Tender For Bituminous Road Work From The House Of Ram Raksha Pathak To The House Of Shri Ram Pathak In Nagar Panchayat Lambhua Tulsi Nagar, Lambhua-Uttar Pradesh
TDR : 46856722
Tender Notice
BOQ
Expired
Lambhua
Uttar Pradesh
Tender For Bituminous Road Work From The House Of Ram Raksha Pathak To The House Of Shri Ram Pathak In Nagar Panchayat Lambhua Tulsi Nagar
Providing laying, spreading and compacting stone aggregates of 63-45mm sizes to water bound macadam G-2 Specification including spreading in jniform thickness, hand paching rolling with 3 wheeled steel/Vibratory roller 80-100KN in stage to proper grade and camber, applying and brooming requisite type of screening / binding matericals to fill up the interstices of coarse aggregate, watering and compacting to the required density for grading 2 as per MORD specification No. 405
3
Providing laying, spreading and compacting stone aggregates of 53-22.4mm sizes to water bound macadam G-3 Specification including spreading in jniform thickness, hand paching rolling with 3 wheeled steel/Vibratory roller 80-100KN in stage to proper grade and camber, applying and brooming requisite type of screening / binding matericals to fill up the interstices of coarse aggregate, watering and compacting to the required density for grading 3 as per Technical specification clause No. 405.30
4
Brick edging on both sides of the road of brick class-150, 8cm wide and 12cm deep laid with mud mortar including labour & supply of bricks finished to required template in proper alignment including dressing & ramming of the excavated earth, as per direction of engineer in charge.
5
Providing and applying primer coat with bitumenemulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.70kg/sqm using mechanical means as per technical specification clause- 502
6
Providing and applying tack coat with bitumen using pressure distributor at the rate of 0.35kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per technical specification clause503
7
Providing, laying and rolling of open graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 80-100 KN capacity, finished to required level and grades to followed by seal coat as per Technical specification clause - 508
8
Providing and laying seal coat Type C by manual means with 80/100 grade bitumen sealing the volds in a bituminous surface laid to the specified levels, grade and cross fall as per Technical specification clause - 510(III) (1)
9
R.C.C. Work (1:1.5:3) ratio cement coarse sand & 20mm guage stone grite i/c labour materials T&P............etc complete.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
