , with flanged ends and all nut bolts, centrifugally cast, class A, in any lengthcomplete all as specified and directed. |
| 83 | Supply, installation, clamping and testing Cast iron pipes in replcement of rusted leaking vertical rising/delivery mains of OHT of size 150 mm dia , with flanged ends and all nut bolts, centrifugally cast, class A, in any lengthcomplete all as specified and directed. |
| 84 | Supply, installation, clamping and testing Cast iron pipes in replcement of rusted leaking vertical rising/delivery mains of OHT of size 200 mm dia , with flanged ends and all nut bolts, centrifugally cast, class A, in any lengthcomplete all as specified and directed. |
| 85 | S&F in replacement of mechnical chlorine dosing planthigh pressure single head adjustable granular chlorine dosing system and chlorination doser pump with mixing tank for calcium hypo chloride 65 to 70% including connecting pipe complete all as specified and directed with following items :(a) Adjustable High pressure motor 5 Kg/Sqcm power input 230 V 50 Hz, 40 SPM 1/3 frictional HP, max output 10 Ltr/hr.(b) Preparation Tank of net capacity of 100 LtrsFRP.(c) 200 Ltr FRP dosing tank with gauge agitator 120 watt 900 mm SP range mounted with plastic shaft and impeller including Service tank and all assessories. |
| 86 | Taking out the existing aviation lights from its existing position and S&F new LED avaiation lights with light dependent sensor 12 wattt IP65 protection with all fitting and fixing arrangment including all electric connection wiringand control switch complete all as specified and directed. Note:- The light fitting have provision of proper grouting on PCC pedstal and grouted over the PCC platform,light fitting can sustain the wind and storm pressure and stand delibrately on 21 mtr ht position without any deflection. |
| 87 | Taking down old damaged/ Worn out / rusted sign board from installation and S&F new sign board made out of flex sheet, tin sheet box to base length and to provision of hollow square tube/ pipe, angle of size 45mm x 45mm x 5 mm thick for fixing proper arrangement of sign board as per existing, (approx length of each sign board 7.5 mtr x 0.75 mtr x 0.20 mtr) with MS clamps, bolts, nuts and washers including 04 Nos LED lights of 20 W (4 feet) in each Sign board and including all electrical connection with separateON & OFF switch box & cable of 1.5 sqmm in casing caping required at site complete all as specified and directed. |
| 88 | Supply,install, testing complete in replacement Non return sluice valve of size 100 mm dia PN 1.6 ISI markedcomplete all as specified and directed. |
| 89 | M&L for rewinding submersible motor 30 HP three Phase, 415 volts, 50 Hz A/C with insulated copper wire of existing gauge including all insulating materials, complete assembling, connecting and testing on full load complete all as specified and directed. |
| 90 | Taking down old butter fly valve and supply and fixed new CI body butter fly valve half round type ISI marked including nuts, bolts, joint, rubber insertion sheet all as specified and directed by Engineer in Charge of following sizes :- |
| 91 | 150 mm size |
| 92 | 200 mm size |
