|
| 1 | Supply and fixing of 33 K.V. pin insulator with pin and nut bolt on main terminal gantry and making other connection. |
| 2 | Supply and fixing of 33 K.V. 400 Amp bus type isolator of approved quality and make will all necessary material required for proper fixing on structure including all material labour T & P etc. for proper completion of work. |
| 3 | Supply and fixing of 33 K.V. 400 Amp line type isolator of approved quality and make will all necessary material required labour T & P etc. required for proper fixing on structure including all material labour for proper completion of work. |
| 4 | Supply and fixing of 33 K.V.-10 K.V. lightening arrestor set (3 Nos) of approved quality and make with all necessary materiallabour T & P etc. for proper fixing on structure and completion of work. |
| 5 | Supply and fixing of 33 K.V.CT of 200/100/1 Amp of approved quality and make with all necessary materiallabour T & P etc. for proper fixing and completion of work. |
| 6 | Installation, testing and commissioning of 33 K.V.VCB 1000MVA 1250 Amp including loading unloading erection of the same of plinth and making all necessary connection etc. as per direction of E/Ich. |
| 7 | Installation, testing and commissioning of 5 MVA power T/F including loading unloading erection of the same of plinth and making all necessary connection etc. as per direction of E/Ich. |
| 8 | Fixing of incoming pannel/Bus coupler 1200Amp 11 K.V. VCB C.T.R. 800/400/5 Amp 33 K.V.CT of approved quality and make with all necessary materiallabour T & P etc. for proper fixing and completion of work. |
| 9 | Fixing of outgoing feeder pannel 1200Amp 11 K.V. VCB C.T.R. 400/200/5 Amp of approved quality and make with all materiallabour T & P etc.required for proper completion of work. |
| 10 | supply and fixing of protection cum control pannel incoming 33/11 K.V.5MVA single transformer of approved quality and make with all necessary materiallabour T & P etc. for proper completion of work.Make-Crompton/ABB. |
| 11 | supply and fixing of 24 Volt battery (Exide) with charge with cabinet of approved quality and make complete with all materiallabour T & P etc. for proper completion with all respects. |
| 12 | supply and laying of following type copper control cable at the depth of 0.75 mtr below ground level over cushion of fine sand and protected with burnt brick complete with all materiallabour T & P etc. for proper completion of work. |
| 13 | (A) 2 core 2.5mm2 |
| 14 | (B) 4core 2.5mm2 |
| 15 | (c) 6 core 2.5mm2 |
| 16 | supply and laying of following type high conductivity \"AL\"stranded compact circular conductor XLPE armoured 11 K.V. grade cable netural earthed systemof the depth of 1 mtr below G.L. over a cushion of 75mm thick sand all round and protected with burnt brick an side and an top of cable shall be properly connected with the earth conductor by clamp etc.with the cost of all materiallabour T & P etc.required for proper completion of work. |
| 17 | (A) 3x50 sq.mm(SI.No.506/07) |
| 18 | (B) 3x300 sq.mm(as per analysied) |
| 19 | supply and fixing of jointig of indoor termination 11 K.V. jointing kit (Raycheme/Mahindra) or equivalent make as per approved of 11 K.V.grade including cost of materiallabour T & P etc.for proper completion of work as per direction of E/Ich. |
| 20 | (A) 50sq.mm |
| 21 | (B) 300 sq.mm |
| 22 | supply and fixing of jointig of outdoor termination 11 K.V. jointing kit (Raycheme/Mahindra) for 11 K.V.grade including cost of materiallabour T & P etc.for proper completion of work as per direction of E/Ich. |
| 23 | (A) 50sq.mm |
| 24 | (B) 300 sq.mm |
| 25 | supply and earthing of substation outdoor/indoor equipment earth mat.Incuding M.S. rod (back) size 32 mm dia it shall be buried 0.75 Mtr below the ground level all structure and equipment shall be connected to the ground mat by means of M.S. flat (galvanized)size 32x6mm earthed at two point already provided in the switch gears body T/F, body and netural shall however be earthed by 2 Nos M.S. flat size 32x6mm (G.I.) D.C. board,battary charger,OL Tc pannel etc shall be earthed at two point by means of M.S. G.I. flat 25x6mm the ground mat shall be earthed at member of point by means of earth rod (ground electrod)32mm dia 3 mt. long all joint as well as tapping point in the ground mat shall be properly welded painted with black paint to avoid rusting and there after covered by jute served with black paint complete in all materiallabour T & P etc. as per direction of E/Ich. |
| 26 | S/E of 33 K.V. line isolator/Busbar Isolator structure made of 125x63mm 13.1kg/mtr. channel at a height of 2.8 mtr. Above ground and 1 meter below ground on a cement concrete pad of 75mm thick with 1:3:5 cement concrete foundation including excavation back filling making plinth of required height & with required febrication for obracing of M.S. flat 50x6mm 2.0Mtr. and top of M.S. angle 75x75x8mm 8.9 kg/mtr. as per drawing complete in all respect as per direction of E/Ich. |
| 27 | S/E of the lighting arrestors/post Insulator/C.T. structure made of M.S. Channel100x50mm 7.9 kg/mtrs. top of M.S. angle 50x50x6mm 4.5 kg/mtrs lighting arrestors/post Insulator are to be mounted on M.S. plate of 200x150x8mm height of structure is to be 2.8 mtr.above ground and 1 mtr below ground on a 75 mm thick cement concrete pad with 1:4:8 cement concrete foundation making plinth of required height including all febrication as per drawing complete in all respect as per direction of E/Ich. |
| 28 | Supply and erection and constructionof plinth and foundation of M.O.C.B./V.C.B. complete with all material labour T & P etc.complete in all respects. |
| 29 | Construction of 10 M.V.A. power T/F plinth 3.00x3.00 Mtr.etc.complete with all material labour T & P etc. required for proper completion of work as per drawing and detais attached and as per direction of E/Ich. |
| 30 | Supply and fixing of 33 K.V.post Insulator of approved quality and make with all necessary material required for proper fixing on structure including all material, labour T & P etc.required for proper completion of work.as per direction of E/I. |
| 31 | S/E of Busbar Gantry structure of R.S. joist-150x150mm 37kg/mtr. 5.2 meter above ground level and 1.20 meter below in 1:3:6 cement cocrete foundation mounted on a stone pad of 300x300x75mm including earth excavation back filling making plinth of required fabrication as per drawing complete in all respect as per direction of E/I. |
| 32 | S/E of Terminal Gantry structure of R.S. joist-175x85mm 19.5kg/mtr. 6.1 meter above ground level and 2:3:1 cement cocrete foundation mounted on a stone pad of 300x300x75mm including earth excavation back filling making plinth of required fabrication as per drawing complete in all respect as per direction of E/I. |
| 33 | S/E of double pole struture made by 2 Nos of 410 S.P.-61 12.00 mtr long S.T. pole duly grouted plinthes plastered with 1:3:6 cement cocrete suitable for different type of M.S. channel and angle iron duly fabricated for disc fitting T.P.M.O.,D.O. fuse set out side droped bracing including cost of material labour T & P etc. required for proper completion of work. |
| 34 | Supply and fixing of 11 K.V. T.P.M.O. set complete in all respects. |
| 35 | Supply and fixing of 11 K.V. D.O. fuse set complete in all respects. |
| 36 | Supply and erection of lightening arrestor set (3 Nos) suitable for mounting on steel support complete with all material labour T & P etc. required for proper completion of work. |
| 37 | Supply and erection of 11/0.433 KV 50 C/S 3 phase naturally cooled distribution Crompton/Kirloskar/ABB/AREVA transformer.Make:-(A) 63 KVA UPPCL Stock Issue Date 2023 |
| 38 | S/B of 600mmx600mmx3mm copper plate verticaly for earthing with it top atleast 3 mtr below G.L. complete with 20mm dia G.I. pipe and funnel for watering and 1 earthing lead of 1 No 8 to 10 SWG G.I wire in 15mm dia G.I. pipe, plate up to switch board (from appron to switch board the cost of G.I. pipe and G.I wire will extra) 30Cm C.I. frame with hinged cover masonry housing Alternate layers of charchole/coke and solt etc. as per direction of E/Inch. complete in all respects. 704/18 |
| 39 | S/E of TPN distribution piller fabricated with wire clade dust and vermin proof as per drawing consisting suitable copper bus bar 60mmx10mm or equivalent cross sectional area consisting on henley\"s patteren fuse unit set complete as follows matallic piller shall be made of 14 SWG MS sheet on frame of angle iron of 35mmx35mmx5mm duly with both 2 coat of approval paint over rust resisting primer both side locking arrangement handle & danger board complete with suitable nasonary plate-form for mounting of piller. The piller shall have earthing terminal as per direction of E/Inch. |
| 40 | S/F of 2.45 meter high cage fabricated with 3mm thick expended metal/wire mesh of equipment weight on 50mmx50mmx6mm angle iron frame having vertically member speceed at 1 to 1.25 mtr and horizontal member spaced 1 mtr the vetical member shall be grouted in floor and horozental member in the wall to a depth of 300mm with and end forked the case shall have 2000mmx1000mm size of one leaf door with locking arrangement divice with 35mmx35mmx3mm angle iron and 3mm expended metal duly fixed wih the cage member with hinsied etc. The case shall have painted with red oxied primer and senthtick enamal paint the job inclueds all meterials labour T&P for proper complition of work 1/42/18 |
| 41 | S/E of S.T. pole 9.00 mtr long designated 410 S P.32 in 1:36 C.C foundation including excavation back filling etc. complete in all respects. |
| 42 | S/L of \"Al\" conductor P.V.C. insulated armoured served sheathed cable 1100 v. grade at a depth of 750mm. Below ground level over a cushion of 75mm. Thick sand alround and projected with burnt bricks on side an top on surface the cable run shall be fixed on MS clamp of suitable size or as dorection of E/I. complete in all respects. The armouring of cable shall be properly connected with the earth conductor by clamp. 501(2) (16 Sq.mm 4 core) SOR-2018 Page No 127 |
| 43 | S/F of palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making conections complete in all respects as per direction of E/Inch. 504D (A) 16 sq.mm SOR-2018 Page No 128 |
| 44 | S/F 10mm G.I octogonal pole of approved make 8 to 100 mm and base plate 16mm thick having 3mm thickness with single arm bracket 1 metre length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation and back filling and required T&P complete in all respect (Make Bajaj, Phillips, Surya) SOR-2018 Item no 649 Page No 134 |
| 45 | Supply and fixing of 63 Amp 415 V metal clade T.P.N Wewireable type switch fuse unit, on angle iron bracket couplete in all respects |
| 46 | Supply and fixing of 3\"x6\"x4\" D.B of 16 SWG M.S. sheet on pole including 30 Amp kit kat 40 mm dia G.I. pipe etc as per direction of E/I |
| 47 | Supply and laying of G.I. Pipe B class for cable complete with support by 20x3mm M.S. clamp of 3 Nos all complete |
| 48 | (A) 80mm dia |
| 49 | (B) 150mm dia |
| 50 | Supply and laying of 1800mmx900mmx12mm thick chequered rubber matting of tested quality. 1196/07 |
| 51 | Supply and fixing fire extinguisher dry chemical type 10 kg capacity (ISI marked) complete with initial charge and wall bracket along with supply of all material labour T & P for proper completion of work. 1132/07 |
| 52 | Supply and fixing of fire bucket round bottom mude of G.I sheet 9-11 litters capacity duly painted as per fire brigade design supported on banding bracket chained and locked initially filled with fire recover sand water as per direction of E/lch. 1133/7 |
| 53 | Supply and fixing of shock treatment chart (Prescribed under I.E. rules) duly farmed with glass and supported from back with hard ot shoft board with supply of all material labour T & P for proper completion of work. 1134/07 |
| 54 | Supply of 33/11 KV 10 MVA. DYN 11 copper wound Delta stare, out door type transformer with off load changer to I.S. Conforming to I.S. 2026 part 184 and approved in Stock issue date UPPCL 2023 UPPCL/UPDVNNL. Make:- Crompton/Kirloskar/ABB/AREVA |
| 55 | Supply of incoming, outgoing & bus cuppler as per following details:- |
| 56 | (a)SupplyofKirloskar/Crompton/ABB/ALSTOM make Manually operated (incoming) 11 Kv.3 Phase, 3 wire, 50 cycles, Effectively earthed, 1200 Amp, 350 MVA, fault level Vacume circuit Breaker all steel totally enclosed, fully interlocked, indoor industrial pattern, metal clad, vertically insulation Horizontal draw out, floor mounting Main Bus Bar & earth Bus Bar shall be of Aluminum, HT Switch Board equipped with Fabricated Sheet Steel Housing-1 No, Mechanical Interlocks-1Set, 630 Amp Singal Pole, Isolating Plugs socket-6 Nos |
| 57 | 631 Amp Triple Pole, circuit Breaker fitted with spring assisted manually closing tripping mechanism with mechanical ON/OF indicator suitable for rupturing capacity of 350 MVA at 11 KV Containing 1-3 Phase 3 limb 11000/110 Volt burden 100 V.A. per ph. Accuracy class-1 PT with Draw able type, air cooled, CTs ratio 800/400/5 Amps having accuracy class-1 for metering & protection including Red Green & White indicating lamps for Breaker ON/OF/TRIP & Circuit Healthy. |
| 58 | 1 No. Triple pole IDMT relay having tywo over current & one earth fault element CDG-61 High Set instantaneous stand by earth fault relay. |
| 59 | 1 No. Strip Heater |
| 60 | 1 No. Amp Meter with Selector Switch |
| 61 | 1 No. Volt Meter with Selector Switch |
| 62 | 1 No. 24 VDC shunt strip coil. |
| 63 | 1 No. KWH Meter with MDI |
| 64 | 1 No. Power factor Meter |
| 65 | 1 No. Frequency Meter |
| 66 | 1 No. Hooter. |
| 67 | (b) Supply of Kirloskar / Bicco LAWRIE/ALSTOM/ Equivalent make Manually operated (outgoing) 11 Kv.3 Phase, 3 Wire, 50 Cycles, Effectively earthed 1200Amp, 350 MVA, fault level Vacume circuit Breaker all steel totally enclosed, fully interlocked, indoor industrial pattern, metal clad, vertically insulation Horizontal draw out, floor mounting Main Bus Bar & earth Bus Bar shall be of Aluminum, HT Switch Board equipped with: |
| 68 | Fabricated Sheet Steel Housing-1 No |
| 69 | Mechanical Interlocks-1Set |
| 70 | 630 Amp Singal Pole, Isolating Plugs socket-6 Nos |
| 71 | 631 Amp Triple Pole, circuit Breaker fitted with spring assisted manually closing tripping mechanism with mechanical ON/OF indicator suitable for rupturing capacity of 350 MVA at 11 KV Containing 1-3 Phase 3 limb 11000/110 Volt burden 100 V.A. per ph. Air cooled, CTs ratio 400/200/5 Amps having Accuracy class-1 for metering & protection including Red Green & White indicating lamps for Breaker ON/OF/TRIP & Circuit Healthy. |
| 72 | 1 No. Triple pole IDMT relay having tywo over current & one earth fault element CDG-61 High Set instantaneous stand by earth fault relay. |
| 73 | 1 No. Strip Heater |
| 74 | 1 No. Amp Meter with Selector Switch |
| 75 | 1 No. 24 VDC Shunt strip Coil. |
| 76 | 1 No. Power Factor Meter. |
| 77 | 1 No. Hooter. |
| 78 | 1 No. Auxillary relay for OTI alarm & trip |
| 79 | 2 No. Auxillary relay for WTI alarm & trip |
| 80 | 3 No. Auxillary relay for Buchholz alarm & trip |
| 81 | c) Supply of 33 K.V.V.C.B 1000 MVA 1250 Amp out door type of approved quality and make with necessary all materials lab our T & P etc. complete. |
| 82 | Supply and fixing of P.G. clamp/T. clamp etc suitable for Panther/Dog ACSR conductor complete as per direction of E/Ich. |
| 83 | S/E of over head line with ACSR conductor on pole/service bracket including binding etc. complete in all respects SINo 627/07 |
| 84 | Supply, and fixing of cable stand 2.5 mtr long made of 125x65mm channel iron 2 Nos complete in all respects |
| 85 | Supply and fixing of 35mmx3mm G.I. Strip from earth electrode complete in all respects 717/07 |
| 86 | Supply and fixing of cable tray of G.I. Sheet on wall cutting grouting of nut bolts etc complete. |
| 87 | Supply and laying of 20mm size stone grit. |
| 88 | Supply and fixing of 33 K.V. disc insulator (B&S type sutiable for 12000 Kg) including gun fitting on cross arm/ clamps fixed on poles conplete in all respects as per direction of E/I. |
| 89 | S/E of 33 K.V. potential transformer (P.T.) outdoor, epoxy cast, impregnated minimum oil filled, single phase PTR 33/KV/3/110/3 burden 100/50/10VA, class 1.0/0.5 etc complete as per direction of E/I |
| 90 | S/E of 11 K.V. Bus coupler VCB having Bus bar chamber and metering etc all complete as per direction of E/I. Kirloskar / Crompton/ABB/ALSTOM make. 2/0 34/AACA/M506 |
| 91 | Supply and erection of S.T. pole 13.00 mtr designated 410 SP 67 including base plate in 1:3:6 cement concrete foundation excavation back filling etc. complete in all respects as per direction of E/l Analyisis Attached |
| 92 | Supply and fixing of \"V\" shape cross arm of 100mmx50mm (1.56/KG/Mtr.) channel on poles including half clamp pins for 33 K.V. pin insulator complete with red enamel paint as per direction of E/I. A.R |
| 93 | Supply and fixing of 2.50 Mtr long cross arms of 125mmx65mm channel on poles eye bolts red enamel painting etc. complete, as per direction of E/IA.R. |
| 94 | Supply and fixing of M.S. clamp 75x10mm flat with packing piecies for fixing of cross arms on poles with bolt, nuts and washer etc duly painted as per direction of E/IA.R. |
| 95 | Supply and fixing of 2.50 Mtr long cross arms of 65mmx65mmx6mm angle iron on poles including clamps eye bolts red enamel painting etc. complete as per direction of E/IA.R. |
| 96 | Supply and fixing of 33 K.V pin insulator with G.I. Pin on pole complete in all respect. |
| 97 | Supply and fixing of 33 K.V disc insulator (B&S type sutiable for 7000 Kg) including gun fitting on cross arm/ clamps fixed on poles conplete in all respects as per direction of E/I.A.R. |
| 98 | Supply and fixing of \"F\" shape bracket/top channel on poles including clamps pin for 33 K.V. pin insulator etc complete in all respects as per direction of E/IA.R. |
| 99 | Supply and fixing of 33000 V danger boards and barbed wire on poles as per direction of E/IA.R. |
| 100 | Supply stringing and sagging of over head HT/composite/LT main with suitable size of ACSR conductor of poles including binding etc. complete in all respects as per direction of Ε/ S1.627/18(Panther) |
| 101 | Supply and fixing erection of stay set at least 3.5 Mtr Ncomplete with galvanized 19mm dia 1.8 Mtr long stay rod 30cmx30cmx6.3cm anchor plate thimble stay clamp stay insulator 19mmx600mm double screw tightener 7/3.15 GL Stay wire etc in 1:3:6 cement concrete foundation complete in all respects as per direction of E/I SI 631/18 |
| 102 | Supply and erection of hexagonal/cradle type guards of G.1. Wire (4t08) SWG including binding etc. complete in all respects. SI. 629/18. |
| 103 | Painting of electric pole with two coats of aluminum paint over one coat of red oxide primer as per direction of E/I.SI.634/18. |
| 104 | Supply and burrying of earth rod 20mmx2.5Mtr long including G.I. Wire 7/16 SWG to connect earth rod and earth clamp on pole 3.00 Mtr long steel conduit to carry earth wire along pole complete as per direction of E/I.A.R. |
| 105 | Supply and erection of double pole structure with 2 Nos 13.00 Mtr long steel tublar poles 410 SP 67 in 1:3:6 C.C. including 2 Nos channel cross arm of 100mmx40mm one Nos channel cross arm of ladder stand of 65mmx65mmx5mm angle iron dropped and brasing etc. necessary nut, bolts, packing pieces complete with painting etc as per direction of E/l. Analysis. Attached |
| 106 | Numbering of poles with making yellow colour blue of size 6\"x6\" and number with black colour paint over yellow colour block of 3\" and as per direction of E/I.A.R. |
| 107 | S/Erection and sagging of over head line with G.I wire No. (4) to 8) SWG G.I. On poles including binding etc. complete in all respects as per direction of E/I.SI.628/18 |
| 108 | S/Laying of 3 core standard aluminium conductor XLPE cable cross linked polyethylene insulated PVC bedded galvanished (A) 300 sq.mm 3 core |
| 109 | S/F of jointing of out door type 33 KV jointing Kit suitable for following size cable including the cost of all material labour T&P requirerd for proper completion of work.A.R. (A) 300 sq.mm 3 core |
| 110 | S/Laying of 150 mm dia hume pipe including supply of all material T&P etc complete in all respects. A.R. |
| 111 | S/F aluminium P.G. clamp for DOG to DOG conductor.A.R. |
| 112 | S/L of 150mm dia G.I. pipe at a depth of 900mm ground level as cable carrier as per direction of E/Ich.A.R. |
| 113 | S/E of four pole structure with 4 nos 13 mt long ST pole 410 SP-67 in 1:3:6 C.C. foundation with 4 nos channel 100x40mm, and 4 nos 65mmx65mm x5mm angle iron & branching etc. Necessary nuts bolts complete with painting Jetc. as per direction of Ellnch. Analysts Attece |
