|
| 1 | Sub Work- No.1 :- Pure Water Rising main from RCC Supply Well @ Gut No 264 toRCC ESR ( HDPE 200 mm dia 6 Kg ) L = 2375.0 mExcavation for foundation or pipe trenches in earth soils of all types, sand gravel and soft murum including removing the excavated material upto a distance of 50 m and lifts as below, stacking and spreading as directed, normal dewatering, Preparing the bed for foundation and excluding backfilling etc. complete.Lift 0 to 1.5 m |
| 2 | Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc.complete.(Bd-A-3/259)Lift 0 to 1.5 m |
| 3 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.Lift 0 to 1.5 m |
| 4 | Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means.Lift 0 to 1.5 m |
| 5 | Filling in plinth ad floors murum beddig in trenches with approved murum from excavated materials from foundation 15 cm. to 20 cm. layers including watering ad compaction complete. |
| 6 | Providing and supplying in standard lengthsPolyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint /quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc.complete.Note:- H.D.P.E. Pipes shall be as per200mm dia HDPE Pipe6Kg/Cm2 |
| 7 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges,transportation up to store, transit insurance,loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete. 200mm diaCouplers 200 |
| 8 | Equal Tee |
| 9 | Elbow 90Deg. |
| 10 | Elbow 45 Deg. |
| 11 | Electrofusion Reducing Tee200x200x90 |
| 12 | LNPE 200 |
| 13 | Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight,Unloading from railway wagon, Loading into Truck, Transportation to departmental store,unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition/ revision with amendments for Rubber Gaskets.(IS:8329-2000 Latest Version) D.I.K-7 D.I.K-9i) 200mm dia D IK-9 Pipe |
| 14 | Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.200mm dia C I D/F sluice valve PN 1 |
| 15 | 80mm dia C I D/F sluice valve PN 1 |
| 16 | Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984)200mm dia C I D/F Refluxvalve PN 1 |
| 17 | Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications ofapproved make and quality of following diameters including railway freight, inspection charges,unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete.50 mm dia double ball air valves PN 1 |
| 18 | Providing and supplying C.I. D/F angle type spring loaded pressure relief valves of approved make and quality including inspection charges, transportation to departmental stores excluding GST levied by GOI & GOM in all respect etc. complete.100mm dia C IPR valve |
| 19 | Providing ISI standard R.C.C. pipes in standard lengths f following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev- ied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988.450 mm diaRCC NP III Class pipe |
| 20 | Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634200mm dia HDPE Pipe6Kg/Cm2 |
| 21 | Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc.complete200mm dia D IK-9 Pipe |
| 22 | Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, etc. complete as directed by Engineer- in-charge (For all class of pipes.) as per IS- 783-1985.450 mm diaRCC NP III Class pipe |
| 23 | Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) 200mm dia C I D/F sluice valve& Reflux Valve |
| 24 | 80mm dia C I D/F sluice valve |
| 25 | Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).50 mm dia double ball air valves PN 1 |
| 26 | Lowering, laying and fixing in proper alignment and position all types of C.I. D/F angle type spring loaded pressure relief valves including cost of all material, labour, cost of conveyance from stores to site of work and giving satisfactory hydraulic testing, etc. complete. (For all class of valves.)100mm dia C IPR valve |
| 27 | Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores /site,and stacking,etc.complete.M S D/F Specials |
| 28 | Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc.D ISpecials |
| 29 | Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer-incharge for following diameters of pipe linesa) Foundation on Murum and HarderStrata. |
| 30 | Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. PCC M-150 |
| 31 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
