Tender For Annual Repairs And Maintenance Works At Bsc, Samalkot For The Year 2024 25
Tender Value
13.97 Lakhs
Estimated cost
Bid Submission
02 Jan 2025
0 days left
EMD
27950
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
samalkot → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Repairs And Maintenance Works At Bsc, Samalkot For The Year 2024 25 Restoration Of Three Phase Power Supply To Feeder Pillar Near Gd 8 By Laying Of Ug Cable From Mv Room And General Maintenance Works To The Godowns And Ancillary Buildings
BOQ
| Sl. No. | Item Description |
| 1 | Supplying of PVC/XLPE armoured cable with aluminium conductor 1.1 KV Gradeconfirming to IS 7098 (part I)1988 with upto date amendments of the following size at the site of work. |
| 2 | 3 1/2 X 70 Sqmm |
| 3 | 3 1/2 X 50 Sqmm |
| 4 | 4 X 16 Sqmm |
| 5 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. |
| 6 | above 35Sqmm upto 95Sqmm |
| 7 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 8 | above 35sqmm and upto 95Sqmm |
| 9 | upto 35sqmm |
| 10 | Supplying and fixing of light class G.l. pipe of 50 mm dia. (nominal) 3 metres length along the pole/wall for protection of under ground cable as required. |
| 11 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required |
| 12 | 100mm Dia |
| 13 | Providing, laying and fixing 100mm dia UPVC pipe (Schd 80) in ground complete with UPVC fittings including trenching (75 cm deep) and re-filling etc as required. |
| 14 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 15 | above 35sqmm and upto 95Sqmm |
| 16 | upto 35sqmm |
| 17 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 18 | 8 way, Double door |
| 19 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 20 | Single pole |
| 21 | Single pole and neutral |
| 22 | Triple pole and neutral |
| 23 | Supplying and fixing of following way three pole and neutral sheet steel, MCB distribution board, 415V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc as required. (But without MCB/RCCB/Isolator) |
| 24 | 4 way(4+12), Double door |
| 25 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 26 | Group C |
| 27 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required |
| 28 | 3 X 2.5 Sqmm |
| 29 | 3 X 1.5 Sqmm |
| 30 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 31 | 12 Module (200mmX150mm) |
| 32 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 33 | 5/6 A switch |
| 34 | 3 pin 5/6A socket outlet |
| 35 | Supplying, installation, testing and commissioning of 1200 mm 20W LED Aluminium LTT8-20 tube with extruded Al body, PC diffuser (single side connection) and inbuilt driver with efficacy min of 100 lumens/W along with Highly robust Industrial Box type(not compact type) luminaire suitable for single T8 LED Tube and also dismantling the existing tube including giving connections etc., at the site of work.(NABL certified as per ISO/IEC specification) |
| 36 | Supply, installation, testing and commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan with Brushless Direct Current(BLDC)Motor, class of insulation:B, 3 nos blades, 30 cm long down rod, 2 nos canopies, shackle kit, safety rope, copper winding, Power factor not less than 0.9, service value(CMM/W) minimum 6.85, Air delivery minimum 215CMM ,350RPM (tolerance as per IS:374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut, bolts,washers, temperature rise =75 degree C(max) , insulation resistance more than 2 mega ohm , suitable for 230V, 50 Hz single phase AC supply, earthing etc complete as required. |
| 37 | Shifting of the existing feeder pillar by making good all the necessary connections required at the site of work etc.,as required. |
| 38 | Supplying and making straight through joint with cast resincompound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required |
| 39 | 4 X 16Sqmm |
| 40 | Supplying and fixing 30A ,415V, TPN industrial type socket outlet with 4 pole and earth, metal enclosed plugtop along with 30A\"C\" curve,TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc as required |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 42 | One or more coats on old work |
| 43 | Supplying, installation, Testing and Commissioning of 45W LED Street light fitting (including Inbuilt electronic LED driver with lower THD, Output Open / Short Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection & other safety test as per latest ISO/IEC Specification and BIS comply, including 10kV surge protection device) made up of pressure die cast alluminium housing with toughened glass including fixing on wall/truss/pole with suitable clamps and nut bolts and other accessories, dismantling existing fitting and giving connection at site of work etc., as required (ISI certified) (IP66 protection, Efficacy ≥110/120 LPW) |
| 44 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) |
| 45 | Supplying of 300 mm sweep, min. of 1350 RPM speed, min. of 1160 CMM air delivery Heavy Duty exhaust fan with Sturdy metal body with metal blades & Metal louvers for protection from birds and foreign matter etc., as required at the site of work. |
| 46 | Installing of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning,etc as required. (Upto 450mm sweep) |
| 47 | Supplying and fixing of 300 mm x 300 mm size metalic frame cover fabricated with 25 mm x 25 mm x 3 mm thick angle iron welded construction frame structured and 1.6 mm thick M. S. sheet cover plate panel with double hinges and knobe type locking arrangement including painting, making recess in wall of 300 mm Width x 300 mm Height x 150 mm Depth, masonary, plastering & finishing the good (As per drawing) |
| 48 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required |
| 49 | 5/6A Switch |
| 50 | Replacement of 36W/40W LED Well glass Xitanium Driver in the existing Phillips/Crompton/Havells etc., make 40 W LED Well glass fitting including dismantling the existing fitting, checking, refixing, giving connections etc. at site of work as required. |
| 51 | Supplying, installation, testing and commissioning of 1200 mm 20W LED Aluminium LTT8-20 tubelight with extruded Al body (single side connection) with in-built driver and efficacy of 100 lumens/W by fixing in the existing T8 LED box type luminaire with G13 lamp holders using necessary clamps and also dismantling the existing tube including giving connections etc. at site of work as required.(NABL certified as per ISO/IEC specification) |
| 52 | Dismantling of the unwanted MS conduit pipesalong with aluminim wire, old light fittings etc as required at the site of work |
| 53 | Fixing of the sheet for switch boards, junction boxes with necessary nuts and bolts and making good the connections at the site of work as required |
| 54 | Providing and fixing extra conduit down rod of 20mm dia, 2X 10 cm length, wiring with 2x1.5sqmm FRLS PVC insulated, copper conductor, single core cable including painting etc as required |
| 55 | Supplying, installation, testing and commissioning of 40W LED well glass(clear type) made of high pressure die cast aluminium housing and fixing on truss/wall/pole with suitable clamps and nuts& bolts including connection etc as required( as per latest ISO/IEC specification)(IP66 protection luminar efficiency >105m/W, CRI>75) |
| 56 | Dismantling of pole/ street light standard/strut embedded in brick ballast foundation etc as required |
| 57 | Painting the RCC/PSC pole and all accessories and providing Zebra lining (Y/B) to the pedastal/ pole up to 1.5 mtr and numbering the pole etc as required at the site of work. |
| 58 | Providing and Making steel pole colar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required.(volume of pole/pipe not to be deducted) |
| 59 | Shifting of the twin tube fittings to the corner of the gable wall& to the centre by making good the necessary connections at the site as required. |
| 60 | Supplying and fixing of following sizes steel conduitalong with accessories in surface/recess including painting in case of surface conduit or cutting the wall and making good the same in case of recessed conduit as required. |
| 61 | 20mm |
| 62 | Earthing with 60mm outer dia ,2 mtr length GI earthing electrode, completely filled with conductive crystalline compound ,fitted with minimum of 40x6x2000mm GI strip including 50 kgs of eco friendly maintenance free earthing compound to enhance soil conductivity and providing masonry enclosure with cover plate having locking arrangement etc at the site of work as required. |
| 63 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 64 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 65 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 66 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 67 | 3 1/2 X 70 Sqmm(38mm) |
| 68 | Dismantling of the old existing DBs, Switchgears, Switch boards etc., as required at the site of work |
| 69 | CREDIT ITEMS |
| 70 | Dismantled iron electric poles |
| 71 | Dismantled aluminium insulated wire |
| 72 | Dismantled DBs, switchgears, switchboards |
AI Tender Summary
Tender Timeline
Dec 23, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 02, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 03, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender