Construction of lintel and latrine on the vacant space in Parshuram Dharamshala in village Surajpur Mahanwa (VK Baghpat) - Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5 m in width as well as 10sqm on plan including getting out and disposal of excavated earth upto 50m and lift upto 1.5m,as directed by Engineer Incharge in cartage DSR 2.8.1. 2 Diluting and injecting chemical emulsion for post constructional antitermite treatment.treatment of soil under existing floor udsing chemical emulsion @ one litre per hole,300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1:2 (one cement:2 coarse sand DSR NO 2.35.3.1 3 P/LayingIN position cement concrete of 1:4:8 ( 1cement:4coarse sand: 8 graded stone aggrgate 40mm nominal size derved from natural sourse DSR NO 4.1.8. 4 Brick work with common burnt clay (non modular) bricks of class desination 7.5 in foundation in cement mortar 1:6( 1 cement :6 coarse sand ) DSR NO6.1.2. 5 providing and laying in position specified grade of reinfocement cement concrete, excluding the cost of centering and shuttering upto plinth level in1:1.5:3 I (1cement:1.5 coarse sand:3 graded stone grite 20mm nomina size DSR NO 5.1.2 6 Reinforced cement concrete work in beams, suspended floors ,roofs, having slope upto 15 degree landing, balconies, shelves, chajjas , lintels bands.plain window sills, above plinth level.uptofloor level five .excludingthe cost of centering and shuttering,finishing and reinforcement with 1:1.5:3 drived from natural source DSR N05.3 7 Filling avilable excavated earth (excluding rock) in trenches,plinth,sides of foundation etc in layers not exceeding 20cm in depth ,consoliding each deposited layer by ramming and watering upto all lift5th km lead DSR NO 2.25(a) 8 supplying and filling in plinth with sandunder floor, including watering, ramming,consolodating and dressing complete.DSR N02.27 9 Brick work with common burnt clay machine non moulded perforated bricks class desination 12.5 confirming to IS2222 in Super structure above plinth level upto floor level five in cement mortar 1:6 DSR NO 6.32.2 10 Half brick masonry with common burnt clay non modular bricksof class desination 7.5 in super structure above plinth level upto floor five in cement mortar1:4 DSR NO6.13.2 11 Providing and fixing Angle iron frames for doors, windows and ventilator of mild steel Angle section , jointed mitred and welded by angle iron to the existing T- iron frame or to the wall and dash fastener, including fixing of necessary built hinges and screws and applying a priming coat of approved steel primer all complete asper direction ofEngineer incharge.DSR 10.31 12 Providing and fixing ofsteel work welded in builup section in grating,frames ,guard bar ladder railing brakets ,gates and similar work position and applying a priming coat of approved steel primerDSR NO 10.25.2 13 Providing and fixing of 1 mm thick M.S.Sheet garge door with frame of 40×40×5mm angle iron 3.15mm thick Gusset plate at the junction and corners using M.S.Flat 405 mm for diagonal bracing and central places including supply and fixing of necessary fittings as per ) DSR NO 10.5.1 14 providing and laying in position cement concrete in sill of window andhold fast .excuding cost of centering and shuttering DSR 4.1.2 15 Steel reinforcement for R C Cwork including strainthening, cutting, bending,placing in position and binding all complete Fe 500 D .DSR NO 5.22.6 16 S/F of fan box etc all complete. As per DSR NO10.18 17 12 mm thick plaster over wall of 1:6 cement & Coarse sand mortar over even surface including supply of all materials, labour and T&P etc. as per DSR NO 13.4.2 18 15 mm thick plaster over wall of 1:6 cement & Coarse sand mortar over rough surface including supply of all materials, labour and T&P etc. as per DSR NO.13.5.2 19 12 mm thick plaster over wall of 1:4 cement & coarse sand mortar over even surface including supply of all materials, labour and T&P etc. as per DSR NO13.4.1 20 15 mm thick plaster over wall of 1:4 cement & coarse sand mortar over rough surface including supply of all materials, labour and T&P etc. as per DSR NO 13.5.1. 21 S/Fixing of glass stripsfor 4 mm thickness in joint of floor etc all complete. as per DSR NO11.13.1 22 40mm thick P.C.C. flooring in 1:2:4 cement coarse sand and 20mm stone gritfinished with a floating coat of neat cement,including cement slurry.complete. 40mm thick Asper DSR NO11.3.1 23 Making Khurra 45x45cm with C.C. 1:2:4as per DSR NO 12.22 24 P/Fixing of 110mm dia Rain water P V C down pipe with bendall complete. as per DSR NO12.41.2. 25 Making of drip coarse in sunshade or facia with 1:3 cement and fine sand mortar i/c all complete.as per S.I.No. 13.20 New Item 26 Cutting of groove in plaster completeasper S.I.No. 21.20 New item. 27 Distempering two coat with oil bound distemper of approvedbrand i/c all complete as per DSR NO 13.41.1 28 Finishing of wall with two coat of water proofing cement paint of approved quality and makeas per DSR NO13.44.1.. 29 Providing wall putty 2mm thick over new surface of approved quality and brand like Berger/j.k./Birla or similar two coats as per DSR 13.26. 30 Two coats of painting or varnishingwork with readymix enamel paints in smallarea or new wood work as perD S R . 13.58 31 Providing and fixing M.S. holder-bat clamps of approved design.[DSR 12.38.1 32 Supply and Fixing of 20 mm thick Kota stone in flooring and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12 mm thick base coat in 1:2 with cement and coarse sand mortar and polished with hand machine required for proper completion of work as per DSR NO11.26.1 33 S/fixing of 3 mm thick glass panes including for proper completion of work as perD S R NO14.5.1 34 10mm thick average mud phaska of damoed brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa@35kg per cum of earth and gobri leaping with mix1:1(1 clay:1 cow dung) and covered with flate tile bricks,grouted with cement mortar1:3(1 cement:1 fine sand with 2% of integral water proofing compound by weight of cement and finished neat DSR NO12.16.1 35 supply and fixing Galvanised mos quitos proof heavy quality iron wire gauge or expended metal heavy quality over windos and including supply supply flat iron 25mmx4mm and including,supply of necessary screws all materials, labour T&P etc required for proper completion of the work DSR NO10.29.1 36 Centering and shuttering including stutting,proppingetc,and removing of form beam,slab,bandDSR NO 5.9.3 37 Centering and shuttering including stutting,proppingetc,and removing of form collumn n5.9.6 38 Suppy and fixing sign boardwith black grainite stone in brick pillar and complete with all respect. 39 Wiring point for light with 1.5 sqm. mm. P.V.C.insulated multi stand Copper conductor cable in P.V.C. conduit pipe with 1.5 sqm. P.V.C. insulators wire as earth wire drawn in side as per (S.I. No. 131-C ) 40 Wiring Point for fan same as item no. 42 Complete item (S.I. 133-C) 41 Same as above item No. 1 but for plug point 5 AMP complete item (S.I. No. 134-c) 42 Supply and fixing ofbattan / angle holder complete in all respect as per (S.I. No. 405) 43 Supply and fixing ofrecess/surface/Pendent mounting round to 15 to18 watt LED Down lighter having powder coated as per (S.I. No. 1402-Cat-A). 44 Supply and fixing of50 Amp to 63 Amp. SPMCB (10KA) Fixing complete item cat-A as per.(S.I. No. 1003-B) 45 Supply and fixing of6 Amp to 32 Amp. SPMCB (10KA) Fixing complete item CAT-A as per.(S.I. No. 1002) 46 Supply & fixing of 480mmx480mmx200mm size of M S Boxdeep in sunk for housing BDB/TPN febricated from 16 gauge M S sheet i/c all.(S.I. No. 1114(A). 47 Supply and fixing of power plug with 15 Amp/250 V Flush type switch and flush type three pin socket etc.(S.I. No. 1139) 48 Supply and fixing of 2/3/4 ways round steel junction box confirming to ISI for 20mm dia PVC conduit concealedin wall i/c all. S I No.157 49 Supply and fixing of switch box made up 16SWG (1.5 mm) thick M S sheet of 250X300X65 mm size duly painted with red oxside primer and flushedin wall i/c all. S I No.164 50 Supply and wiring of submain with two number 4 sqmm FRLSH PVC Insulated 1100V grade multisrand core copper conductor cable with 20 mm dia heavy rigid steel conduit on surface as per S.I.No.216(B). 51 GST 18% as per rule
