|
| 1 | Description of Items |
| 2 | Erection of ACSR conductor of 7/2.11 mm to 7/3.00 mm diameter including |binding etc. as required. |
| 3 | Erection of ACSR conductor of 7/3.35 7/4.00 diameter and above including binding etc. as required. |
| 4 | Supplying and erection of stay set for 11 KVover Head lines complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/l 4.00 mm dia G.. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand graded stone aggregate 40 mm nominal size foundation including excavation and refilling etc . as required. |
| 5 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre ) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc DSR 12.11 including drilling of holes for insulator pins etc (as per drawing ) and painting with primer and finished paint as required |
| 6 | Erection of angle iron/ channel iron DSR 12.12 cross arm on wood/ RCC/ PCCI steel tubular/ rail pole etc. as required. |
| 7 | Supplying and erection of a set of cross bracing FRLSame work 6 |for 11 KV over head line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron |to form a rectangle of minimum size DSR 13.8 1400 mm width X 2500 mm height, complete with 50 mm X 6mm M .S. flat iron clamps |bolts and nuts including drilling holes for insulator pins bolt and nuts etc (as per drawing ) and painting with primer and finish paint as required. |
| 8 | Suppiying and erection of 11 KV pin |insulator complete with DSR 10.1 large steel head G J. pin, nuts, washers etc. as required |
| 9 | Supplying and erection of |insulator for 1 KV over |head lines with galvanised insulator ball and socket 11 KV disc type and complete with galvanised strain clamps bolts, nuts, washers etc. as required |
| 10 | Supplying of channel iron 100 mmX 50mm X 6 mm (9.56 kg permetre) cross arm for two wire 33 KVover head line conductors.complete with 50 mm X 50 mm X 6 mmangle iron bracketwelded to the channel iron andcomplete with 50 mm X GmmM.S. flat iron clamps bolts and nuts ncluding drilling holes forwashers etc and paintinginsulator pins / fittings, bolts, nuts,|with primer and finish paint as required |
| 11 | ACSR Rabbit Conductor (50 mm2) |
| 12 | ACSR VWeasel conductor (34 sq. mm) |
| 13 | Steel Tubular Pole (SP-55 ) of 11 meter |
| 14 | Laying of one number XLPE power cable of 33 KV grade of following size DSR 8.5 direct in ground including excavation sand cushioning protective covering and refilling the trench etc as required. |
| 15 | |Above 120 sq. mm and upto 400 sq. mm |
| 16 | Supplying and making indoor cable end Each|jointing with cast resin compoundincluding lugs and other jointing materials, for folowing size of 3 core,|XLPE aluminium conductor cable of 1KV grade as required |
| 17 | Supplying and making outdoor cableend jointing with cast resin compoundincluding lugs and other jointing materials, for following size of 3 core|XLPE aluminium conductor cable of 1KV grade as required |
| 18 | Erection of metallic pole of followinglength in cement concrete1:3:6 (1 cement :3 coarse sand. 6DSR 11.4 graded stone aggregate 40mm nominal size) foundation includingexcavation and refillingetc. as required |
| 19 | Excavation of the cable trenches in hardrock not exceeding 1.5 metres in widthand lift upto 1.5 metres, includinggetting out the excavated soil anddisposal of excavated soil as directedwithin a lead of 50 metres. |
| 20 | Providing, laying and fixing following diaG.I. pipe (medium class) in groundDSR 14.13 complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required |
| 21 | 150 mm dia |
| 22 | Supply of 11 KV XLPE Cable 3 Core 240 mm2 (Armoured) |
