Tender For Construction Of Operation-Cum-Security Room For New Automatic Gate At P.P. Unit Main Gate., Installation Of Air Tight Upvc Window At The Backside Of The Main Building And Installation Of Air Tight Upvc Window In The Administrative Main Bui
Tender Value
11.28 Lakhs
Estimated cost
Bid Submission
09 Jan 2025
0 days left
EMD
11285
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Operation-Cum-Security Room For New Automatic Gate At P.P. Unit Main Gate., Installation Of Air Tight Upvc Window At The Backside Of The Main Building And Installation Of Air Tight Upvc Window In The Administrative Main Building
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation in alltypes of soil for site leveling, foundation, pits, trenchesand other civil works up to and including 1.5 metre lift and stacking the soil upto a lead of 100 metre and including dewatering, removing slush,shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge. |
| 2 | Supplying offilling sand in foundation and over areas including watering,ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of Engineer-In-charge. |
| 3 | Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth: consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge. |
| 4 | Providing and laying plain cementconcrete1:4:8 (1 cement: 4 sand: 8 stoneaggregate 40mmnominal size) as levelling course in foundation and plinth etc. includingtempering, curring ,shuttering etc. complete all depth and height. |
| 5 | Fly Ash brick masonary work using (250mm x 120mm x 80mm) size Fly Ash bricks having crushing strength not less than 75 kg/cm2 in cement mortar mix (1:6) on (250mm thick) masonary walls after immersing the bricks for 6 hrs in water before use in Foundation & plinth and similar type of work as per drawings. including cost, conveyance, all taxes, royalties, loading and unloading of all materials, including cost of all labour, scaffolding, wateringand curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 6 | Fly Ash brick masonary work using (250mm x 120mm x 80mm) size K.B bricks having crushing strength not less than 75 kg/cm2 in cement mortar mix (1:6) on (250mm thick) masonary walls after immersing the bricks for 6 hrs in water before use in Superstrure and similar type of work as per drawings. including cost, conveyance, all taxes, royalties, loading and unloading of all materials, including cost of all labour, scaffolding, wateringand curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 7 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 Grade having a crushing strength of in 15cm cubes at 28 days after mixing adn tests conducted in accordance with IS 456 and IS 516 in footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies,Column, Beam Parapets, Window sills, Lofts, Railings etc. with 12mm to 20mm size black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumb and finishing the exposed surfaces smooth including cost of scaffolding, centering & Shuttering, watering and curing for the required period including cost of all materials with taxes, royalties transportation, loading and unloading, all labour, sundries, T&Pincluding hire & running charges of concrete mixer and vibrator etc complete as per the direction of the Engineer-in-charge but excluding the cost of materials and labour for reinforcement bars , centering and shuttering for the work. |
| 8 | Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding (Bindingwire to be used as per the IS code) etc. all complete as per direction of Engineer-in-charge.Cold Twisted bars, Thermo-Mechanically-treated bars. |
| 9 | Providing strong, rigid, leveled and plumbed centering and shuttering to required shape and size for all kinds of R.C.C. works in the items mentioned below with wooden centering materials with all necessary bracing, ties and supports with level centering covered with bituminous paper including provision of necessary holes and pockets, fan hooks or boxes, switch and board insert plates, clamps and extension bars etc. as per the direction of the Engineer-in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete. |
| 10 | 12mm cement plaster on external RCC/brick surfaces in cement plaster 1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 11 | 16mm cement plaster on external RCC/brick surfaces in cement plaster 1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
| 12 | Providing and applying to outside walls with two or more coats ofAnti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-Charge at all elevations including all material labour complete. |
| 13 | Supplying, fitting and fixing of powder coated M.S. grill made out ofM.S. square bar / M.S. flats / M.S. angles as per approved drawing properly, finished smooth and sand papering, including cost, conveyance, taxes of all materials, required screws, cost of all labour, T & P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 14 | Providing & Applying priming one coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete at all floors and all heights. (External Surface) |
| 15 | Providing and applying to inside walls with two or more coats of Plastic Emulsion paintwith Putty after one coat primer including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-chargeincluding all material labour complete. |
| 16 | Providing & Applying priming one coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete at all floors and all heights. (Internal Surface). |
| 17 | Painting two coats with synthetic enamel paint of approved quality and approved sahade confrming to ISI on steel/wood work to give an even shade over a coat of primer of approved qality and shade including sand papering and making the surface smooth in all floors at all heights including cost, conveyance, loading, unloading, taxes of all materials, labour, sundries, T & P scaffolding required for the work and complete in all respect as per specification and directions of Engineer-in-charge. |
| 18 | Providing and laying Vitrifiedfloor tiles 600x600 mm (thickness to be specified by the manufacturer) 1st qualityof NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction ofEngineer-In-Charge at all floors and all heights. |
| 19 | Providing and laying Vitrified Skirting tiles 600x600 mm (thickness to be specified by the manufacturer) 1st qualityof equivalent approved make, colours & shades laid on 12 mm thick cement mortar 1:3 (1cement: 3coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction ofEngineer-In-Charge at all floors and all heights. |
| 20 | Supplying, fitting, fixing up Door (sliding type) made up approved powder coated aluminum Section 151-154, 151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick Reflective glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge. |
| 21 | Supplying, fitting, fixing up window (sliding type) made up approved powder coated aluminum Section 151-154, 151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick Reflective glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge. |
| 22 | Providing average 25mm thick grading Concrete with (1:2:2) using 6mm black hard granite chips using zycosil water proofingcompound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, conveyance, taxes and sundries, T&P etc. complete as per direction of the Engineer-in-charge. |
| 23 | Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. |
| 24 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for 6A PP looping & external Light connection. |
| 25 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire for 15A PP & Switch Boards & Computer points |
| 26 | Supplying and fixing metal box of 1.63 mm thick following sizes (nominal size) on surface or in recess without cover including cutting the wall and making good the same in case of recessed conduit,also including painting etc as required.150 mm X 75 mm X 60 mm deep |
| 27 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. |
| 28 | Installation, testing and commissioning of ceiling fan on down rod or wall fan on the existing ceiling /surface, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. |
| 29 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.8 way (2 + 6), Double dooras required. (But without MCB/RCCB/Isolator) |
| 30 | Laying and fixing of one number .following size cabledirect in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. ISI mark Aluminum/copper conductor, XLPE insulated cable, FRLS PVC, galvanized steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - I) with latest amendments & complete all as required |
| 31 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required |
| 32 | Supplying 1200 mm energy efficient ceiling fan as per EIC of approved make including with all,., materials & labour. .(Make Usha-Striker or Equiv.-CG/Havells/Bajaj) |
| 33 | Supply, Testing & commissioning of Surface or wall mounting 1 x 10W LEDtube light fitting including 1 no. of10watt LED luminairs as per EIC of approved make including with all,., materials & labour.. (Make WIPRO-Model-LL20-111-XXX-65NE3 makePhilips /HYBEC/ Wipro/ HAVELLS) |
| 34 | Supply, Testing & commissioning of Surface or wall mounting 1 x 20W LEDtube light fitting including 1 no. of20watt LED luminairs as per EIC of approved make including with all,., materials & labour.. (Make WIPRO-Model-D532065/SS makePhilips /CG/ Wipro/ HYBEC) |
| 35 | Supplying and fitting -fixing of Un-plasticised Poly Vinyl Chloride(UPVC) (FENESTAN/NCL VEKA LTD). Three Track-Three Panel sliding windows 60-series duly Manufactured using UPVC reinforced protiles of 108mm x 45 mm x 25mm for outer frames and window sash of 39mm x 58mm x 2.5mm capable of mounting single glazing system, structurally reinforced with hot dip glavanised up to 50microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6mm thick black toughened glass of SAINT-GOBAIN make duly fixedwith EPDM weathering seal resturant and the systemis to be installed using Reinforced Large Coupler at the site using anchore fasteners , silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM-D-638-14,EN-477-95 and other applicable codes and standards. |
| 36 | Dismentaling and removing doors, windows and ventilators including removal of frame, hingesincluding cost of all accessories, labour charges and other applicable codes and standards. |
| 37 | Supplying and fitting -fixing of Un-plasticised Poly Vinyl Chloride(UPVC) (FENESTAN/NCL VEKA LTD). Three Track-Three Panel sliding windows 60-series duly Manufactured using UPVC reinforced protiles of 108mm x 45 mm x 25mm for outer frames and window sash of 39mm x 58mm x 2.5mm capable of mounting single glazing system, structurally reinforced with hot dip glavanised up to 50microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6mm thick black toughened glass of SAINT-GOBAIN make duly fixedwith EPDM weathering seal resturant and the systemis to be installed using Reinforced Large Coupler at the site using anchore fasteners , silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM-D-638-14,EN-477-95 and other applicable codes and standards. |
| 38 | Dismentaling and removing doors, windows and ventilators including removal of frame, hingesincluding cost of all accessories, labour charges and other applicable codes and standards. |
AI Tender Summary
Tender Timeline
Dec 21, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJan 09, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 10, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender