|
| 1 | GST % for the tender Please select the rate of GST in cell AY13. Rate selected shall be applicable for the entire BoQ. |
| 2 | WRPL CGD Morena GA |
| 3 | Supply of Gas Genset 25 KVA or HigherSilent Natural Gas Generating Set 25 KVA or higher- Supply & Assembly of Silent Type Natural Gas Genset with processor based AMF System including assembly of all loose accessories supplied with Gas engine generator set at site at the time of pre-commissioning \"25 KVA/20KW 3 phase Natural Gas Genset, Prime Rated, radiator cooled, powered 25 KVA or higher 3 phase Leroy-Somer / CGL Equivalentelectric alternator, microprocessor based Controller,Silencer,Anti-Vibration mountings, exhaust flexible connector,Batteries with cables, Acoustic Enclosure and AMF (Auto Mains Faliure Panel) operating Inlet gas pressure can be any of thea)4 bar with suitable metering arrangementb)300 mbarc)any other pressure below 4 bar will also be acceptable with suitable metering & operating arrangement by bidder to offered pressure |
| 4 | Supply of PRV 1\" 300# FE/BWSupply of Pressure Regulator valve 1\"x300 FE/BW, Inlet-15 to 48 bar and Outlet- 3-4 Bar Gas Pressure, Max flow: - 50 SCMH, Nirmal Make D-81 Type or Equivalent make |
| 5 | Supply of NRV 1\" 300# |
| 6 | Supply of Ball Valve 1\" 300# FE/BW |
| 7 | Supply of Concentric Reducer 1\"X3/4\" 300# |
| 8 | Supply of CS Pipe 3/4\" 300# |
| 9 | Supply of CS Pipe 1\" 300# |
| 10 | Supply of WNRF3/4\" 300# |
| 11 | Supply of WNRF1\"300# |
| 12 | Supply of SWM Gaskets 3/4\" 300# |
| 13 | Supply of SWM Gaskets 1\"300# |
| 14 | Supply of Bend 1\" 300# 90 deg LR Bend |
| 15 | 32 mm MDPELaying by Method Moling |
| 16 | Supply of 32 mm Coupler |
| 17 | Supply of 32 mm Elbow 90 Deg. |
| 18 | Supply of TF 32mm X 1\" inch |
| 19 | Concrete Pit Restroration (PCC) |
| 20 | ITC of Metering Unit (Meter+Regulator)Installtion, testing ,commissioning of Commercial Diaphagram meter and Pressure regulator with all other required accessories not part of separate supply item |
| 21 | ITC of PRV and support structureInstalltion, testing ,commissioning of Pressure regulator valve with designated point in A/G pipeline with support structure including all other required accessories not part of separate supply item |
| 22 | Removal of existing DG and ITC of GEGSETRemoval of Existing DG, AMF Panel & Fuel Tank,dismanteling of Shed & placing the DG,AMF Panel & Fuel Tank at same Location(CGS) or Owner desginated Location(outside CGS) by transport arranged by owner and erection,installtion,electrical interconnection,testing and commissioning of Gas GensetSpecification of existing/old DG:DG set Model KG1-30WS or as per manufacturer\"s standard for same rating Overall dimensions of DG set2500x950x1294 mm approx with +/-50 mmWeight of DG set in Kg (dry) 1040 Kg approxWeight of DG set in Kg (wet) 1090 Kg approx |
