|
| 1 | WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long |
| 2 | 280 Kg.,9.1 Mtrs. long PCC pole |
| 3 | M S ANGLE 75X75X6 mm |
| 4 | AAACRaccoon conductor0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 5 | 11 KV AL 59 ACS Covered Conductor 78.82 sq.mm along with MVCC accessories as per EN:50397 Calculated for 1 KM Single Phase Feeder, tension/dead/anchoring clamps with piercing connector suitable for MVCC, IPC for CCto CC connection,EN-50397 -P-2 |
| 6 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 7 | 11 KV Strain hardware (T&C type) fittings |
| 8 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 9 | Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor |
| 10 | Back Clamp for 280 Kg PCC Pole of MS Flat 65x8mm.(Each weight 1.92 Kg) |
| 11 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 12 | Stay set complete without Stay wire 16 mm. (Painted) |
| 13 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 14 | Clamp65X8 MM of MS Flat for pcc Pole 280Kg. (Each weight 3.04 kg ) |
| 15 | Stay Insulators 90X65mm |
| 16 | Back filling of poles with boulders. |
| 17 | G.I. WIRES4.0 MM. (8 SWG) |
| 18 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 19 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 20 | Red oxide paint |
| 21 | Aluminium paint |
| 22 | Danger Boards Enamelled 11 KV |
| 23 | Aluminium Binding wire and tape |
| 24 | M.S.Nuts with Bolts |
| 25 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 26 | Stay set 20 mm. complete without Stay wire (Painted) |
| 27 | STAY GI WIRE 7/4.00 MM.(7/8 SWG) |
| 28 | Clamp65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 29 | Concreting of structures & foundation (1:3:6) |
| 30 | Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay |
| 31 | 11 KV Single pole cut point fitting100x50x6 mm channel |
| 32 | Erection cost |
| 33 | 18% (CGST+MPGST) on Erection cost |
