Tender For Work Of Replacing The Damaged Cable Between The Double Breakout Poles Previously Installed On The Dividers Of The Main Roads In The Textile Centre Scheme
Tender Value
17.04 Lakhs
Estimated cost
Bid Submission
03 Jan 2025
0 days left
EMD
85500
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
hapur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Work Of Replacing The Damaged Cable Between The Double Breakout Poles Previously Installed On The Dividers Of The Main Roads In The Textile Centre Scheme
BOQ
| Sl. No. | Item Description |
| 1 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SOR SI NO 501/18( make- gloster / havells / universal / polycab / grandlay)10 sq. mm 4 core |
| 2 | 16 sq. mm 4 core |
| 3 | 50 sq. mm 3.5 core |
| 4 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer- Incharge. SOR SI NO 504/18 ( make- gloster / havells / universal / polycab / grandlay)10 sq. mm |
| 5 | 16 sq. mm |
| 6 | 50 sq. mm |
| 7 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve. CAT A PWD SOR1002 /2018 ( make - L&T / siemens / havells) |
| 8 | Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and strument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal ype, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with alminimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only.SOR803 A II / 18( make - L&T / siemens / havells / schenider )incoming 315 AMP TPN. 01 no. out going 100AMP TPN. 03 no.CAT- B cubicle type |
| 9 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. DSR 14.16.2 / 14.16.3 / 22 63 mm dia (OD-63 mm & ID-51 mm nominal) (247*0.85212=210.47) |
| 10 | S/F of junction Box(sintex lockable) for street light connection complete.(Street light work at Tetile center Yojana)PSR ( bond No. 887 dt. 31-07-2020) garhmukteshwar puliya no. 01. |
| 11 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. SOR634 / 18 |
AI Tender Summary
Tender Timeline
Dec 24, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 03, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 03, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender