Tender For Acoustical Treatment And Arch. Works
Tender Value
3.40 Crore
Estimated cost
Bid Submission
03 Jan 2025
0 days left
EMD
6.80 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
hyderabad → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Acoustical Treatment And Arch. Works Acoustical Treatment And Other Architectural Works For Training Halls, Conference Halls And Other Facilities In Nfc, Hyderabad. => Limited
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Dec-2024 | Corrigendum BOQ | Financial Bid | 03-Jan-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | Providing & fixing 600mmX600mm glazed vitrified tiles/double charge vitrified tiles of polished/matte finish conforming to IS 15622 for flooring, skirting, dado etc. (thickness as specified by manufacturer) of make Johnson, Somani, Kazaria of required shade, design, colour and pattern laidusing high polymer modified quick-set tile adhesives (Water based) for floors conforming to IS: 15477 of Roff/MYK or approvedmake, hacking the existing surface for recieving the tiles, close jointed and pointed with matching epoxy grout of required colour as required. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 2 | Providing and fixing 16mm to 18mm thick gang saw cut, mirror polished/honed finish, machine cutgranitefor floors, window sills, jambs, soffits, facias, staircase and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 Coarse sand) or using chemical adhesive, jointed with epoxy grout of matching pigment, including rubbing, moulding, polishing, forming nosing at edges, making of 3 no of grooves for staircase threads wherever required. complete as specified and directed |
| 3 | Supplying & Fixing of frame, shelves and vertical partitions,Shutters etc forcupboards with 19mm/12mm thick Green Ply/Century Marine Grade Plywood conforming to IS 710 overlaid with 0.8 mm thick white laminate of make Greenlam with Back side of cupboard with 12mm thick plyboard conforming to IS 710 overlaid with 0.8 mm thick white laminate of make Greenlam on one side (inner side of cupboard) and 4mm thick ACP of make Alstone, Eurobond or approved equivalent on other side fitted with necessary hardware and all exposed edges are covered with 2mm thick PVC tape using EVA hot melt glue at 200 degree C on the imported through feed edge banding machine or fixed at site using edge trimming machine using pidilite probond or equivalent etc. complete as specified and directed.Shutters:- Supply & Fxing of shutters, made out of 19mm thick Green Ply/Century Marine Grade Plywood conforming to IS 710 overlaid with 1mm thick colour laminate make Greenlam (GLOSSY) or equivalent on exposed sides and 0.8mm thick white laminate on other side and all exposed edges are covered with 2mm thick PVC tape using EVA hot melt glue at 200 degree C on the imported through feed edge banding machine or fixed at site using edge trimming machine using pidilite probond or equivalent including all hardware of Hettich Make viz. steel, nickel plated hinges with hinge cover 5 Nos. in single unit (Hettich Sensys 8645i/ONSYS4447i or equivalent) /Hettich Telescopic Channels for sliding shutter as per Manufacture Specification or equivalent , locks 2 Nos. with keys (Hettich Item Code 9136128 S/43635 or equivalent, SSHandles 4 Nos./2 Sets (Hettich Item Code 1170158/1180167/1180166), magnetic catcher , tower bolt etc. complete as specified and directed Drawers :-Supplying & Fixing of drawers with 12/9mm thick Green Ply/Century Marine Grade Plywood conforming to IS 710 overlaid with 0.8 mm thick white laminate make Greenlam or equivalent on both sides fitted with necessary hardware and all exposed edges are covered with 2mm thick PVC tape using EVA hot melt glue at 200 degree C on the imported through feed edge banding machine or fixed at site using edge trimming machine using pidilite probond or equivalent including all hardware of Hettich Make viz. Telescopic channels (1 set) , lock (1 No.) with keys , ( Hettich Item Code 43635 or equivalent ), handle (1 No.) ( Hettich Make or equivalnet)etc. complete as specified and directed.Shelves/Frames/Vertical Partitions/Boxes :-Supplying & Fixing of frame, shelves and vertical partitions to cupboards with 19mm thickconforming to IS 710 overlaid with 0.8 mm thick white laminate make Greenlam or equivalent on both sides fitted with necessary hardware and all exposed edges are covered with 2mm thick PVC tape using EVA hot melt glue at 200 degree C on the imported through feed edge banding machine or fixed at site using edge trimming machine using pidilite probond or equivalent including all hardware of Hettich Make etc. complete as specified and directed.All other hardware and screws complete as specified and directed by EIC or as per site requirement is to be provided without any extra cost.Note :- (i) Only front elevational area (LXH) of the cupboard will be measured for payment.(ii) Removing of existing cupboards wherever required shall be considered in the scope of this work andcarried out at no extra cost. (iii) Any civil work involved in fixing of the cupboards to the wall shall be considered in the scope of this work and shall be carried at no extra cost.(iv) The ply used shall be of minimum 25 years warranty |
| 4 | Supplying & Fixing of frame, shelves and vertical partitions,Shutters etc forfile cabinet with 19mm/12mm thick Green Ply/Century Marine Grade Plywood conforming to IS 710 overlaid with 0.8 mm thick white laminate of make Greenlam with Back side of cupboard with 12mm thick plyboard conforming to IS 710 overlaid with 0.8 mm thick white laminate of make Greenlam on one side (inner side of cupboard) and 4mm thick ACP of make Alstone, Eurobond or approved equivalent on other side fitted with necessary hardware and all exposed edges are covered with 2mm thick PVC tape using EVA hot melt glue at 200 degree C on the imported through feed edge banding machine or fixed at site using edge trimming machine using pidilite probond or equivalent etc. complete as specified and directed.Shutters:- Supply & Fxing of openable/sliding shutters made out of 1) 19mm thick Green Ply/Century Marine Grade Plywood conforming to IS 710 oevrlaid with 1mm thick colour laminate make Greenlam (GLOSSY) or equivalent on exposed sides and 0.8mm thick white laminate on other side and all exposed edges are covered with 2mm thick PVC tape using EVA hot melt glue at 200 degree C on the imported through feed edge banding machine or fixed at site using edge trimming machine using pidilite probond or equivalent including all hardware of Hettich Make viz. steel, nickel plated hinges with hinge cover 3 Nos. in single unit (Hettich Sensys 8645i/ONSYS4447i or equivalent) /Hettich Telescopic Channels for sliding shutter as per Manufacture Specification or equivalent , locks 2 Nos. with keys (Hettich Item Code 9136128 S/43635 or equivalent, SSHandles 4 Nos./2 Sets (Hettich Item Code 1170158/1180167/1180166) , magnetic catcher , tower bolt etc. complete as specified and directed 2) 6mm thick toughened glass with smooth edges with sliding track/hinges/edge beading or any other hardware, fittings and fixture of hettich or approved equivalent as required, complete as directed and specified.Drawers :-Supplying & Fixing of drawers with 12/9mm thick Green Ply/Century Marine Grade Plywood conforming to IS 710 overlaid with 0.8 mm thick white laminate make Greenlam or equivalent on both sides fitted with necessary hardware and all exposed edges are covered with 2mm thick PVC tape using EVA hot melt glue at 200 degree C on the imported through feed edge banding machine or fixed at site using edge trimming machine using pidilite probond or equivalent including all hardware of Hettich Make viz. Telescopic channels (1 set) , lock (1 No.) with keys , ( Hettich Item Code 43635 or equivalent ), handle (1 No.) ( Hettich Make or equivalnet)etc. complete as specified and directed.Shelves/Frames/Vertical Partitions/Boxes :-Supplying & Fixing of frame, shelves and vertical partitions to cupboards with 19mm thickconforming to IS 710 overlaid with 0.8 mm thick white laminate make Greenlam or equivalent on both sides fitted with necessary hardware and all exposed edges are covered with 2mm thick PVC tape using EVA hot melt glue at 200 degree C on the imported through feed edge banding machine or fixed at site using edge trimming machine using pidilite probond or equivalent including all hardware of Hettich Make etc. complete as specified and directed.All other hardware and screws complete as specified and directed by EIC or as per site requirement is to be provided without any extra cost.Note :- (i) Only front elevational area (LXH) of the cupboard will be measured for payment.(ii) Removing of existing cupboards wherever required shall be considered in the scope of this work andcarried out at no extra cost. (iii) Any civil work involved in fixing of the cupboards to the wall shall be considered in the scope of this work and shall be carried at no extra cost.(iv) The ply used shall be of minimum 25 years warranty |
| 5 | Veneer panelling/Door frame with 12mm ply with wooden framework -Providing and fixing in properline and level,12mm thick Water proof plywood of approved make BWP conforming to IS 710, 100% Gurjan/Century/Artees/Login with veneer finish of 4mm thick of Natural veneer/ flaming / Royal club/ greenlam conforming to sample shade approvedwith approved shade of polish & finished in approved melamine , fixing panel to existing wall by means of approved wooden screws/ nails with inside Sound Proof Acostical material panel glass wool of 25mm thick and wooden frameworkof size 600mm X 600mm , made out of 18/12mm thick commercial ply of BWP grade conforming to BIS 710 of100% Gurjan/Century/Artees/Login make cutting the ply and fixing with nails/ metallic wooden screwsin line , plumb and level The edges should have matching wood beading finished in approved melamine including applying one coat of fire retardant paint complete as specified and directed.Note :- 1) Making rebate for door frames shall be done in the panneling and no extra payment will be made for the same.2) The ply used shall be of minimum 25 years warranty. |
| 6 | Providing and fixing in position double/single leaf flush door shuttersas per below specifications Door shutter made of solid block board core, 35 mm thick at all heights above plinth level internally lipped with second class teakwood, 25 mm deep along all edges of shutters bounded with water-proof type phenol formaldehyde synthetic resin, hot pressed, Chemicaly treated andwith commercial ply finish on both faces providing and fixing under pressure with approved type adhesive including providing and fixing 2nd class teak wood rebate at meeting junction of shutters in case of double door shutters, including providing teakwwod veener not less than 0.5mm on both sides and with three coats of melamine polish of approved tint & shade over French polish including preparing the surface to get the desired finishcomplete as specified and directed.Note :- The Door shall be made as per attached drawing/picture as per tender or as directed. |
| 7 | Providing & fixing stainless steel tower bolts of min size 200 X10mm size with necessary screws complete as specified and directed . |
| 8 | Providing & fixing stainless steel door Handles of minimum hole to hole distance of 250 mm and dia min 20 mm complete as specified and directed . |
| 9 | Providing and fixing Heavy quality Stainless Steel butt hinges of size 125mmX75X4mm with necessary screws etc complete |
| 10 | Providing and fixing mortise door lock for wooden doors double/single complete as specified and directed . |
| 11 | Providing and fixing hanging floor Door stopper with necessary screws etc. complete as specified and directed. |
| 12 | Providing and fixing aluminum die cast body tubular type universal hydraulic door closer of HYPER/Godrej make confirming to IS 3564 for wooden doors weighing upto 65kg with necessary accessories, fixtures, fittings, scews etc |
| 13 | GLASS PARTITION :-Providing and fixingglass partition with 12mm Thk SAINT GOBAIN/MODI GUARD clear Toughenglasswith 3 M frosted glass film of approved make, supported at top WITH ozone Brand L Connector Fixing on 18mm thk 710 Bwp Ply Framing Fixing From Slaband Bottom AluminiumALUMNIUM U Track WithPatch Fittings and connectors with the manufacturer\"s specifications. Cost to be inclusive of joints between glasses to be filled with clear sealant etc. complete as specified and directed by EIC. |
| 14 | GLASS DOOR :- Supplying and fixing frameless 12MM thick clear toughened glassSAINT GOBAIN/MODI GUARDwith 3 M frosted glass film , door with SS handles, spring, locking, arrangements with SS patch fitting(approved make) etc. complete. All SS member to be in Satin/hairline/mirror finish as per EIC/Architect\"s choice complete as specified and directed by EIC. |
| 15 | FLOOR SPRINGS :- Providing & fixing Ozone Stainless Steel Double Cylinder Floor Spring Glass Package Set (Silver) or equiavlent tested to 5,00,000 cycles, as per : EN 1154, including making chases in floor and making good the same, complete as specified and directed by EIC. |
| 16 | Providing 1 mm thick cement based putty of Asian / J K /Birla or approved make in two coat at walls, ceilings etc at all heights including scaffolding, cleaning of surface, surface preparation, sand papering, removal of loose paint, making necessary repairs to scratches, filling in holes, filling of cracks with asian paints smart care crack seal or approved equivalanet, providing one coat of primer for receiving the putty the second coat of puttyshould be rubbed thoroughly by sand paper up to required finish even surface and smooth as directed |
| 17 | INTERNAL PAINTING :- Applying 3 or more coats of interior premium emulsion paint of Asain Apcolite suprema /Dulux interior acrylic premium emulsion of required shadeof interior grade, having VOC content less than 50 grams/liters including one coat of approved suitable interior primer at all heights above plinth level inside rooms etc., including cleaning the surface, surface preparation, rubbing with sand paper, filling of holes with putty, filling of cracks with asian paints smart care crack seal or approved equivalent, complete and as directed. |
| 18 | Providing and applying textured finished stucco of Asian (Royale Play Stucco)/Dulux/Berger or approved equivalent make by applying one coat of pimer, three coats of of Asian Royale Play Stucco or approved equivalent, creating the required pattern in the desired color, including surface preparation, cleaning the surface and filling of any holes using putty, filling of cracks with asian paints smart care crack seal or approved equivalant, all material, tools, sand paper, brush, roller, trowel, scrapper, putty knife, spraying machine etc., at all heights, complete as per manufacturer\"s specifications and as directed by EIC. |
| 19 | Surface Preparation: Removing/chipping and cleaning the loose plasters, clean the surfaces, make the brick pointing with 1:3 Cement mortar admixed with Fosroc Conplast WL Xtra or approved equivalent @ dosage of 200ml / bag of cement, re plaster the entire surface with 1:4 Cement mortar admixed withFosrocConplast WL Xtra or approved equivalent @ dosage of 200ml / bag of cement.Crack Treatment: All cracks shall be treated with single component, non shrink, cementitious crack filler of Fosroc Renderoc CF / CS or approved equivalent. The cracks to be sealed shall be saw cut or chiselled to form a ‘V’ groove of approximately of 6mm x 6mm.The grooves shall be cleaned to remove all the loose particles, dust, by an air blower or wire brushing. The groove shall be sprinkled with clean water before applying the sealing mortar.For any pin holes, it shall be treated with Renderoc FC or approved equivalent.Protective Coating for Internal Walls: Supply and application of Two-component, high performance acrylic polymer modified cementitious brush applied Nitoproof Damp Protect applied at average minimum DFT of 1.0 mm in 2 coats using a short stiff brush preferably 120 - 150mm width at an approximate coverage of 15 to 16 sq.ft /kg /coat. It shall possess the following properties: 1. Application temp. 10 - 35°C2. Mixed Density: 1.7g/cc(Brushable consistency)3. Adhesion to Concrete: >0.8 MPa4. Crack Bridging ASTM C1305: Up to 1.2mm5. Elongation ASTM D-412: 100%6. Rapid chloride permeability Resistance ASTM C1202: Very Low |
| 20 | Removing existing paint by scraping, sand papering, scrubbing machine and prpearing the surface smooth including necessary repairs to scratches etc, complete as directed. |
| 21 | Making chases in walls upto 75mmX75mm including making good and finishing with matching surface using cement plaster and chicken mesh after placing of pipe. |
| 22 | Supply and installation of 2mm thick FRLS 25mm dia PVC conduits conforming to IS with required bends/junctions of M/s Sudhakar/AKG industries make in the wall by clamping on the wall with required hardware |
| 23 | Providing and fixing roller blinds of approved make as per the manufacturer\"s specifications with drive unit, end plug, support brackets, roller tube, bottom rail, ball chains. Drive unit to be of moulded plastic with straight rectangular support pin and inserted into the tube end. It shall be driven by a ball chain pulley and can be positioned at right or left side of the shade. The shade when lowering or raising shall automatically be lockable upon release of the ball chain by the means of friction lock. End plug shall be moulded by plastic locking pin. The plug shall be inserted into the tube end. Support brackets shall be of zinc plated steel and provided with moulded plastic cover and used in right and left hand position differentiated by the acceptance of the rectamgular drive unit support or the round idler plugin Roller tube shall be made out of roll formed steel with outer diameter 25mm. It should be suitably protected against corrosion, keyway integral with the tube to accomodate the spline. Note: Only size of opening for windows shall be measured for payment. |
| 24 | PANELING WORK:- Supplying and fixing of 12mm thk Ply Panelling with 18mm Thk wooden framework -Providing and fixing in properline and level,12mm thick Water proof plywood of approved make BWP conforming to IS 710, 100% Gurjan Brand Royal Club/Gurjan club/Green Ply or Equalent etc. with Laminate finish of 1mm thick Brand GreenLam/Merino /Century or Equalent ,Approved with approved shade ,fixing panel to existing wall by means of approved wooden screws/ nails with inside Sound Proof Acostical Insuleted Rock Wool Panel of 50mm thick and wooden framework of size 600mm X 600mm , made out of 18/12mm thick ply of BWP grade conforming to BIS 710 of 100% Gurjan Brand Royal Club/Gurjan club etc .make cutting the ply and fixing with nails/ metallic wooden screws in line, complete as directed and specified.Note: The ply used shall be of minimum 25 years warranty. |
| 25 | Providing and Fixing Light weight Calcium Silicate False Ceiling with Silhouette Grid at all heights of Aerolite make with 15mm thick integral densified micro edge light weight calcium silicate tiles of size 595X595mm ofapproved design, texture and pattern having 100% RH – HUMIDITY RESISTANCE, non-combustible as per BS 476, Noise Reduction Coefficient of 0.5, Light reflectance above 85%, Thermal Conductivity less than 0.05 W/m K, to be laid in true horizontal level suspended on interlocking metal powder coated T-grid of hot dipped galvanized steel sections of 0.4mm thick Silhouette Profile, rotary stitched double webbed white with 6mm reveal profile comprising of main ‘T’ runners of size 15X42mm of length 3000mm, cross-T of size 15X42mm of length 1200mm and secondary intermediate cross-T of size 15X42mm of length 600mm to form grid module of size 600X600 mm , wall angle of size 22x19x0.4mm to be fixed all around the wall. Main ‘T’ runners to be suspended from the ceiling using GI slotted cleats fixed to ceiling with 50mm long8 mm outer dia M-6 dash/anchor fasteners, 6mm dia fully threaded GI hanger rod with L-shape level adjuster of size 85X25x2mm or 4mm GI hanger rod with butterfly clip, including scaffolding, at all heights, complete as per specifications and as directed by Engineer-In-charge. Note:Hanger system shall be decided as per site conditions and height of false ceiling as directed by Engineer-in-charge. |
| 26 | Providing paneling with Premium Quality WPC Louvers/Rafters offer a modern & luxurious look for Wall Cladding & Ceiling Paneling using ready to install FLEX PVC of minimum thickness 26mm, including fixing hardware, edge trim, corner trim, infill golden or other required color SS/Aluminium strip as per design, complete as specified and directed. |
| 27 | Providing Gypsum board false ceiling of desired design, and finish consisting of :i. \"Gypsteel ULTRA\" or approved equivalent false ceiling frame system including CRP surface ribbed components such as ceiling sections (0.5mm thick, 80mm wide, @ maximum 457mm c/c, fixed to intermediate channels with connecting clip), Intermediate channels (0.9mm thick, 45mm wide, @ maximum 1220mm c/c, suspended from the soffit with ceiling angles (25x10x 0.55mm @ 900mm c/c maximum, GI cleat and steel fasteners), perimeter channels (0.5mm thick, 27mm wide, screw fixed to wall/partition at 610mm c/c), including all fasteners, angles, connectors, clips etc. all completeii. Single layer of 12.5mm tapered edge plain gypsum board conforming to IS 2095 screw fixed to ceiling sections with 25mm drywall screws @ 230mm c/c. Including jointing and finishing the boards for flush surface including filling and finishing with approved (as/ Manufacturer\"s recommendation) jointing compound, paper tape, finishing gap between wall and ceiling withPOP, wire mesh , two coats of drywall top coat, providing necessary cut outs and finishing for electrical/ AC/ Other fittings, fixtures, providing vertical ceiling boards, necessary additional framing components for cutouts/ vertical surface etc, all complete for all heights.Note : Actual surface area (including vertical ceiling board area if any between false ceilings at various levels, excluding areas for cut-outs, openings etc.) of false ceiling shall be measured for payment. |
| 28 | Providing PVC false ceiling of desired design, and finish consisting of :i. false ceiling frame system including CRP surface ribbed components such as ceiling sections (0.5mm thick, 80mm wide, @ maximum 457mm c/c, fixed to intermediate channels with connecting clip), Intermediate channels (0.9mm thick, 45mm wide, @ maximum 1220mm c/c, suspended from the soffit with ceiling angles (25x10x 0.55mm @ 900mm c/c maximum, GI cleat and steel fasteners), perimeter channels (0.5mm thick, 27mm wide, screw fixed to wall/partition at 610mm c/c), including all fasteners, angles, connectors, clips etc. all completeii. PVC planks of required color and texture of minimum thickness 7mm consisting of minimum 40% PVC which is further hot stamped to give aesthetic and designer look, fixed to ceiling sections with 25mm drywall screws @ 230mm c/c. Including jointing and finishing the boards for flush surface including filling and finishing with approved (as/ Manufacturer\"s recommendation) jointing compound, paper tape, finishing gap between wall and ceiling with POP, wire mesh , two coats of drywall top coat, providing necessary cut outs and finishing for electrical/ AC/ Other fittings, fixtures, providing vertical ceiling boards, necessary additional framing components for cutouts/ vertical surface, edge beading, corner beading, golden or any other color SS/Aluminium strip, etc, all complete for all heights.Note : Actual surface area (including vertical ceiling PVC plank area if any between false ceilings at various levels, excluding areas for cut-outs, openings etc.) of false ceiling shall be measured for payment. |
| 29 | Supplying and fixing of PVC sheet of 3mm thickness of required texture and color, including cutting and fixing the sheet to wall usingchemical adhesive, screws, bolts etc, golden or any other color SS/Aluminium strip, complete as directed. |
| 30 | Laminated Wooden Flooring :- Providing &Fixing of Wooden Laminated flooring including skirting with12mm thk Plank size 193 x 1214mm of approved brand Action tesa/Solutia/karnav etc Stain resistence ,Impact Resistence Slip Resistence Impact Sound Resulation specified and directed. |
| 31 | Supplying and Installation of Acoustical Wall Panels Using with 18mm Thk wooden framework -Providing and fixing in properline and level,with BWP conforming to IS 710, 100% Gurjan Brand Royal Club/Gurjan club/Green Ply. with Fill of 500Gsm (25mm Thk) Polywool 20mm Wood Wool Boards of 2X4 SIZE AND INSTALLING 12MM UPVC Gripper system and infilling 12mm foam finished with 2 single single colour fabric pattern finish wih Alternate individual panels |
| 32 | Providing & fixing execuive desk(200X1800X760mm) finished in walnut & solid grey laminate with side cabinet that includes a drawer with lock, two swivel doors and CPU space inlcudes aliminium alloy wirebox for wire manegement complete as specified and directed |
| 33 | Providing & fixing meeting table (6000X1680X750) in sapele laminate with solid laminate clad base and modesty panel includes inbuilt wire manegment with two wire boxes on desktop having power, VGA & data sockets complete as specified and directed |
| 34 | Providing & fixing meeting table (3500X1580X750) in sapele laminate with solid laminate clad base and modesty panel includes inbuilt wire management with two wire boxes on desktop having power, VGA & data sockets complete as specified and directed |
| 35 | Providing, fixing, manufacturing, assembling of wall cladding, wooden paneling, chairs, side table, manager table, computer table, modular kitchen rack, wash basin counter etc. including adhesives. SS screw, SS channel, locking arrangement, labour, scaffolding, wastage etc all as per approved drawing and as directed by EIC using following materials:-1) Cladding/paneling/Furniture shop drawing shall be submitted by the agency and got approved by EIC before start of manufacturing works.2) The rates shall including all the required material like nails, SS screw, Wooden nails, Adhesive glue, all required heavy quality fixtures and fittings etcand labour , scaffolding etc. |
| 36 | 19 mm Marine Ply wood of Kit ply/Century/Green ply etc. (Warranty 25 year). |
| 37 | 12 mm Marine plywood of Kit ply/Century/ Green Ply etc .(Warranty 25 year). |
| 38 | 8 mm Marine Plywood of Kit ply/Century/ Green Ply etc. (Warranty 25 year). |
| 39 | 2 mm thick PVC moulding. |
| 40 | 0.8 mm PVC moulding. |
| 41 | 3 mm thick Superior grade Veneer of Century/Greenlam etc. |
| 42 | 1 mm Approved Premium Quality (High Glossy)Laminate in required pattern and shape of formica/greenlam/Merino etc |
| 43 | 0.8 mm thick balancing laminate of formica/greenlam/Merinoetc. |
| 44 | French Spirit Polishing-two or more coats including a coat of wood filler, including surface preparation, all material, tools, machinery etc., complete as per manufacturer\"s specifications and asdirected by EIC. |
| 45 | Providing high gloss/matt finish melamine clear polish using spraying machine on wood works in required color/wooden shade texture in two or more coats of Asian/Berger/Dulux/Nerolac or approved make, rubbing with sand paper/emery cloth, applying sealer/filler coat if required as per manufacturer\" specifications, including all material, tools, machine etc, complete as directed by EIC. |
| 46 | Crank Hinges of size 25mm ofHettich make (onsys 4447i Hinge) or approved equivalent |
| 47 | Wooden Drawers Telescopic runner (load capacity up to 40 Kg) of size 10\" to 16\" of Hettich make or approved equivalent |
| 48 | Wooden Drawers Telescopic runner (load capacity up to 40 Kg) of size 18\" to 24\" of Hettich make or approved equivalent |
| 49 | Multipurpose locks for drawer-25mm (MS powder coated) of hettich, kich make or approved equivalent |
| 50 | Magnetic door catcher |
| 51 | Brass coated 4” Door handle |
| 52 | Brass coated 6” Door handle |
| 53 | Providing and fixing factory made uPVC white colour sliding cum fixed glazed windows of make Deltra/Aparna/Greentech comprising of uPVC multi-chambered frame three track three panels sliding window made of frame 115 (and above)x 45 (and above) mm & sash 44 (and above) x 55 (and above) mm both having wall thickness of 2.3 ± 0.2 mm, duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), including providing and fixing single glazing made of 6mm thick toughened glass, uPVC extruded glazing beads of appropriate dimension, EPDM gasket, fly proof SS wire mesh in one of the track, necessary locking arrangement, nylon rollers, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. |
| 54 | Brick work as per IS 2212 using fly ashbricks conforming to IS 12894 of Class Designation 7.5 and above at all height/depthwith cement mortar 1:6{1 cement(M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.): 6 crushed coarse Sand (conforming to IS 2116)} including raking out joints, curing, scaffolding etc., complete as specified and directed. |
| 55 | Providing 15mm thick Ready Mixed Plaster (RMP) of approved make for internal / external faces of brickwork/ concrete/ RRM Wall, cable pits, trenches, chambers, steps etc. surfaces for all walls and beams flush with walls, mullions etc. including preparation of the surface even and smooth to correctline, level, plain & plumb including one coat of cement paste for smooth surface for water flow, rounding if necessary at all lead and locations on slope, plain & curved surfaces, curing, cleaning, scaffolding, complete all as per specifications and as directed at site by theEngineer-in-Charge.The mortar used shall be using factory manufactured pre mix/ready mix of\"Readiplast\" of M/s Ultratech Cement Ltd / Silicoplast / or other approved equivalent make,using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties,mechnical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer. |
| 56 | a) 12-15mm in single coat |
| 57 | b) 20mm in two coats |
| 58 | Dismantling the existing mosaic/ceramic tiles, shahabad stone, PVC flooring etc., in flooring / dado including dismantling, bedding mortar and disposing the debris within anywhere in NFC for all leadsas directed by Engineer-in-Charge. |
| 59 | Shifting of furniture from rooms and placing it outside for the civil works to commence and again putting the furniture back into the rooom after the completion of work as per the directions of Engineer-in-charge.Note: Payment will be made per room basis. |
| 60 | Removing the existing Aluminium/MS/Wooden/UPVC/PVC or any other matrial false ceiling, false flooring of all types, carefully removing of false roofing/flooring sheets, planks, suspenders, cleats, existing light fittings, cables, etc., if any., with all necessary scaffolding and stacking properly at a distance within anywhere in NFC for all leads as directed by the Engineer-in-charge |
| 61 | Dismantling existing wooden/Aluminum/ / M.S/PVC (or other material) doors, windows, ventilators etc., including shutters, frames, holdfasts etc very carefully without damaging the frame and shutter etc., disposing the unserviceable materials within anywhere in NFC for all leads, making good the damaged surface of opening after removal of door/window/ventilators etc, as directed by Engineer-in-Charge. |
| 62 | Dismantling old plaster, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within anywhere in NFC for all leads |
| 63 | Rebate for Taking away dismantledMS/Wooden/Aluminium/PlasticWindows/Doors/false ceiling/false flooring along with glass, door/window frames (Opening Size will be measured for payment) by the contractor |
| 64 | Providing 3-D design (Elevations) for the buildings using3ds Max software of Autodesk including making 3 D model of the structure using plan & section using Autocad drawings provided by the dept.The bidder shall be responsible for conceptulization of the elevation of the buildings, rendering and modelling of3D elevation drawings. The bidder shall provide minimum three options for each building . They should also provide the detailed material specification along with detailed estimaion to be used for providing architectural finishes to match the elevation. The drawings need to be submitted in soft copy and 3 Nos. of A3 size hard copies. Note :- 1) Only elevation area of the building will be considered for payment.2) Service provider for 3-D design shall be got approved by the department before commencement of work. |
| 65 | Providing 3-D design (3d view,Plans and sections) for the building interiors using3ds Max software of Autodesk including making 3 D model using plan & sections given inAutocad drawings provided by the dept.The bidder shall be responsible for conceptulization , rendering and modelling of3D view drawings. The bidder shall provide minimum three options for each Building . They should also provide the detailed material specificationalong with detailed estimaion to be used for providing architectural finishes to match the 3D view. The drawings need to be submitted in soft copy and 3 Nos. of A3 size hard copies. Note :-1) Only plan areawill be considered for payment2) Service provider for 3-D design shall be got approved by the department before commencement of work. |
| 66 | Providing 3-D concept for external developemnt around the buildings/parks/sit outs/pathways/gardening/statues etc using3ds Max software of Autodesk including making 3 D model .The bidder shall be responsible for conceptulization , rendering and modelling of3D concept drawings. The bidder shall provide minimum three options for each project . They should also provide the detailed material specificationalong with detailed estimaion to be used for providing architectural finishes to match the 3D view. The drawings need to be submitted in soft copy and 3 Nos. of A3 size hard copies. Note :- 1) Only plan areawill be considered for payment.2) Service provider for 3-D design shall be got approved by the department before commencement of work. |
| 67 | Providing 3-D design (Painting Pattern) for the existing buildings using3ds Max software of Autodesk including making 3 D model of the structure using photographs, plan & section using Autocad drawings provided by the dept.The bidder shall be responsible for conceptulization of the elevation of the buildings, rendering and modelling of3D elevation drawings. The bidder shall provide minimum three options for each building . They should also provide the detailed material specificationalong with detailed estimaion to be used for providing architectural finishes to match the elevation. The drawings need to be submitted in soft copy and 3 Nos. of A3 size hard copies. Note :- 1) Only elevation area of the building will be considered for payment2) Service provider for 3-D design shall be got approved by the department before commencement of work. |
AI Tender Summary
Tender Timeline
Dec 26, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 03, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 03, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 04, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender