Tender For Annual Plan-Annual Plan -Kanjiramkulam Gp Proj No 119/25 Maintenance Of Anganwadi No -47 In Ward 12Mgnr 50000/--Proj No 119/25-General Civil Work
Tender Value
42338
Estimated cost
Bid Submission
28 Dec 2024
0 days left
EMD
1058
Bank guarantee accepted
Document Fee
335
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kanjiramkulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Annual Plan-Annual Plan -Kanjiramkulam Gp Proj No 119/25 Maintenance Of Anganwadi No -47 In Ward 12Mgnr 50000/--Proj No 119/25-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | MAINTENANCE OF ANGANWADI NO -47 |
| 2 | OD286042/2024-2025:Supplying & fixing information board 75*60 cm size using G.I pipeaspost& 1mm MS sheet surrounded by MS angles including painting ,lettering,& fixing in concreteetc complete. |
| 3 | 50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete |
| 4 | 13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). |
| 5 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 6 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 7 | 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 8 | 15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet |
| 9 | OD269756/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitchofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), totalcoatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steelgrade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoidscratchesduring transportation and should be supplied in single length upto 12 metre oras desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/selftapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch inhorizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trussesand including cutting tosize and shape wherever required. |
| 10 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 11 | OD316006/2024-2025:Electrification work including materials and labour chargeas per bill and voucher |
AI Tender Summary
Tender Timeline
Dec 20, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedDec 28, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 31, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender