|
| 1 | SOFA SETS4/5 SEATER ( FD-281)S&F New components of 1st class Hardwood (Teak/shisham) including dismantling unservicable oneall as specified anddirected. |
| 2 | Front Legs |
| 3 | Rear legs |
| 4 | Battens |
| 5 | Back rail (3 seater) |
| 6 | Front rail (3 seater) |
| 7 | Back rail (single seater) |
| 8 | Front rail (single seater) |
| 9 | Hand rest |
| 10 | M & L for providing new cushion of 40 density cool foam of size 560 x 530x100mm thick duly upholstered with new tapestry cloth as approved (rate not less thanRs 400 /Mtr)complete all as specified anddirected. |
| 11 | M & L for providing new tapestry cloth cover for seat foam and back foam of sofa sets of approved shade & quality (as per sample kept in BSO Yard)with 04 Nos velcrow duly stitched as directedfor easy removing/closing purposes etc to cover the foam of size 560 x 530x100mm thick complete all specified anddirected.(Note:- Cost of tapestry cloth shall not be less than Rs 400 per RM.) |
| 12 | Preparation of sufaces of Sofa set 4 seaterby throughly rubbing with emery paper, applying raw/burnt seina uniformly from sofa set and polishing with french polish one or more coat to obtain a glossy finish complete all as specified anddirected. |
| 13 | All as per Item No 1.11 here in before but Sofa set 5 seater |
| 14 | Table 900 x 600 mm with/ withoutdrawer( FD- 223 & 224)S&F new components of 1stclass Hardwood (Teak/shisham) including dismantling unservicable oneall as specified and as directed. |
| 15 | Leg |
| 16 | Top rail (long/front) |
| 17 | Top rail (short/side) |
| 18 | S&Ftop 18mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak wood beading alround including dismantling unserviceable oneall as specified anddirected. |
| 19 | S&F Drawer made of 12mm thick commercial plywood and front side made of 18mm thick ply with 1mm thick laminated sheet including provision of knob completed all as specified and directed. |
| 20 | Preparation of surfaces with sand/emery paper and applying french polish with one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified anddirected. |
| 21 | Table Dressing Gents with mirror ( FD-230) |
| 22 | S&Fnew Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror complete including dismantling unserviceable oneall as specified and as direct |
| 23 | S & F new box made up of 18 mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alrounddismantling unserviceable oneall as specified in drg and as directed. |
| 24 | S&F Drawer made of 12mm thick commercial plywood and front side made of 18mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alroundand provision of knob including dismantling unserviceable oneall as specified and as directed. |
| 25 | Preparation of surfaces with sand/emery paper and applying french polish with one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and directed. |
| 26 | Table Dressing Ladies with mirror ( FD-251) |
| 27 | S&F Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror complete including dismantling unserviceable oneall as specified and as directed. |
| 28 | S &F Drawer made of 12mm thick commercial plywood and front side made of 18 mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alround and provision of knob including dismantling unserviceable oneall as specified and as directed. |
| 29 | S &Fnew complete leg base as per drg including dismantling unserviceable one all as specified and as directed |
| 30 | \S &Fnew box with twin aluminium channel fitted with glass shutter (02 nos) complete made of 18mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alround as per drg including dismantling unserviceable one all as specified and as directed |
| 31 | Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 32 | Trestle store room wooden(FD-86) |
| 33 | S & F long rail of trestle made up ofseasonedsal woodincluding dismantling unserviceable one complete all as specified, directed and shown on drawings. |
| 34 | S & F side stiffner of trestle made up ofseasonedsal woodincluding dismantling unserviceable one complete all as specified, directed and shown on drawings. |
| 35 | S & centre stiffner of trestle made up ofseasonedsal woodincluding dismantling unserviceable one complete all as specified, directed and shown on drawings. |
| 36 | S & leg of trestle made up ofseasonedsal woodincluding dismantling unserviceable one complete all as specified, directed and shown on drawings. |
| 37 | M & L for preparation of old surfaces including minor repair wherever required and painting with two coats black enammeled paintcomplete all as specified and as directed. |
| 38 | Chair dining cushioned (FD/MAP-II/04)S&F new components of 1stclass HW (teak/shisham) including dismantling unservicable oneall as specified and as directed. |
| 39 | Rear leg |
| 40 | Front leg |
| 41 | Side/back/front rails |
| 42 | stiffener |
| 43 | Providing new 75mm Cushion with new tapestry cloth fixed with 12mm ply of appropriate size of 32 density cool foam complete with dismantling old one as per sample of tapestry held with this office Make- Sleepwell/Featherfoam/Kurl-on.Cost of tapestry cloth shall not be less than Rs 400/-per meter |
| 44 | M&L for providing new tapestry cloth cover for cushion of approved shade & quality as per sample held with office to cover the foam of appropriate size and dismantling old one.Cost of tapestry cloth shall not be less than Rs 400/- per meter. |
| 45 | Tightening of all parts/joints of whole Chair dining cushioned with bamboo pins. |
| 46 | Preparation of sufaces of chair dinning cushioned by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair dinning and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed. |
| 47 | Chair visitors /Chair Writing MAP Trade Pattern (TP/FD/E6/MAP/12) |
| 48 | Chair visitors of different Make and Model (SEAT & BACK) and re-upholstering with new tapestry/ (approved quality) including dismantling of old one complete all as specified and dircted. |
| 49 | Supply and Fix New SEAT & back (Cushion,tapestry & ply)50mm thick cushion complete (approved quality) of different make and model including dismantling of old one complete all as specified and dircted. |
| 50 | Supply and fix handle of chair visitors of(soft/PV) suitable size and design as per original Pattern of different Make and Model including dismantling of old one complete all as specified and as directed. |
| 51 | M&L for painting two coats of Black paintin Iron frame of Chair Visitor of various Make & Models including welding and scraping old painted/rusted parts by emery paper all as specified and as directed. |
| 52 | Book Case(FD-45) |
| 53 | S & F new topmade out of 18mm thick commercial plywood pasted with 1mm thick laminated sheet of approved shade including 4mm thick teakwood beading including dismantling unserviceable oneall as specified and as directed.Note :- (i) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality).(ii) Hinges shall be 50 mm of approved quality. |
| 54 | S & FSide portion ofBook case made out of 18mm thick commercial plywood pasted with 1mm thick laminated sheet including 4mm thick teakwood beading including dismantling unserviceable oneall as specified and as directed. |
| 55 | S & F backmade out of6mm thick commercial ply wood including dismantling unserviceable oneall as specified and as directed. |
| 56 | S & F door shutter of book case made out of 18mm thick commercial plywood pasted with 1mm thick plastic laminated sheet of approved shade hang on 02 Nos 75mm SS hinges including fixing of 75mm CP handleincluding dismantling unserviceable oneall as specified and as directed. |
| 57 | S & F new complete legs (Four legs along with rectangular wooden frame) made out of shisham wood including dismantling unserviceable oneall as specified and as directed. |
| 58 | Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 59 | Table Dressing Ladies with Stool ( FD/MAP-II/07) |
| 60 | S & F new looking mirror with frame of 5mm thick of appropriate size with frame along with 5mm thick commercial plywood back of the mirror and minor repairs including dismantling unserviceable oneall as specified and as directed. |
| 61 | S & F new drawer ofdressing ladies (made of 18 mm thick of plywood pasted with 1mm thick laminated sheet)run on 02 Nos telescopic channelincluding 50mm SS handle including dismantling unserviceable oneall as specified and as directed. |
| 62 | S & F door shutterofdressing ladies hang on 02 Nos SS hinges including magnetic catcher and 75mm SS handle including dismantling unserviceable oneall as specified and as directed. |
| 63 | S & F new complete stool including 75mm SS handle including dismantling unserviceable oneall as specified and as directed. |
| 64 | S & F new 75mm thick 32 density cushion with approved tapestry/latherire of stool including dismantling unserviceable oneall as specified and as directed.Make : Feather foam/sleepwell/Kurl-on |
| 65 | S & F new heavy duty castor wheel as approved including dismantling unsercieale one all as specified and as directed. |
| 66 | S &Fnew basebox with drawers and doors complete made of 18mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) alongwith 4mm thick teak beading alround as per drg including dismantling unserviceable one all as specified and as directed. |
| 67 | Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 68 | Form without back (FD-77(M) & FD-1027). |
| 69 | Supply and fixing in replacement of seat plank of form without back of size 1525 x 255 x 25mm thick of 1st class hard wood teak duly wrought both side painted including nuts, bolts & rubber shoes all as specified and shown on drg and directed. |
| 70 | All as per item No.10.01 here-in-before but size 1900x 255 x 25mm. |
| 71 | All as per item No. 10.01 here-in-beforeseat plank of form with back of size 1800 x 255 x 25mm. (FD-78(M). |
| 72 | All as per item No. 10.01 here-in-before but back plank of form with back of 1800 x 150 x 19mm.(FD-78(M). |
| 73 | Supply and fixing in replacement of unserviceable portions of form with or without back with 25mm square conduit pipe of wall thickness 1.6mm duly electric welding completeall as directed (FD-77(M), FD-78(M) &FD-1027) |
| 74 | M & L for spray painting to frame of form without back except seat planks with synthetic enamel paint of OG colour all as specified and as directed. (FD-77(M) & FD-1027). |
| 75 | Rack for records6`x2`x 6` |
| 76 | S & F legof size 1800x 65x65 mm of rack made up ofseasonedteak/shisham woodincluding dismantling unserviceable one complete all as specified, directed |
| 77 | S & F Plankof rack of size 1800x150x20mm made up ofseasonedTeak/shisham woodincluding dismantling unserviceable one complete all as specified, directed |
| 78 | S & F stiffnerof rack of size 550x50x40mm made up ofseasonedTeak/shisham woodincluding dismantling unserviceable one complete all as specified, directed . |
| 79 | M & L for preparation of old surfaces including minor repair wherever required and painting withgrey/Whiteenammeled paintcomplete all as specified and as directed. |
| 80 | Chair computer/revolving ( TP/FD/E6/MAP/01) |
| 81 | Chair revolving of different Make and Model (SEAT & BACK) re-upholstering with new tapestry/ (approved quality) including dismantling of old one complete all as specified and dircted. |
| 82 | Supply and Fixing in replacement New SEAT & back (Cushion,tapestry & ply)complete (approved quality) of different make and model including dismantling of old one complete all as specified and dircted. |
| 83 | Supply and fixing in replacement of hydraulic system of chair revolving complete all as specified and directed. |
| 84 | Supply and fixing in replacementhandle(pair) of chair revolving of(soft/PV) suitable size and design as per original Pattern of different Make and Model including dismantling of old one complete all as specified and as directed. |
| 85 | Supply and fixing in replacement of complete base plate of seat of chair revolving complete all as specified and directed . |
| 86 | Supply and fixing in replacement of pedestal (bottom)consisting of five legs with twin wheel coaster of chair revolving complete all as specified and directed . |
| 87 | Two seater Desk for Junior/Senior student- |
| 88 | Supply and fixing in replacement of seat plank of two seater deskof size 915 x 310 x 19mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) with 4mm thick teak beading alround including nuts, bolts & rubber shoes all as specified anddirected. |
| 89 | Supply and fixing in replacement of back plank of two seater deskof size 915 x 150 x 19mm thick of plywood pasted with 1mm thick laminated sheet (approved shade) with 4mm thick teak beading alround including nuts, boltsall as specified and directed. |
| 90 | Supply and fixing in replacement of complete box of two seater desk for junior student ( of size as shown on drg and directed by Engr-in-charge)thick of plywood pasted with 1mm thick laminated sheet (approved shade) with 4mm thick teak beading alround including nuts, boltsall as specified anddirected. |
| 91 | Supply and fixing in replacement of unserviceable portions of two seater deskwith 25mm square conduit pipe of wall thickness 1.6mm duly electric welding completeall as specified anddirected. |
| 92 | M & L for painting to frame oftwo seater deskwith synthetic enamel paint of smoke gray/OG/black colour all as specified and directed. |
| 93 | Charpoy folding IP with Hard Top-(FD-388) |
| 94 | S&F in replacement of plywood 12mm thick BWR Gde as of size 1980 x 900mm in two parts with necessary steel screw to top of charpoy folding IP with hard top and all as shown on drg. |
| 95 | S&F in replacement of complete Head rest and foot rest made of 25mm dia GI heavy gradepipe 1.6mm thickas per shown on drg. |
| 96 | S&F in replacement of complete middle leg with gasset plate made of 25mm dia GI heavy grade pipe 1.6mm thickas per shown on drg. |
| 97 | Material and labour for painting to frame of charpoy folding IP with hard top with synthetic enamel black paint including preparation of surface with rubbing with emery paper to MS pipe . and provide 04 Nos PVC shoes to legs as specified and directed. |
| 98 | Bed hard steel |
| 99 | S&F in replacement of plywood 12mm thickBWR Gde of size 1980 x 900mm of with necessary stainless steel screw to top of Bed Hard MAP complete all as specified and directed. |
| 100 | S&F in replacement of Head board of Bed Hard MAP made of 18mm thick prelaminated MDF Board both side laminated with 4mm thick wood beading complete all as specified and directed.. |
| 101 | S&F in replacement of foot board of Bed Hard MAP made of 18mm thick prelaminated MDF Board both side laminated with 4mm thick wood beading complete all as specified and directed.. |
| 102 | Material and labour for painting to frame of Bed Hard MAP with synthetic enamel black paint including preparation of surface with rubbing with emery paper to MS pipe. and provide 04 Nos PVC shoes to legsas specified and directed. |
| 103 | Charpoy Hard top (MAP) (FD/MAP-II/01) |
| 104 | S&F in replacement of plywood 12mm thickBWR Gde of size 1980 x 900mm of with necessary steel screw to top of Charpoy I.P with Hard Top and complete all as specified and directed.. |
| 105 | M&L for painting to frame of charpoy hard top (MAP) with black synthetic enamel paint including preparationof old painted steel sufaces by scraping with emery paper, cleaning, dusting, joint welding if required and making the surfaces smooth of surface. and provide 04 Nos PVC shoes to legs complete all as specified and directed. |
| 106 | Table dining 4/6 persons (MAP) (FD/MAP-ll/03) |
| 107 | Supply and fixing in replacement of top of table dining 4 persons of size 1160x860mm made of 18/19mm thick prelaminated MDF board with appropriate wooden beading alround ot top of table dining 4 persons of size and complete all as specified and directed.. |
| 108 | Supply and fixing in replacement of top of table dining 6 persons of size 1460x860mm made of 18/19mm thick prelaminated MDF board with appropriate teak wood beading alround ot top of table dining 6 persons of size complete all as specified and directed.. |
| 109 | supply and fixing in replacement of legs of table dinning 4/6 persons with new legs of size 90x45x750mm made of 1st class hard wood teak/shisham,complete all as specified and directed.. |
| 110 | supply and fixing in replacement of long rails of size 1500x 90x45mm made of 1st class hard wood teak/shisham, for 6 persons size and shape all as shown on drg. |
| 111 | supply and fixing in replacement of long rails of size 1200x 90x45mm made of 1st class hard wood teak/shisham, for 4 persons size and shape all as shown on drg. |
| 112 | sypply and fixing in replacement of short rail of table dinning 4/6 persons with new short rails of size 90x45x900mm made of 1st class hard wood teak/shisham, size and shape complete all as specified and directed. |
| 113 | supply and fixing of wooden bracket of size 100x100x35mm made of 1st class hard wood teak/shisham, size and shape complete all as specified and directed. |
| 114 | Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed. |
| 115 | Storage Rack steel |
| 116 | supply and fixing in replacement ofverticle angle legs of storage rackof angle size 30x30x3mm and 1905mm made of mild steelsize and shape complete all as specified and directed. |
| 117 | supply and fixing in replacement of selfof storage rackofsize 910x600x0.8mm made of mild steelsize, complete all as specified and directed. |
| 118 | M&L for painting to frame of storage rack steel with olivesynthetic enamel paint including preparationof old painted steel sufaces by scraping with emery paper, cleaning, dusting, joint welding if required and making the surfaces smooth of surface. |
| 119 | Chair Verandah (MAP) (FD/E6/MAP/17) |
| 120 | S&F in replacement of unserviceable portions of frame of Chair Verandah(MAP) with 19mmconduit pipe of wall thickness 1.6mm duly electric welding complete all as specified and directed. |
| 121 | Removing old U/s PVC seat and S & F New PVC Seat of4mm thick. with weight not less than 1.85 kg and grooves 90x10mm 10 Nos Make- Supreme/Ballowal/ or eqivalant brand as approved by GE complete all as specified and directed.. |
| 122 | Removing old U/s PVC back and S & F New PVC back of4mm thick. with weight not less than 1.85 kg and grooves 90x10mm 10 Nos Make- Supreme/Ballowal/ or eqivalant brand as approved by GE complete all as specified and directed. |
| 123 | M&L painting to frame of chair verandah(MAP) with white synthetic enamel paint including preparationof old painted steel sufaces by scraping with emery paper, cleaning, dusting, joint welding if required and making the surfaces smooth of surface. and provide 04 Nos PVC shoes of white colour to legs of chair Verandah as specified and directed. |
| 124 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 |
