Tender For Painting And Repair Work In The Divisional Office. - Brick Work With Non Modular Fly Ash Lime Bricks (Falg Bricks) Conforming To Is:12894, Class Designation 10 Average Compressive Strength In Foundation Cement Mortar 1:4 (1 Cement : 4 Coarse Sa, jhansi-Uttar Pradesh

Painting And Repair Work In The Divisional Office. - Brick Work with non modular fly ash lime bricks (FALG Bricks) conforming to IS:12894, class designation 10 average compressive strength in foundation Cement mortar 1:4 (1 cement : 4 coarse sand) as per sor S.I. No. DSR 6.34. 2 12 mm thick plaster on brick work minimum thickness not less than 10 mm with cement mortar in proportion of 1:6 cement and fine sand of 1.25 fineness modulus including supply of all materials, labour and tools and plants etc required for proper completion of the work. Plaster & pointing Ch.-13 17.58(III) 3 15 mm thick plaster on brick work on rough surface with cement mortar in proportion of 1:6 cement and fine sand of 1.25 fineness modulus including supply of all materials, labour and tools and plants etc required for proper completion of the work.SI. No. 17.59(iii) 4 Scraping old white or colour wash including disposal of refuse material as directed by Engineer-in-charge with a distance of 60 meter. (200 feet) as per sor si no-708 5 Providing and applying Plaster of paris putty of 2 mm Thickness over plastered surface to prepare the surface even and smooth complete.(As per sor New Item DAR 13.26) Ch-15. 6 One priming coat and Two coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of work SI.No.649+650 7 Finishing wall surface with approved make and quality birla white putty on new workincluding supply of all materials, labour T&P etc. required for proper completion of the work As per sor SI No-New item Ref DAR 13.26, Ch.-15. 8 Supply and fixing 10 liters PVC low levelflushing cisternISI marked with fittings & brackets, 40 mm dia, CP flush pipe with fittings & clamp 20 mmdia overflow pipe with specials and mosquito proof couplings of approved municipal design, 15mm dia brass stop cock (400 gms) plastic connection (1.5x1) with brass unionsincluding supply of all materials, labour, T&P etc. required for proper completion of work and painting of cistern and fittings with approved paint, cutting and making good the walls and floors where required with cement sand and grit and including water proofing materials as ordered by the Engineer-in-charge. As per SOR SI No-31(xxiii), 6 and 23.115 9 Providing and fixing 600mm x 450mm beveled edge mirror of Atul, Kiron make glass with Indian polish 6.50mm thick complete with back of 600mm x 450mm x 6mm hard board sheet fixed to wooden cleats with CP brass screws and washers including supply of all materials, labour, T&P etc. required for proper completion of work. SI No 332 10 Providing and fixing 550x400 mm wash hand basin white glazed earthen ware 1st quality ISI marked ( Hindustan, Neyeer, Ceramake ) with R.S. or C.I. brackets painted white , 15 mm diaC.P. brass pillar cock (wt. not less than 400 gms) including S/o all material labour T&P etc. fittings used should be of superior quality.(As per item no. 306) 11 Supply and installing of low density polyethylene seamless one peace moulded tank and placing the same in proper position including all taxes labour and T&P etc for proper completion of the work. Tank should be ISI marked (for 500 Liters) As per SOR SI No-New item-1, Ch-19.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	28-12-2024	1971/NIVIDA/2024-25, Date-27-12-2024	Date	03-01-2025

INR 725 /-

INR 51000.0 /-

Refer document