|
| 1 | AR |
| 2 | 122.1.2:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*6 sqmm |
| 3 | 122.2.14:Fabrication, supplying and fixing class B galvanised single overhang arm bracket made out of 250mm long galvanised top tube with cap and 1000mm long 32 mm dia galvanised pipe with tightening bolts complete as required. |
| 4 | OD7685/2024-2025:Providing and laying in position M25 grade reinforced cement concrete foundation ofsize 450 mm (L) ×450 mm wide and 1000 mm deep i/c excavation of earth,providing cutting, bending and placing in position, reinforcement of cold twisted barsof 12 mm dia- 960 mm long(approx)-8 nos. and reinforcement of cold twisted bars of8 mm dia- 1400 mm (approx) -6 nos.(with 150 mm spacing) as required withsupplying and positioning of 4 nos. foundation bolts 16 mm dia,600 mm long, J typei/c 2 nos. template anchor plates of size 225mm×225mm×3mm andproviding DWC HDPE for cable entry and exit as required for 3 m and 5 mtr pole. |
| 5 | OD7686/2024-2025:Fabrication, supply and erection of 5.0 mtr height, minimum 3 mm thick, bottom diaof 130mm & top dia of 70mm base plate of size 225 x 225 x 12 mm thick flangemounted hot dip galvanized octagonal pole made from HT steel plate, window withflash cover with full verticle window cover at appropriate height from the base plateon existing cement concrete pedestal as required. i/c supplying and fixing of 6 mmthick laminated mounted sheet inside the window mounted on and i/c providing andwelding 3 nos. GI strips 4 mm thick of suitable length and having suitable size tappedholes as reqd, terminal block suitable for 25 sq mm conductor – 4 nos. &shorting links on DIN channel of suitable length, 6 Amp. SPMCB ‘C’curve characteristics, earth stud, cable support clamp suitable for upto 4x25 sqmmcable. logo/Name of manufacture shall be either embossed or rivited plate on the pole.Galvanization as per relevant IS code etc as required. |
| 6 | DSR 2022 |
| 7 | 7.5.1:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm |
| 8 | 7.6.1:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size in the existing masonry open duct as required.Upto 35 sq. mm |
| 9 | 5.2:Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required |
| 10 | 5.12:Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 11 | 5.18:Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 12 | 1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm |
| 13 | 14.6:Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres. |
| 14 | 14.8:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required. |
| 15 | 14.15.1:Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.63 mm· dia (OD-63 mm & ID-51 mm nominal) |
| 16 | 14.16.1.a:Supplying and laying of following size DWC HDPE pipe lSI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 17 | 12.37:Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. |
