|
| 1 | Trimming of grass and weeds from the shoulder / berms and disposal the same to the suitable location as per technical specification Clause 1914 of MORD as per direction of the Engineer in charge |
| 2 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 ofMoRD |
| 3 | Providing, laying, spreading and compacting graded stone aggregatesto wet mixed macadam specification including Premixing the materials with water at OMC in mechanical mix plant,carriage of mixed materials by tripper to site ,laying in uniform layer with paver in sub-base/base course on well prepared surface and conpacting with vibratory roller to achieve the desire dencity as per clause of MoSRT&HSpecification for road and bridge works. |
| 4 | Providing and applying Primer Coat with bitumen emulsion SS-1 at the rate of 0.60kg/sqm on the prepared treated with primer and cleaned as per technical specification for Road and Bridge works. |
| 5 | Providing & applying Tack Coat with bitumen emulsion using emulsion pressure distributor@ 0.20Kg/ Sqm on prepared bituminous surfaceusing mechanical means as per Clause- 503 of MoSRT&H Specification for Road & Bridge works(4th Revision). |
| 6 | Providing and laying Semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled,vibratory roller and tandem rollers to achieve the desired compactionas per Clause-508 of MoSRT&H Specification for Road & Bridge works(4th Revision) |
| 7 | Painting 2 coats with any approved paint in iron works including sand papering, polishing surfaces, cost of paints, cost of all labour, T&P, etc complete in all floors as per direction of E.I.C. |
| 8 | Providing & fixing RCC ordinaryKM stone & 5th KM stone for finished item of work as perapproved drawings and technical specification and Clause 804 & 806of MORT&H Specifications for Road & Bridge works(4th Revision)(A) Ordinary Kilometre Stone |
| 9 | Providing & fixing RCC ordinaryKM stone & 5th KM stone for finished item of work as perapproved drawings and technical specification and Clause 804 & 806of MORT&H Specifications for Road & Bridge works(4th Revision)(B) 200m road Stone |
| 10 | Supplying & fixing 15cm dia and 1m long RCCguard post in cement concrete (1:2:4) including cost, conveyance, taxes, royality of all materials including centering and shuttering finished the exposed surface smooth,watering cost and labour for reinforcement. Guard post |
| 11 | Supplying, fitting, fixing of road signboard made out of 3mm thick Aluminium Composite Material (ACM) sheet duly coated one side loaded with pressure sensitive encapsulated lens type high intensive grade retro-reflective sheeting complete as per MoRTH technical specification clause 801.3 and IRC -67/2001 with angle iron frame 65mm x 65mm x 6mm fixed with singleangle iron post as per specification including application of two coats of enamel paint of approved quality in tr form of checks white and black over the posts, fixed with M-15 grade cement concrete bace of 300mm Dia 600mm depth size of each post post as per approved drawing including cost, conveyance, royality & taxes of all materials, labour, T&P etc, complete as per direction of the E.I.C1200 x 900mm Informatory sign board |
| 12 | Supplying, fitting, fixing of road signboard made out of 3mm thick Aluminium Composite Material (ACM) sheet duly coated one side loaded with pressure sensitive encapsulated lens type high intensive grade retro-reflective sheeting complete as per MoRTH technical specification clause 801.3 and IRC -67/2001 with angle iron frame 65mm x 65mm x 6mm fixed with singleangle iron post as per specification including application of two coats of enamel paint of approved quality in tr form of checks white and black over the posts, fixed with M-15 grade cement concrete bace of 300mm Dia 600mm depth size of each post post as per approved drawing including cost, conveyance, royality & taxes of all materials, labour, T&P etc, complete as per direction of the E.I.CVillage identification board(600X450) mm |
| 13 | Supplying, fitting, fixing of road signboard made out of 3mm thick Aluminium Composite Material (ACM) sheet duly coated one side loaded with pressure sensitive encapsulated lens type high intensive grade retro-reflective sheeting complete as per MoRTH technical specification clause 801.3 and IRC -67/2001 with angle iron frame 65mm x 65mm x 6mm fixed with singleangle iron post as per specification including application of two coats of enamel paint of approved quality in tr form of checks white and black over the posts, fixed with M-15 grade cement concrete bace of 300mm Dia 600mm depth size of each post post as per approved drawing including cost, conveyance, royality & taxes of all materials, labour, T&P etc, complete as per direction of the E.I.C 900 mm Equilateral Triangle |
