Emergent Repair And Restoration Of Commercial Building Junior Dormitory Of Victoria Boys School Under Pwd Kurseong Sub Division During The Year 2024 2025
Tender Value
9.37 Lakhs
Estimated cost
Bid Submission
02 Jan 2025
0 days left
EMD
18746
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kurseong → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Emergent Repair And Restoration Of Commercial Building Junior Dormitory Of Victoria Boys School Under Pwd Kurseong Sub Division During The Year 2024 2025
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling carefully wooden walling, flooringof ceiling and stacking dismantled materials asdirected. |
| 2 | Dismantling carefully wood work in posts, postplates, rafters, partition etc., sorting and stackingserviciablematerialsatsiteandremoving rubbish as directed. |
| 3 | Wood wrk in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost f nails, screws etc.) (the quantum should be corrected upto three decimmals) i) Sal Siliguri. |
| 4 | Rough dressed timber planks fitted and fixed with nut bolts excluding framework complete :In ground floor. i) 35mm thick planks a) Sal local. |
| 5 | Ceiling with 12m thick wooden planks fitted and fixed complete (excluding the supporting framewrk) as per direction of the Engineer-in-charge. In Ground flor a) Sishu/Chmap / BadamGamar Bhla MgeraHallak. |
| 6 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwichcore, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria.. i) 66mmx90mm |
| 7 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwichcore, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria.. i) 32m thick. |
| 8 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) a) 40x6mm, 250 mm length. |
| 9 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark i) 75mmx40mmx1.12mm. |
| 10 | Anodised aluminium barreltowersocket bolt (full covered) of approved manufactured from extruded section conforming to I.S 20474 fitted and fixed with cadmium plated screws : i) 75mm long x10mm dia. Bolt. |
| 11 | Andised aliminium D-type handle of approved quality manufctured from extruded section conforming to I.S specification (I.S 23072) fitted and fixed complete : a) with continuous plate base (HexagonalRound rod) i) 75mm grip x 10mm dia rod. |
| 12 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mendingdamage will be paid separately) a) Upto area 2.5 sq.m |
| 13 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusionsconforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868- 1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) allcomplete as per architectural drawings and direction of Engineer-in-charge.10-12 Micron thickness Annodizing filmNatural white For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 kg per Mtr. and for shutter Btotom and Top member @ 0.472 kg per mtr, style side member @ 0.493 kg per Mtr. and Interlock member @ 0.612 kg per Mtr. (Note : for estimate purpose construction wing may consider weight of 2-track Aluminium window @ 5.5 kg per Sq.M and 3-track Aluminium window @ 6.5 kg per sq.m) |
| 14 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987 i) 5mm thick clear glass. |
| 15 | M.S or W.I ornamental grill of approved design joints continuously welded with M.S, W.I Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor i) Grill weighing above 10 kgsq.mtr and up to 16 kgsq.mtr. |
| 16 | Supplying best Indian sheet glas panes set in putty (as per I.S specifiction) and fitted and fixed with teak wood beads and nails complete (In all floors for internal wall & upto 6m height fr external wall i) 4mm thick. |
| 17 | Stripping off worn out plaster and raking outjoints of walls, celings etc. upto any height and in any floor including removing rubbish within alead of 75m as directed. |
| 18 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excludingcost of chipping over concrete surface] i) with 1:4 cement mortar 20mm thick plaster. |
| 19 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 20 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surfaces by sand papering etc. including using of approved putty etc. on the surfaces, if necessary a) On steel or other metal surface : With super gloss (Hi-gloss) i) Two coats (with any shade except white) |
| 21 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 22 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surfaces by sand papering etc. including using of approved putty etc. on the surfaces, if necessary a) On steel or other metal surface : With super gloss (Hi-gloss) i) Two coats (white in shade) |
| 23 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-charge. (excluding the cost of supporting frame work and teak wood battenLipping) In ground floor i) 19mm |
| 24 | Acrylic distemper to interior wall, ceiling with a coat of solvent basedinterior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface. A) Two coats. |
| 25 | Stopping roof leakages in C.I or G.C.I or asbestos roofing i) with limpet and bitumen wasehr and putty. |
| 26 | Taking out carefully G.C.I or C.I or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc. and stacking the material at site as directed. |
| 27 | Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) a) with 0.63mm thick sheet. |
| 28 | Supply, fitting and fixing E.W.C in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. a) With \"S\" Trap. |
| 29 | Supplying fitting and fixing Closet seat of approved make with lid and C.P hinges, rubber buffer and brass screws complete a) E.W.C i) Plastic (hallow type) white. |
| 30 | Supplying fitting and fixing 10 litre PVC low -down cistern conforming to I.S specification with PVC fittings complete, C.I brackets including two coats of painting to bracket etc. |
| 31 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducingsocket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements oftotal pipe line including all specials. No separate payment will be made for accesories, specials. a) For exposed work i) CPVC Pipes Class-1, SDR-1115 mm |
| 32 | Supplying fitting and fixing bib cock or stop cock i) Chromium plated Bib Cock with wall flange (Equivalent to Code No. 5047 & Model- Florentine of Jaquar or similar brand. |
| 33 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75mmx75mmx75mm wooden blocks. Complete i) 470mmx280mmx340mm. |
| 34 | Supplying, fitting and fixing approved brand 32mm dia PVC waste pipe, with PVC coupling at one end fitted with necessary clamps i) 1050mm long. |
| 35 | Add 18% GST |
| 36 | Add 1% Cess |
AI Tender Summary
Tender Timeline
Dec 23, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 02, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 06, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender