|
| 1 | Providing and fixing of L & T (Cat.No. CO51000OSOO) / Siemens make Onload manual changeover switch in sheet steel enclosure of 1000 amp415V fitted in MS angle frame of (angle size 75 x75x 6mm thick) fixed at floor with iron metal fastners (12mm and 150mm long) & bekelite sheet of 6 mm thick of required size at frame as directed by engineer in charge, including making connection with the main supply including thimble of required size at both ends etc. complete in all respect as per direction and satisfaction of engineer in charge. |
| 2 | Providing and fixing of L & T (Cat.No. CO58000OSOO) / Siemens make Onload manual changeover switchin sheet steel enclosure of 800 amp415V fitted in MS angle frame of (angle size 75 x75x 6 mm thick) fixed at floor with iron metal fastners (12mm and 150mm long) & bekelite sheet of 6 mm thick of required size at frame as directed by engineer in charge, including making connection with the main supply including thimble of required size at both ends etc.complete in all respect as per direction and satisfaction of engineer in charge. |
| 3 | Supplying and fixing Finolex/National/kalinga Gold make 300 mm² P.V.C Innersheathed armoured 3.5 core A2XWY/A2XFY aluminium conductor cable suitable for voltage grade up to 1100V complete with thimbles connectors Insulating tapes, glaned of required size etc. as required for making connection from change over switch to air circuit breaker.Complete as per direction and satisfaction of engineer-in-charge. |
| 4 | Providing and fixing B C H/L& T make Air Break Push Button operated fully automatic citation star-delta starter (Cat. No. NASACT3LEC5M) comprising of three Nos. citation M-5 contactors (110 Amps), one No. over load relay (Relay range: 56.40- 90.00Amps), and one No. pneumatic timer suitable for operation on 400/ 440 volt, 3 phase, 50 Hz A C supply in sheet steel enclosureincludingproviding and fixing required copper thimbles, making electrical and earth connections, also mounting the starter on existing M.S frame including testing and commissioning etc. complete as per the satisfactionof engineer in charge. |
| 5 | Providing and fixing B C H/L& T make Air Break Push Button operated fully automatic citation star-delta starter (Cat. No. NASACT2LEEM) comprising of three Nos. citation E contactors (70 Amps), one No. over load relay (Relay range: 37.60 - 60.00Amps), and one No. pneumatic timer suitable for operation on 400/ 440 volt, 3 phase, 50 Hz A C supply in sheet steel enclosureincludingproviding and fixing required copper thimbles, making electrical and earth connections, also mounting the starter on existing M.S frame including testing and commissioning etc. complete as per the satisfactionof engineer in charge. |
| 6 | Providing and fixing B C H/ L& T makeAir Break Push Button operated fully automatic citation star-delta starter (Cat. No. NASAMLEN ) comprising of three Nos. citation N0N contactors (25 Amps), one No. over load relay (Relay range: 17.4- 24.00Amps), and one No. pneumatic timer suitable for operation on 400/ 440 volt, 3 phase, 50 Hz A C supply in sheet steel enclosureincludingproviding and fixing required copper thimbles, making electrical and earth connections, also mounting the starter on M.S frame including testing and commissioning etc. complete as per the satisfactionof engineer in charge. |
| 7 | Providing and replacing the existing no-good pressure gauge by providing new150 mm diameter Fiebig / Guru make pressure gauge (bottom connected, surface mounting) of 0 to 7kg/cm squareincluding providing & welding 15 mm G.I. socket to the new pressure gauge by providing & fixing 1 meters long, 15 mm dia. G.I. pipe (class B) including fittings, cutting , welding, threading etc. as per the site requirement & testing etc. complete as per direction and satisfaction of engineer-in-charge. |
| 8 | Providing and replacing the existing no-good vaccum gauge by providing new 150/140 mm diameter Fiebig / Guru make vaccum gauge (bottom connected, surface mounting) of 0 to (-)760 mmHg rangeincluding providing, welding (if required) and fixing the inlet of gauge with 15 mm dia G.I./ CPVC socketto the new pressure gauge by providing & fixing 1 meters long, 15 mm dia. G.I. pipe (class B)including all fittings, cutting , welding, threading etc. as per the site requirement & testing etc. complete as per direction and satisfaction of Engineer-in-charge. |
| 9 | Providing and replacingAE make (144*144) square mm dia dial (0 -100) Amps range Amper metres with C.T operated and suitable for operation on 440 Volts AC supply including the fixing new C.T 100/5A and dismantling exisitng meter and fixing new one,thimble,cartage,pvc tapes etc.) Complete as per direction and satisfaction of engineer in charge. |
| 10 | Providing and replacingAE make (144*144) square mm dia dial (0 -200) Amps range Amper metres with C.T operated and suitable for operation on 440 Volts AC supply including the fixing new C.T 200/5A and dismantling exisitng meter and fixing new one, thimble, cartage, pvc tapes etc.) Complete as per direction and satisfaction of engineer in charge. |
| 11 | Providing and replacingAE make (144*144) square mm dia dial (0 -600) Volt range Voltmeter and suitable for operation on 440 Volts AC supply including dismantling exisitng meter and fixing new one,thimble,cartage,pvc tapes etc.) Complete as per direction and satisfaction of engineer in charge. |
