|
| 1 | SUB-HEAD : B (HVAC Works )Out-door unit (VRV X) Supply and InstallVRV X out door unit Equipped with 100 %inverter scrol compressor < ( dust Free, Moisture Free circuit Boards) ,4 -face condenser with blue Fin coating dual Inverter High Static condenser Fans anf its runs on 3 phase 380-420 V Range and cools using Ozone friendly R410a gas. Including Shifting & positioning of VRV type outdoor unit consists of compressor, condensor coil condensor fan,control panels etc as per the specs of the following capacities. |
| 2 | Capacity 10 Hp (Daikin model- RXQ10ARY6 or approved equivalent) |
| 3 | Capacity 12 Hp (Daikin model- RXQ12ARY6 or approved equivalent) |
| 4 | Indoor Units Supply and installation of VRV Indoor units with control through cordless remote controller ,accessories included:wireless remote controller & Refnet Joints Round Flow cassete; |
| 5 | Capacity 4.15 TR (Daikin model FXFSQ125ARV16 or approved equivalent) |
| 6 | Capacity 3.31 TR(Daikin model FXFSQ100ARV16 or approved equivalent) |
| 7 | Capacity 1.65 TR(Daikin model FXAQ50ARVE6 or approved equivalent) |
| 8 | Supply and lay /Draw PVC insulated FRLS flexiblepower cable of 1100 volts grade with copper stranded conductor of size 4 core 10Sqmm |
| 9 | Supply and lay /DrawPVC insulated FRLS Flexiblepower cable of 1100 volts grade with copper stranded conductor of size 3 core 2.5 Sqmm |
| 10 | Supply and fixing of the following sizes of steel conduit along with accessories in surface /recess including painting in case of surface conduit or cutting the wall and making good the same in case of recessed conduit as required. |
| 11 | 32 mm dia |
| 12 | Supply and fixing of the following sizes of medium class PVC conduit along with accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required |
| 13 | 25 mm dia |
| 14 | 32 mm dia |
| 15 | Supplying and fixing of following ways surface/ recess mounting,vertical type, 415 V, TPN MCB distribution board of sheet steel,vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. |
| 16 | 12 way ( 4+36 ) ,double door |
| 17 | Supplying and fixing of below rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 18 | MCB 4 pole 100 Amps |
| 19 | Supplying and fixing of Following type IP65 weather proof cabinet on surface or in recess complete with connections, testing and commissioning etc. as required. |
| 20 | 4 Module Weatherproof MCB Enclosure |
| 21 | Supply and fixing 4pole 415 V RCCB 25 A 300mA |
| 22 | Supplying and fixing following rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 23 | Single pole MCB 2 / 3 A |
| 24 | Supply and installation of copper refrigeration piping duly insulated with nitrile insulation of specified thickenss. |
| 25 | Supply laying, commissioning of 1.0 sqmm 2 core communication cable with including accessories as required at site. |
| 26 | SITC of PVC drain pipe with supporting clamps and 9 mm thick Nitrile rubber tube insulation of the following sizes. |
| 27 | 25/32 mm |
| 28 | Pressure testing/leak tetsing of the entire system with Nitrogen gas and vaccumizing the nitrogen gas and dehydrating of refrigeration pipes for all indoor and out-door units as specified above. |
| 29 | Supply and charging of Gas R410a of required quantity including leak testingandcommissioningof entire VRV systemand handing over system. |
