|
| 1 | labour for Demolition of Brickwork or stone/boulder masonry. Built in cement mortar or cement lime mortar. |
| 2 | Removing building materials to a distance of 1000 M beyond the lead including in the rates including loading and staking at the destination as directed. |
| 3 | M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq. m on plan and n exc 1.5 m in depth and getting out in hard /dense soil |
| 4 | M&L for Hard-core of brocken stone or boulder gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 5 | M&L for Cement concrete in foundations, filling and mass concrete Type C2 1:3:6 (40 mm graded aggregate) |
| 6 | M&L for reinforce cement concrete Type B0 1:2:4 (12.5 mm graded aggregate)for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete |
| 7 | M&L for reinforce cement concrete Type B01:2:4 (12.5 mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span |
| 8 | M&L forreinforce cement concrete Type B01:2:4 (12.5 mm graded aggregate) Columns, pillars, piers, posts and struts |
| 9 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 10 | M&L for Mild steel TMT bars but 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 11 | M&L for Formwork flat to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finish surface |
| 12 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions Squarerectangular or polygonalfor fair finished concrete surfaces |
| 13 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM1:6 |
| 14 | M&L for rendering 15mm thick plaster on wall fair faces of brick work or concrete surface with CM 1:6 & rendering is to be finished even and smooth ( without using extra cement). |
| 15 | M & L for preparation of new plastered surfaces on wall by brooming down etc. and distempering walls with distemper oil emulation white or tinted in two coats with one coat of priming plastered and other surface with alkali resistant priming paint as per SSR specification Colour and quality will be verified by EIC (Make - Berger, Asian paints, Nerolac, Dulux, Indigo paint). |
| 16 | M&L for Broken glass coping on top of walls In cement mortar 1:3 |
| 17 | S&F of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, tc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe-410-W(gde-E-250) quality -B |
