|
| 1 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, including taking out embedded portion and making good disturbed ground complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for& removing clear off site after credit is recovered by the dept complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in deep for foundation, laying pipes etc or for shaft, walls, manholes, pier holes etc not exceeding 10 sqm on plan and not exceed 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge |
| 4 | Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance not exceeding 50 m and depositing where directed and making good the disturbed surface complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge |
| 7 | Material and labour for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Material and labour for plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate asin foundation filling and mass concrete complete all as specified and directed. |
| 9 | Supply and fix mild steel TMT bars, 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 10 | ditto as per item no.9 above but 5mm dia and over up to incl. 10mm dia in stirrups, spaces and binders complete all as specified as directed by Eng-in-charge. |
| 11 | Material & Labour for Formwork to sides of square/rectangular pillars, posts, struts, piers, columns and stanchions for rough finish surface of concrete complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Material and labour for 15mm thick rendering with cement mortar 1:4 on fair faces of brick or concrete surfaces and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge |
| 13 | Demolition of cement concrete (unreinforced) of any description and in any position, not otherwise specifically provided for and removal of rubbish outside MD land etc complete all as specified and as per directed all as specified and as directed by Engineer-in-Charge. |
| 14 | Material and labour for providing Plain cement concrete 1:2:4, type B1(Nominal mix) using 20mm graded stone aggregates as in copingor bed block at security wall and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Material and labour for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate asin foundation filling and mass concrete complete all as specified and directed. |
| 16 | Supply and fix framed brackets for swan neck frame on top of boundary or any other uses of angle or tees with web flanges cut to a shape,drilled and counter sunk for screw,incl bending and welding angle as necessary plates, riveting etc, confirming to Fe-290 Grade E-165 complete including all as specified and directed by Engineer in charge. |
| 17 | Material and labour in repairs for galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provn of galvanized mild steel wire staples or steel pins etc as directed (each line of wire to be measured), complete all as specified and as directed by Engineer-in-Charge. (Make : Consec ofM/s Shiva Engineering Company or any other make conforming to IS as approved by GE ) |
| 18 | Supply and fix Chain link fencing of size 50x50mm mesh size made of 10 gauge GI wire, streched and fixed to fencing post all as specified and directed by Engineer-in-Charge.(Make : Consec ofM/s Shiva Engineering Company or any other make conforming to IS as approved by GE ) |
| 19 | Material and labour for mild steelwork as in flat iron including fixing clamps or support to chain link fencing, wind ties and fixed to post with all fittings including securing bolts, all necessary welding, drilling, bolting, riveting etc confirming to Fe 290 Gde E-165 all as specified and as per directed. |
| 20 | Material and labour for Mild Steel screw bolts(Machine made), exceeding 5cm and n exceeding 10cm long, dia of neck 16mm complete all as specified and as directed by Engineer-in-Charge. |
| 21 | Material and labour for Pre-cast cement concrete block masonry 1:3:6 type C1, (using 20mm graded stone aqggregate), with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Material and labour for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge.Make: Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux |
| 23 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Material and labour for Pre-cast cement concrete block masonry 1:2:4 type B1, (using 20mm graded stone aqggregate), with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 25 | Removing excavated material to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge |
| 26 | Material and labour for providing Plain cement concrete 1:2:4, type B1(Nominal mix) using 20mm graded stone aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Material and Labour for reinforced cement concrete (Nominal mix) 1:2:4 using 20mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, chajja, shelves and like complete all as specified and directed by Engineer-in-Charge. |
| 28 | Material & Labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finish surface of concrete complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Material & Labour for Formwork to soffits of suspended slabs such as floor slabs, roof slabs, landings and similar work not exceeding 200mm thick (horinzontal or sloping) for fair finish surface of concrete complete all as specified and as directed by Engineer-in-Charge. |
| 30 | Material and labourfor preparation of new plastered surfaces of wall &applyingtwo coats of cement based paint complete all as specified and as directed by Engineer-in-Charge.Make : Snowcem/Duracem/Aquacem/Berger/Shalimar |
| 31 | Supplying,installing, testing split type Air conditioner units indoor and outdoor complete with cordless remote control unit and with in-built cooling arrangement and digital inverter, air ioniser and Plasma filter fo better indoor air quality with 5 star rating of 2 ton capacity having dual inverter compressor, copper condensor cooling coil complete all as specified and as directed by Engineer-in-Charge.Make :- Carrier/ Voltas/Daikin/Hitachi |
| 32 | Note:Deduct Credit for demolished / dismantled material of Rs. (-) 22,550.00 (Minus) as listed in Schedule of Credit.Tenderers will not quote against this item being a tentative amount to be considered to arrive at the \"Contract Sum\" |
