|
| 1 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. |
| 2 | Construction of granular sub-base by providing close graded material, spreading in uniform layerswithmotorgrader/Paveronpreparedsurface,mixing bymixinplace methodwith rotavatoratOMC,andcompactingwithvibratoryrollertoachievethedesireddensity, complete as per clause 401 -- By Mix in Place Method and Grading - IMaterial |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial SandBd. E. 1 Page No. 287 BDE 1 |
| 4 | Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete. |
| 5 | Providing and laying insitu/readymix M-20 cementconcrete of trap / granite / quartzite / gneiss metal for approach slab /Rigid pavement including compacting,finishing,curingetc.complete. (excludingreinforcement)(withreversibledrumtypemixer/concretebatchmixplant(panmixer)withSCADAwithfineagreegatesofrequiredspecifications(Naturalsand/VSIsandfinelywashedetc),cement6.40 bags/cumt) |
| 6 | Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete |
| 7 | Supplying soft murum at the road site, including conveying and stacking complete. |
| 8 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 9 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on frontside and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size35mmx35mmx3mm duly painted including TwoM.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
