|
| 1 | AS AW Buckstay(H) |
| 2 | AS AW Buckstay(M), AW CS (M) |
| 3 | AS FAB (H) |
| 4 | AS Fab (M) , SS Fab (L) |
| 5 | Auto / Circular damper (including machining and assy) |
| 6 | Autoweld Beams, Box, Bracings, Posts |
| 7 | NTPC Alloy Steel Beam |
| 8 | AW (H) , Machining (L) |
| 9 | AW(M), GF(M) |
| 10 | AW(M), HANGER (M) |
| 11 | Bellow Exp Jnt CS Including Rnd Crn Fab |
| 12 | Bellow Type Expansion Joint - Stainless Steel |
| 13 | Bending & Rolling(M) |
| 14 | Bent Monorail |
| 15 | Bent pin upto Rod D12mm |
| 16 | Bl ExpJnt-Cort/AS-With Rnd Crn Fab |
| 17 | Boiler Trim Piping Supports |
| 18 | Buckstay corner plate with machining. |
| 19 | Casing / Duct Wall (H) |
| 20 | Casing Seal Box for SOFA and Windbox |
| 21 | Casing sheets |
| 22 | Cassette baffle (CS), (AS),(SS without cover plate) |
| 23 | Casting And Forgingmachining above 2 kg upto and including 20 Kg (including Nitriding) (casting and forging supplied by BHEL) |
| 24 | CC TILT/CONNECTING LINK ASSY. |
| 25 | Circular Expansion Bellows including Round corner fabrication |
| 26 | Clevis pin, Welded stud |
| 27 | Coal Comp Assy without Divider Plate |
| 28 | Coal Compartment Assembly with Divider plate With Modified tip |
| 29 | COAL GATE 36 INCHES |
| 30 | Corrugated Sheet |
| 31 | CROWN PLATE |
| 32 | DOOR (28 PG) |
| 33 | Down Spout and Bunker Emptying chute |
| 34 | Drag link assy (inlcuding Anodizing) |
| 35 | Drain Oil Tank |
| 36 | DUCT SUPPORTS - PGMA 48-XX5 GF (H) , HA (M) |
| 37 | End cap |
| 38 | Expansion Plate panel and its Attachment |
| 39 | Fabrication of CC Assy with Divider Plate |
| 40 | Fabrication of coal nozzle tip. |
| 41 | Fabrication of divider plate assembly and welding with machined coalnozzle only(including Nozzle Weight) |
| 42 | Fabrication of divider plate assemblyand guide vane assembly only. |
| 43 | Fabrication of various nozzl tips only (Air, Oil, Vapour, Nozzle tips etc.-Except coal Nozzle tip) above 30Kg, |
| 44 | Fabrication of various nozzle tips only ( Air, oil, vapour, nozzle tips, etc. -Except coal nozzle tip) upto& including 30 kgs |
| 45 | Feeder Assy- 36 \" with Packing Hood |
| 46 | Feeder Comp-Alarm Paddle Assy. |
| 47 | Feeder Comp-SCREW CHAIN TAKE UP, SCREW BELT TAKE UP |
| 48 | Feeder Comp-SHAFT TAKE UP BELT. |
| 49 | Feeder Comp-TAKE UP PULLEY |
| 50 | FeederComp-BELTSCRAPERASSY,scrapperassembly |
| 51 | Fin flat upto10 mm thickness ,carbon steel, alloy steel. |
| 52 | Fixing Pin including Decoiling |
| 53 | Flame Scanner Assy. |
| 54 | Foundation Material |
| 55 | GALVANISED HANDRAILS, Stairs and Ladders (Including hot dip Galvanizing) |
| 56 | Gear machining including Hardening |
| 57 | General Fabrication (Bolted Design) |
| 58 | GF (H) , Autoweld (M) |
| 59 | GF(H) |
| 60 | GF(H), Rolling(L) |
| 61 | GF(M),PP(L) |
| 62 | GF(M), Machining(L) |
| 63 | GF(M), PP(M), HANGER |
| 64 | Girder Pin Connection |
| 65 | Hangers (H), Clamps(L), GF (L) |
| 66 | Hangers (M), Clamps(M), GF (L), AS fab(L) |
| 67 | Hangers (M), Crown pl, AS fab (L) |
| 68 | Hangers (M), GF(M), AS fab (L) |
| 69 | Hangers(H), AS fab (L), GF(L), PP (L) |
| 70 | Hangers(H), GF(M), AS fab(L) |
| 71 | Hangers(L), AS fab (H), GF(L) |
| 72 | Hangers(L), Clamps(H), GF (L) |
| 73 | Hangers(M), AS fab (M), GF (L) |
| 74 | Hangers(M), AS fab(H), GF(L) |
| 75 | Hangers(M), GF (H), AS fab(L) |
| 76 | Heai Guide pipe assembly |
| 77 | HOOD LADDER |
| 78 | Isolation gate |
| 79 | Machining above 200 grams upto 500 grams |
| 80 | Machining above 2kgupto 5kg |
| 81 | Machining above 500 grams upto 2 kg |
| 82 | Machining above 5kgupto 15kg |
| 83 | Machining of components similar to Rail Extension-RH/LH, Drain socket,Rocker shaft lever, rocker shaft, Spherical Rocker , Cable pipe cap assy , precision hex screwabove M30 , coupling nut upto & including M36 ,Turn Buckle,Union M20, Guage Connector, BRG HSG, DRAG LINK CASTING |
| 84 | Machining upto 200 grams |
| 85 | Machining-PGMA weight upto 1MT |
| 86 | Man Hole Door |
| 87 | MARMAN COUPLING |
| 88 | Mill Seal Air System |
| 89 | Mitre / Segmental bend fabrication upto 150 NB out of pipes |
| 90 | Mitre / Segmental bendFabrication above 300NB and upto 600NB out of pipes |
| 91 | Mitre/Segmental Bend fabrication above 150 NB upto 300NB |
| 92 | Mitre/Segmental bend Fabrication above 900NB out of pipes |
| 93 | Mitre/Segmental bend Fabrication above 600NB and upto 900NB out of pipes |
| 94 | Mixing Box Assembly involving pipe fabrication |
| 95 | Modified Coal Nozzle tip with increased Hardness |
| 96 | Modified Windbox Assembly (Involving High Hardness Tips) |
| 97 | Needle gate assy |
| 98 | NUT CAP |
| 99 | Oil gun Components-Cap Nut. |
| 100 | Oil Gun Comp-Removable Part |
| 101 | Oil Gun Comp-STATIONARY UNION ASSY |
| 102 | Oil Gun Rack assy |
| 103 | Oil System Heater Set |
| 104 | OIL SYSTEM HFO/LFO |
| 105 | Oil System Skid assy |
| 106 | Oil system Tray |
| 107 | OilGunComp-GuidePipe&DiffAssy |
| 108 | Orifice Adapter |
| 109 | ORIFICE PLATE |
| 110 | Peg fin |
| 111 | Pinion machining including hardening |
| 112 | Pipe Clamp / Tube clipsupto & including 8mm thick both CS/AS |
| 113 | Pipe Clamp above 8mm thick both CS/AS |
| 114 | Pipe Clamp with guard plateupto & including 6 mm thick both CS/AS |
| 115 | Pipe Clamp with guard plate above 6 mm thick both CS/AS. |
| 116 | PITOT TUBE |
| 117 | Pressing (H), Punching |
| 118 | Punching (H), Pressing |
| 119 | RETAINER A |
| 120 | RETAINER C |
| 121 | Ribbed Deck Sheet, Batt Support |
| 122 | Running Meter, Cut to Size of Plates & Structurals(Including Taper cutting) |
| 123 | Saw tooth Expansion Joint |
| 124 | Seal Box |
| 125 | Sealbox inserts |
| 126 | Seal Box with Pipe Rolled out of SS Sheet |
| 127 | Shearing (H) |
| 128 | Small GF jobs weight upto 10 kg |
| 129 | Small GF jobs weight 10 kg to 50 kg |
| 130 | Vertical Ladder (Painted) |
| 131 | SOFA/BOFA compartment assy |
| 132 | Soot Blower Piping Supports |
| 133 | SS bellow including round corner fabrication |
| 134 | SS FIXING PIN |
| 135 | SS Retainer |
| 136 | SS small Despatchable units |
| 137 | Stairs & Ladders |
| 138 | STRAIGHT & BEND RODS WITH THREADING |
| 139 | Strips,Plates,Stiffners,Lug, involving Shearing, Punching and Pressing |
| 140 | Tapping Points |
| 141 | Tension Bar & Related items in PGMA |
| 142 | Tension Roll Assembly |
| 143 | TG Embedment Lugs of all variants |
| 144 | THREADED CLEVIS M20 RH |
| 145 | THREADED CLEVIS M27 |
| 146 | THREADED CLEVIS M27(LH) |
| 147 | THREADED CLEVIS M36X3 |
| 148 | THREADED CLEVIS M36X3(LH) |
| 149 | THREADED CLEVIS M45X3 |
| 150 | THREADED CLEVIS M45X3(LH) |
| 151 | Transition Chute and Feed pipe |
| 152 | TT Burner 660 and above |
| 153 | TT BURNER ATTACHMENTS |
| 154 | Tubular Reach Rod,CC Link Plate |
| 155 | Turbo Separator |
| 156 | U shield ( straight )more than 1 mtr long |
| 157 | U shield (straight) 500 TO 1000 mm |
| 158 | U shield (straight) upto & including 500mm long. |
| 159 | U shield bend type more than 1 mtr long |
| 160 | U-RODupto & including 12 mm dia-with threading |
| 161 | U-RODupto & including 12 mm dia-without threading |
| 162 | U-ROD 25mm to 50 mm dia-with threading |
| 163 | U-ROD 25mm to 50 mm dia-withoutthreading |
| 164 | U-ROD above 12 mm and upto & including 24 mm dia-with threading |
| 165 | U-ROD above 12 mm and upto & including 24 mm dia-without threading |
| 166 | VANED DIFFUSER |
| 167 | WASHER PLATE (SS) |
| 168 | Washer up toand including 10mm ( CS/AS and Cu) |
| 169 | WEAR SLEEVE (including Hard Chrome Plating) |
| 170 | Coal Compartment Assembly without divider plate With Modified tip |
| 171 | Mechanical Spacer Bar-SS |
| 172 | Cassette baffle (SS with cover plate) |
