Repairing work of Ayurvedic Health centre Singorai - Earth work in excavation in foundation trenches or drains including dressing of sides & ramming of bottoms, lift up to 1.5M incl. Taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50m all kinds of soil. 2 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). 3 Providing and laying damp-proof course with cement concrete grade M-15 (1 : 2 : 4) mortar prepared with 1% solution of water-proofcompound complete as per specification . 50mm thick. 4 Random rubble dry stone Kharanja under floor. 5 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 6 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles ISI marked [IS : 13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and pillar). Category-A : Kajaria, Jhonson, , Somani make. 7 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab upto 2001Sqcm 8 Brick masonry for superstructure upto third storey with bricks of class designation 75 in : cement mortar 1:6 (1 cement : 6 coarse sand). 9 Half brick masonry in Superstructure , above plinth level upto floor Vlevelusing bricks of designation 75 Cement mortar 1 : 6 (1 cement : 6 coarse sand) 10 Providing Batta (Gola) 75mmX 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standard design. 11 Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, ralthal, stone kharanja, lime terracing 90mm average thickness [as per JAIPUR PRACTICE] with ceiling pointing in cement sand mortar 1 : 3 complete as per specification for span :-Above 3.00 metre and upto 3.30 metre. 12 Providing and laying brick kharanja on roofs with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound in square pattern, 55mm to 60mm thick average 13 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finished 12 mm thick. 14 Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish :20mm thick . 15 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand) 16 Grading roof water proofing treatment with : cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). with water proof compound as per manufactures specification. 17 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding. old work (one or more coats) including scrapping surface and necessary repairs.change colour 18 Painting with enamel paint of approved brand and manufacture to given an even shade two or more coats One or more coats on old work. 19 Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding:old work (one or more coats) 20 Wall painting with Royal Play paint with various types of designs as approved of approved brand and manufacture to give an even shade including all scaffalding. Two or more coats on New work including preparation of base with primer, putty lippy etc. Complete in all respect. 21 Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038- 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :Windows side hung /Ventilators top or centre hung openable) 22 Providing and fixing Square bars or other flat welded to window, ventilatiors etc. 23 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :Wire Gauge 14 mesh x 24 gauge 24 Providing and fixing pressed steel mitred door frames manufactured from commercial mild steel sheet of 1.25mm (16 gauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with C.C 1:2:4( M-15 Grade)complete in all respect as directed by Engineerin-charge:profile b 25 Providing and fixing M.S. sheet Double leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint 26 P & F PVC storage Tank (IS : 12701 marked indicating the BIS license No.), of approved make with cover, 25mm dia 1M long G.I. over flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design : 500 litres capacity. 27 P & F rigid PVC pipe (IS : 4985 mark) Class II (4Kg/ Cm2) approved quality/make including jointing the pipe with solvent cement rubber ring and lubricant: 110mm dia. 28 P & F Rigid PVC pipe fittings (IS : 4985 mark) of approved quality/make including jointing the fitting with solvent cement rubber ring and lubricant. Bend 87.5, 110mm dia 29 (a) Bend 87.5, 110 mm 30 (b) Pipe Clip, 110 mm 31 P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 530x410mm. 32 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall.PVC with PVC bend as per IS : 7231 33 P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.Size 510 mm x 400 mm 34 P & F Grating of approved quality/make.Stainless Steel Sheet size 125mm dia. 35 P & F Bib Cock (IS:8931 Mark), Superior quality of approved make.CP Brass bib cock, 15mm nominal bore. 36 P & F Inlet Connection (Angle Valves) Superior quality, of approved make for Wash basin, Gyset etc, C.P. Inlet connection 15mm. Brass (IS:8931 marked) 37 Brass / Gun metal half-turn wt. 1 kg. of approved quality / make, 25mm nominal bore. 38 Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 gradeC.C floor &RCC slab covering with M15 grade c.c. floor,50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cementcover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 200x100x130 cm.(for 10 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 8mm ϕ @15 cm c/c bothways including shuttering complete in all respect. 39 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 40 (a)15 mm nominal outer dia pipes 41 (b) 25 mm nominal outer dia pipes 42 P & F W.V.C. (IS: 2556 Mark) Squatting Urinal of standard make complete. Including cutting & making good the floor:Size 450x350mm
