Name of Work: Development of 01 Nos existing open well and Providing of water supply line open well to Existing sump near ASI Mess at campus of 27th BN, ITBP Nooranand (Kerala)
Sl. No.
Item Description
1
Sub Head- Supply, Installation , testing and commissioning of Open well work.
2
Brickwork with common burnt clay FPS (non modular) bricks of class designation 7.5 in foundations and plinth in Cement mortar 1:6 for supporting the pipe. (0.6*0.6*0.6 M)
3
15mm cement plaster on the rough side or half brick wall of mix With cement mortar 1:4 (1 cement : 4 fine sand)
4
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on exiting cement paint surface.
5
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate and labour required, in water bound macadam
6
Concrete road -Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete
7
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ) , including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
8
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 of 100mm dia
9
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
