Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-01-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-01-2025 |
| 2 | 08-01-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-01-2025 |
| 3 | 26-12-2024 | BOQ Revised | BOQ | 08-01-2025 |
| Sl. No. | Item Description |
| 1 | S&F 5.5 mm thick plain sheet glass selected quality, cut to size fixed in aluminium windows by using rubber gasket and aluminium snap beads, complete all as specified and directed |
| 2 | Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including fourth story and on the roof top/mumty/parapet and removal of debris and rubbish out sideMoD land complete all as specified and directed. |
| 3 | Demolition of brick work built in cement mortar in any description and position complete all as specified and directed. |
| 4 | S&F in repair PVC branch piece single (equal or unequal) 75 mm bore ordinary or inverted (spigot or sockettype) or with parallel branches inclaccess door complete all as specified and directed |
| 5 | Demolition of cement concrete (un-reinforced) in ground floors and paving n.exe 15cm thickness (below or above ground level) including removal of rubbish out side complex (MOD land), complete all as specifiedand directed. |
| 6 | Dismantling of RCC/PVC water tanks exc 250 liters and n.exc 500 liters capacity of any condition or type complete all as specified and directed. |
| 7 | Dismantling of Cast Iron pipe/PVC pipe up to 100 mm bore complete all as specifiedand directed. |
| 8 | Dismantling of Cast Iron pipe/ RCC drain pipe/PVC pipeup to 150 mm bore complete all as specifiedand directed. |
| 9 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) laid bedded and pointed in any mortar and removal of old tiles from premises complete all as specified and directed. |
| 10 | Dismantling of floor of WC and bath not exc 300mm deep and removing out the cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditions, grinding any sharp edges etc complete all as specified and directed.(b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(c) M&L for a glass fiber reinforced acrylic modified cementitious coating system with base coat@ 1.50 Kg/Sqm glass fiber reinforcement and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or MC Bauchemie India Pvt Ltd.(d) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with as specified.(e) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(f) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(g) The area of Each WC portion is n.exc 2.00Sqm each.(h) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.Note : The work will be executed by authorised manufacturers/applicator. |
| 11 | M&L for cutting chases on brick or concrete surface for concealed water tubing or girth n.exc 10cm including making good of disturbed surfaces with PCC (1:2:4) type B0 using 12.5 mm graded aggregate complete all as specified and directed. |
| 12 | Dismantling of Brick tiles or terracing tiles, single layer on roofs, kerbs, aprons, etc (each layer) and removal of rubbish out of defence land complete all as specified and directed. Note : All roots of plant on either on wall or roof to be removed and making good the disturbed surfaces. |
| 13 | Demolition of Mud Phuska in roofs, any thickness including plastering and leeping of any thickness upto 30cm deep complete all as specified and directed. (Note: All roots of plant on either on wall or roof and to be removed and making good the distributed surfaces. |
| 14 | Taking down chowkhat or frames exc. 1.5 Sqm and n.exc 4 Sqm eachwith shutters (without taking off shutters from frames) complete all as specified and directed. |
| 15 | Taking down chowkhat or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from frames) complete all as specified and directed. |
| 16 | S&F health faucet 8 mm dia 1.2 mtr long flexible tube & wall hook complete all as specified and directed. |
| 17 | Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish, vegetation etc outside complex (MOD land) complete all as specified and directed. |
| 18 | M&L for PCC (1:2:4) Ty B-0 using 12.5mm thick course aggregate as incills, steps, parapets, copings, andthe like including weathering, slightly rounded or chamfered angles and throating complete all as specified & directed |
| 19 | Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 165x60mm made out of 1.25mm MS sheets including PCC (1:2:4) Ty B0 using 12.5mm graded stone aggregate as in frame complete all as specified & directed. |
| 20 | Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm MS sheets including PCC (1:2:4) Ty B0 using 12.5mm graded stone aggregate as in frame complete all as specified & directed. |
| 21 | S&F factory made steel shutter shall be made out of angleiron 35x35x5mm and 3 nos 25x25x3mm as cross support in frame of door and covered with 1.00mm thick MS sheet, running welding with frame, with locking arrangement including two coats of synthetic enamel paint over a coat of red oxide as shown on drawing complete all as specified & directed |
| 22 | S&F 35mm thick factory made glazed and skeleton shutters using second class hard wood, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed |
| 23 | S&F35mmthickFlush shutters \"factory made\", solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 24 | M&Lfor built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm th with pressed steel shutter 1mm th Godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arrangement painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in cm (1:3) or PCC (1:2:4) complete all as specified. |
| 25 | S&F factory made gauged shutter shall be made out ofangle iron 35x35x5mm (outer frame) and 25x25x5mm (middle rail 2 nos, 150 mm apart from each other) and 1.0mm thick steel sheet covering on middle rail, 10mm Square bars @ 100mm C/C fixed vertical as grill complete with stainless steel fly proofwiremeshhaving 0.63mm nominal dia wire and 1.4mm average with aperture, with locking arrangement including two coats of synthetic enamel paint over a coat of red oxide as shown on drawing complete all as specified and directed |
| 26 | S&F 100 mm long(size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin, complete all as specified and directed. |
| 27 | S&F 75 mm long(size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin, complete all as specified and directed. |
| 28 | S&F 300mm long, stainless steel of AISI 304 grade,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed. |
| 29 | S&F Stainless steel of AISI-304 grade barrel tower bolt 200 mm long, extruded section complete all as specified and directed. |
| 30 | S&F Stainless steel of AISI-304 grade barrel tower bolt 150 mm long, extruded section complete all as specified and directed. |
| 31 | S&F 150 mm size stainless steel bright finish handles forshutter complete all as specified & directed. |
| 32 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of 140mm long complete all as specified and directed. |
| 33 | M&L Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 34 | M&L Preparation of new or previously untreated steel and steel based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 35 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified & directed |
| 36 | M&L for powder coated aluminium anodised window sliding type (3 shutters type) with sash bars, aluminium sections weighing 0.55 Kg/m (min) including stainless steel wire mesh, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame, complete all as specified and directed. |
| 37 | M&L for powder coated (50 micron thick) aluminium ventilator fixed type (partly glazed and partly gauzed) with gasket, glazing clip etc, weight of frame not less than 0.55 Kg/RM and weight of shutter frame not less than 0.425 Kg/RM including necessary joining cleats, rubber packing, anodised aluminium snap beading, screws suitable anodised fittings such as, hinges, complete all as specified and directed. |
| 38 | S&F stainless steel (grade-304) grills made of hollow tubes section including welding, grinding, buffing polishing and making curvatures wherever required and fitting the same with necessary hold fasts/SS dash fastners with nut & bolts of required size, complete all as specified and directed. |
| 39 | M&L for 18 to 20 mm thick Udaipur green Stone factory made bull nosed, polished (table rubbed and polished) as injambs, window cills, cooking platform and the like etc in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar (1:4) including rounding of edges, making hole for gas pipe complete all as specified and directed. |
| 40 | M&L brick work using kiln burnt sub class \"B\" old size bricks, straight or curved on plan exc 6 m mean radis built in CM (1:6) complete all as specified and directed |
| 41 | M&L for brick work using kiln burnt sub class \"B\" old size bricks, straight or curved on plan to any radius in half brick thick wall built in CM (1:4) completeall as specified and directed. |
| 42 | M&L for mild steel TMT bars of 10 mm dia and over cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 43 | M&L for providing reinforced cement concrete(1:2:4) type B-1 using 20 mm graded crushedstone aggregate as in kitchenslab, complete all as specified and directed. |
| 44 | M&L for providing reinforced cement concrete(1:2:4) type B-1 using 20 mm graded crushedstone aggregate as inChajjas complete all as specified and directed |
| 45 | Use & waste form work to sides and soffits of shelves etc including supports such as kitchen shelves, platforms and similar works rough finish surface of concrete (the thickness of slab/shelves n.exc 100 mm) complete all as specified and directed. |
| 46 | Use & waste form work to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed |
| 47 | M&L Rendering 5mm thick plastering in cement mortar 1:3 as in ceiling finished even and smooth without using extra cement to match with existing surface complete all as specified and directed. |
| 48 | M&L Rendering 15 mm thick in cement mortar (1:6) on fair face of brick work/concrete surfaces (either surfaces) of wall and finished even and smooth without using extra cement complete all as specified and directed. |
| 49 | M&L Rendering 5 mm thick in cement mortar (1:4) over a layer of 10mm thick rendering in cement mortar (1:6) on fair face of brick work/concrete surfaces of wall with water proofing admixture finished even and smooth without using extra cement complete all as specified and directed. (WPC will be measured and paid separatly) |
| 50 | M&L Non-skid coloured ceramic glazed rectified tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick screed bed in CM (1:6) complete all as specified anddirected |
| 51 | M&L Coloured ceramic rectifiedtiles 300x600 x 7 to 8mm thick, as in vertical surfaces of wall such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in CM (1:4) complete all as specified & directed. |
| 52 | M&L for 16-18 mm thick Pre-polished machine cut kota single piece, single colour uniform texture stone slab of size 22\"\"x22\"\" for flooringover cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slablaid over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed |
| 53 | M&L kota stone Pre-polished with uniform texture of 16-18 mm thick in trader of steps (to be flushed and provided with three Nos of grooves at the end on each step), riser of steps, skirting, dado and pillars in one single piece (size decided by Engineer-in-Charge) laid over and including cement screed 10mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing, bevelled edge of corner etc complete all as specified and directed. |
| 54 | S& F PVC (SWR) vent cowl suitable for 75 mm pipe complete all as specified and directed. |
| 55 | S&F white colour Rotational moulded polyethylene water storage tank 500 liters capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed. |
| 56 | S&F in repair vitreous chinaware coloured wash hand basin (WHB) size 550mm x 400mm, Ist quality, including provision of pair of mild steel angle iron brackets of suitable size duly painted and cutting for and pinning in ends of brackets in walls & making good & including providing and fixing of suitable heavy duty waste pipe and waste fitting complete all as specified and directed. |
| 57 | S&F in repairs PVC duel action symphonic action type flushing cistern 10 ltr capacity, low level, white with inlet, ball valve and floatincluding brackets and flush pipe complete all as specified & directed. |
| 58 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 59 | S&F in repair stainless steel sink AISI 316 grade without drainage board of 1 mm thickwith plug, washer and waste, including bedding in cement mortar to dwarf wall or including CP Waste, PVC Down pipe etc andfixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowlsize 410mm x 330mm x 160mm or more complete all as specified & directed. |
| 60 | S&F in repair Chromium platedtubular towel rail, 20mm dia, ‘D’ type 60cm long between flanges of brass chromium platedand fixed with brass screws complete all as specified and directed. |
| 61 | S&F in repair stainless steel peg set of six complete all as specified and directed. |
| 62 | S&F in repair 15 mm dia stop cock/angle cockcast copper alloy chromium plated screwed downhigh pressure with crutch or butterfly handle,with long shank and cup (concealed type), flenchscrewed both ends for iron or for union complete all as specified and directed. |
| 63 | Supply & fix wall mixer chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm borepipes complete all as specified and directed. Make Jaquar Florentine FLR-CHR-5273 UPR/ Pearl GPR-884/ CERA-F1017401. |
| 64 | S&F in repair bib taps brass chromium plated 15 mm bore size screwed down screwedfor iron pipe or for brass ferrule complete all as specified and directed (Make: Cera cat no F1015151/Jaquar cat nocontinental CON-CHR-047 KN/ Pearl cat no ARI-003. |
| 65 | S&FinrepairBrasschromium plated shower rose125mm size complete all as specified and directed. |
| 66 | S&F in repair Stainless steel grating 100mm dia of best quality as approved by GE including fixing in CM (1:4) to floor/ nahani traps etc complete all as specified and directed. |
| 67 | S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight210 gms) complete all as specified and directed. |
| 68 | S&F in repair Looking mirror 600 x 450 mm beveled edge 5.5 mm thick selected quality glass, mounted on 6 mm thick commercial ply, aluminium frame around and fixed to wooden plug with CP brass screws and cup washerscomplete all as specified anddirected. |
| 69 | S&F in repair PVC connection 15 mm bore and 45cm long with washers complete all as specified and directed. |
| 70 | S&F in repair Stainless steel chromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 71 | S&F PVC (SWR) pipes of 110 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.80 mm) single socketed in any length with rubber ring joints including all fittings/fixtures fixed on wall or in trenches or in floor complete all as specified and directed. |
| 72 | All as per above but 75mm nominal outside dia meter. |
| 73 | S&F PVC (SWR) junction, 110mm dia (double T) or unequal provided with access door complete all as specified and directed. |
| 74 | S&F PVC (SWR) 75mm dia (single T) or unequal provided with access door complete all as specified and directed. |
| 75 | S&F 110 mm bore PVC (SWR) bends/shoes any radius complete all as specified and directed |
| 76 | All as per above but 75 mm bore. |
| 77 | S&F in repairs, plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover icluding mild steel chromium plated hinging device complete all as specified and directed |
| 78 | S&F in repair PVC (SWR) floor trap, 75mm dia plain including jointing with solvent cement with grating includingjointing to waste pipe in cement concrete complete all as specified and directed. |
| 79 | S&F in repair PVC branch piece single (equal or unequal) 110 mm bore ordinary or inverted (spigot or sockettype) or with parallel branches incl access door a complete all as specified and directed |
| 80 | S&F PVC (SWR) reducers 110mm dia, complete all as specified and directed. |
| 81 | S&F in repair 110 mm pipe stack clamps out of 50mmx 5 mm flat iron includingbolts and nuts and securing ends of stays to walls or roof complete all as specified and directed. |
| 82 | S&F in repair 75 mm pipe stack clamps out of 50mmx 5 mm flat iron includingbolts and nuts and securing ends of stays to walls or roof complete all as specified and directed. |
| 83 | M&L 75mm thick cement concrete (1:3:6) type C2 (using 40mm graded stone agg). Plinth protection laid to a slope of 1 in 24 in alternate basis system. Each bay shall not exceed 3m in length. 12mm wide & 75mm deep joint shall be formed between the bays which shall be filled with mastic filling to full depth comprising a mixture of 1 part of hot blow bitumen 85/25 portion and two parts of heated badrapur sand (by volume) etc complete all as specified and directed. |
| 84 | S&F FRP factory made door frames three legged of cross section 90x45mm having single rebate 32mmx15mm. The laminated door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminated shall be 2mm thick, frame shall be covered with fiber glass from all sides MS flat iron 25x3mm shall be provided at the bottom to steady the frame including PCC (1:2:4) Ty B0 using 12.5mm graded stone aggregate as in frame, complete all as specified and directed. |
| 85 | M&L Cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone agg) as in roof leveling, finished even and fair, complete all as specified and directed |
| 86 | Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4section) in cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 100/150mm dia pipes complete all as specified and directed. |
| 87 | M&L mild steel Frame work as in door chowkhat with angle ironwelded together ends of angle shouldered and fixed to opening and welding 3 Nos mild steel butt hinges, and 6 nos hold fasts made out of FI 25x3 mm 30 cm long for fixing of chowkhat (Butt hinges paid separately) complete all as specified and directed |
| 88 | Supply only liquid water proofing compound complete all as specified and directed. |
| 89 | S&F 25mm SS steel curtain rod covered fancy typebracket and end caps complete all as specified and directed. |
| 90 | Preparation of new plastered surface or old treated surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of weather coat pain and approved make over a coat of primer complete all as specified & directed. |
| 91 | Preparation of new plastered surface or old treated surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsiondistemper using roller for painting complete all as specified & directed. |
| 92 | M&L for preparing plastered new surfaces of ceiling and applying three coats white wash on ceiling surfaces complete all as specified & directed. |
| 93 | S&F in repairs 15mm bore Pillar tap of Chromium plated high pressure screwed for iron pipe and fixed etc but fancy type complete all as specified and directed. |
| 94 | S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified & directed. |
| 95 | S&F Continuous (Piano) hinges, mild steel, bright finish or electrogalvanised with width of flap 40mm complete all as specified & directed |
| 96 | S&F Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, 100mm complete all as specified & directed |
| 97 | S&F Magic eye piece to door shutter complete all as specified and directed. |
| 98 | Supply and fix glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed. |
| 99 | S&F Fiber glass reinforced plastic (FRP) Flush door factory made in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing offittings and polyurethane foam (PUF) polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameter of FRP, laminate confirming to table 3 of IS-14856 complete all as specified by the manufacturer and as per direction. |
| 100 | S&F Stainless steel 4 shelf wall mounted kitchen utensils rack, Dish rack with plate & cutlery stand of size 18x24 inches, fixed to wall plugs and chromium plated brass screws complete all as specified and directed. |
| 101 | S&F in repair of vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) includingreplacement of ‘P’ or ‘S’trap lime concrete bedding and making good floor completeallas specified and directed. |
| 102 | S&F joint free non skid ceramic tiles coloured of7 to 8 mm (squre/rectungular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 103 | All as per item No 102 above but as in skirting over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed. |
| 104 | M&L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas, wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making gooddistrubed surfaces to match with existingfinihes with andincl material and labore in CM (1:4) mixed with WPC/PCC (1:3:6) type B0/Bk work in CM (1:4) as required at site and as directed by Engr-in-Charge |
| 105 | S&F PVC (SWR) junction, 110mm dia (Single T) or unequal provided with access door complete all as specified and directed. |
| 106 | S&F PVC (SWR) 75mm dia (Double T) or unequal provided with access door complete all as specified and directed. |
| 107 | M&L for pre-laminated ply board 18 to 19 mm thick of density not less than 600 Kg/Cum fixed with screws & approved adhesive of good quality for cabinet car case and shelves as per sketch approved and both sides covered with 0.80 mm thick decorative laminates, \"Mica\" type 1 of surface finished, colour and pattern as approved as per makers instructions complete all as specified & directed. |
| 108 | S&F Auto hinges for cabinet case complete all as specified & directed (Make ; KARF / HETICH) |
| 109 | S&F 150 mm size stainless steel bright finish handle for cabinet shutter complete all as specified & directed |
| 110 | M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregates as in levelling course over RCC roof/floor slabs, complete all as specified & directed |
| 111 | Material and labour for 10 mm thick cement paster in CM 1:4 mixed with WPC @ 2% by weight of cement finished even and fair without using extra cement on roof surfaces,complete all as specified & directed. (Note:-WPC will be measured and paid seperately) |
| 112 | M&L for 75mm thick PCC (1:4:8) ty D-2 using 40mm graded stone aggregates as in levelling course below floor tiles in bathroom and WC complete all as specified & directed. |
| 113 | M&L for cutting hole of 230x230x230mm in walls, filling with PCC (1:2:4) Ty B-1 using 12.5mm thick stone aggregate incl fixing of 1Nos angle iron of size 50mmx50mm x6mm, 1m long each incl running welding with other angle, incl 2 coat of synthetic enamal paint over a coat of primer over exposed steel surfaces for cooler stand, complete all as specified and directed. |
| 114 | M&L for cleaning of concrete or plastered roof surfaces and applying priming coat using bituminous primer @ 0.30 kg per sqm followed evenly a tack coat @ 1.2 Kg per sqm using 85/25 grade industrial hot blown bitumen over it laid 2 mm thick APP modified polymeric water proofing membrane minimum weight 3.0 Kg per sqm reinforced with non-woven polyester fabric (weight not less than 160 gm per sqm) rolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer\"s instruction and applying over it a tack coat using industrial hot blown bitumen 85/25 grade @ 1.20 Kg per sqm and finally finished the top of polymeric water proofing membrane complete all as specified and directed. (Note:- Dismantling & Romoval of existing old water prrofing menbrane deemed to be included in quoted rate of this item) |
| 115 | M&L for 40mm thick brick tiles laid on cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed. |
| 116 | M&L forCement concrete tiles 25cm x 25cm x 20mm thick, using gray cement with pigment, machine pressed, set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 15mm thick cement mortar (1:4) complete all as specified & directed. |
| 117 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft and loose soil complete all as specified & directed. |
| 118 | M&L Hard core of broken bricks, broken to gauge n exc 63 mm complete all as specified & directed. |
| 119 | M&L 100mm thick cement concrete type C-2, (1:3:6) (40mm graded aggregate), as in sub base complete all as specified & directed. |
| 120 | Supply and laying sand (25 mm thickness ) for cushioning to interlocking paver block complete all as specified and directed. |
| 121 | M&L Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 122 | M&L for 60 mm thick Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade made with grey cement and pigment complete all as specified and directed. |
| 123 | M&L mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 124 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft loose soil complete all as specified and directed. |
| 125 | M&L Cement concrete (1:2:4) type B2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 126 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified & directed |
| 127 | Removing excavated surplus soil to a distance exc 250m and n.exc 500m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 128 | Returning filling in with excavated soil including spreading, leveling, watering & well ramming in layers not exc 25 cm thick complete all as specified and directed. |
| 129 | Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc to match with the existing surfaces of wall/floor complete all as specified & directed. |
| 130 | Dismantling and taking down carefully sub-main wiring/ service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc.complete all as specified & directed |
| 131 | Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as specified & directed |
| 132 | Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS-H) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making gooddisturbed surface, provision of GI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) as earth wire connected with main common earth dolly complete all as specified and directed for the following :- |
| 133 | One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed. |
| 134 | One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed. |
| 135 | One 3pin/5pin 5/6 Amps socket out let onindependent board controlled by one, one-way Piano type switch complete all specified and directed . |
| 136 | One light point controlled by two, two way piano switch5/6 Amps complete all specified and directed. |
| 137 | All as per item No 132 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLS-H but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLS-H cable as earthwire complete all specified and directed. |
| 138 | S&F switch piano flush type whitefinish 5/6 Amps, single pole one way, 230 volts, 50 hz complete all as specified & directed. |
| 139 | S&F socket out let2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed. |
| 140 | S&F switch piano flush type whitefinish 15/16 Amps single pole one way, 230 volts, 50 hzall as specified and directed |
| 141 | S &F socket out let5 pin 15/16 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed. |
| 142 | S&F switch piano flush type whitefinish 5 Amps, single pole two way, 230 volts, 50 hz complete all as specified & directed. |
| 143 | M&L bell push AC, SP 240 volts flush type 5/6 Amps, 230 volts, 50 Hz complete all as specified and directed. |
| 144 | S&F bell ding dong elelctric 230V ACsingle pole, as per standard specifications, complete all as speccified and directed. |
| 145 | S&F fan regulator, flush, stepped type, electronic type, 450 watt complete all as specified and directed. |
| 146 | Supply & fixing lamp holder (Straight), insulated body, with back plate for batten fitting complete all as specified & directed. |
| 147 | S&F LED Bulb 12 Watt having colour temp 6500 K lumen suitable for \"B-22 type to fix on batten holder complete all as specified and directed. |
| 148 | M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body complete all as specified & directed |
| 149 | Supply and fix sheet metal enclosures with metal socket and plug top Single pole and neutral enclosure with a two pin and earth plug and socket complete ISI marked, 230/240 volts, 50 hz with one single pole MCBSP 20 Amps complete all as specified & directed |
| 150 | Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar complete all as specified & directed |
| 151 | Supply & fixing MCB, SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, \"B\" series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 152 | Supply & fixing MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, \"B\" series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 153 | S&F LED tube light batten 20 watts 4 fts (T-5) extruded polycarbonate housing, translucent diffuser with LED light source, 2000 lumen, natural white, surge protection range-2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed. |
| 154 | S&F Decorative ultra slim round profile LED Tube light fitiing with extruded polycarbonate, energy efficient for mirror light 10 Watt 2 ft with LED light source with uniform light output, with all accessories, complete all as specified and directed. |
| 155 | Supply and fix LED 25 watt Building security light fitting mounting type made out of one piece in pressure die-cast aluminium housing with high efficient LED as lighting source and PC Cover separate compartment for driver, including bracket clamp and fixing accessories complete with electronic driver and all accessories. The fitting shall IP 66 protection, duly prewired complete all as specified and directed. |
| 156 | Supply and fixing sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 4.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS-H) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all as specified & directed |
| 157 | Ditto all as above but size 4 sqmm |
| 158 | S&F Ceiling fan complete with three blades down rod, accessories 230 V, 1200mm sweep, minimum air delivery 210 CFM, 5 star rated with BLDC motor, complete all as specified and directed .Note: Old Ceiling fan to be deposited in MES store Yard |
| 159 | S&F Exhaust fan Steel body AC single phase 230/240 Volt of size 300 mm sweep complete with louvers including making whole and grouting of nut bolts etc and making good to the disturbed sufaces of wall, with putty, POP, paint etc, so as to match existing surface condition, complete all as specified and directed .Note: Old Exhaust fan to be deposited in MES store Yard |
| 160 | S&F Exhaust fan PVC body AC single phase 230/240 Volt of size 250 mm sweep complete with louvers shutter including making suitable size hole and grouting of nut bolts etc, and making good to the disturbed sufaces of wall, with putty,POP,paint etc, so as to match existing surface condition, complete all as specified and directed .Note: Old Exhaust fan to be deposited in MES store Yard |
| 161 | Supply and fix GI tubing medium grade ISI marked of 50 mm bore dia complete all as specified and directed. |
| 162 | M & L for clamp made out of flat iron of size 50 mm x 5mm suitable for fitting on 50 mm GI pipe for hanging of ceiling fan complete with nut bolts washer etcall as specified and directed. |
| 163 | Supply and fix in replacement of MCCB/MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface. |
| 164 | Supply and fix MCCB 100A, 25 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release, fixed in Vertical TPN complete all as specified and directed. |
| 165 | Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 Volt, 10-60 Amp, single phase meter accuracy class-I 50Hz, conforming to IS13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified & directed |
| 166 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. (earth pit not less than 2.25 mtr depth below ground levelat any type of strata) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 25x4 mm GI strip as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC (1:3:6) type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM (1:4) funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 40 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing wire to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC (1:2:4) type B1, 80mm thick rainforced with XPM weighting not less than 4kg/sqm in lieu of CI cover.(ii)Cost of additional GI strip more than 7.5 mtrs will be measured and paid seperately under relevant items. |
| 167 | M&L for Circuit/submain wiring withsingle core (FRLS-H) PVC insulated copper stranded conductor cable drawing into existing PVC rigid conduit surface/concealed/casing caping as required of 1.5 Sqmm for Inverter wiring, including taking down unserviceable existing wiring etc complete all as specified and directed. |
| 168 | Taking up or down galvanised steel tubing and connections of any size and type compleate all as directed for following sizes :- |
| 169 | 15mm bore |
| 170 | 20mm bore |
| 171 | 25mm bore |
| 172 | Supply and fix galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall or ceiling complete all as specified and directed of the following bore. |
| 173 | 15 mm bore |
| 174 | 20 mm bore |
| 175 | Supply and fix or lay in trenches galvanised steel water tubing of size 25 mm medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in trenches / floors complete all as specified and directed. |
| 176 | Drilling and tapping cast iron water mains (in position) for branch connection of the internal dia of 25 mm, complete all as specified and directed. |
| 177 | M&L for Straight plain brass ferrules (or connecting screws) screwed both ends and fixed to water mains for tapping branch connection of size 20 mm bore, complete all as specified and directed. |
| 178 | Supply and Fix Gun metal gate valve, ISI marked, with iron wheel head screwed both ends for iron pipe, fixed in repairs complete of size 20 mm bore |
| 179 | Removing excavated material from site to a distance n. exc. 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr avove the starting point all as specified and directed by Engineer-in-Charge. |
| 180 | Dismantling & taking out old unserviceable LT UG cable & Supplying & laying in replacement of LT UG cable (Conforming to IS 1554) ISI marked 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor in trenches/ducts/through HDPE pipe under roads of size 16 sqmm 4 core complete all as specifed and directed. |
| 181 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls/pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed. |
| 182 | Labour and T&P for horizontal boring of hole passing through pavement/ road/hardstanding by manual or mechanical means suitable for 50mm bore complete all as specified and directed |
| 183 | Supply & fix deep freezer hard top of capacity 320 Ltr, double door, adjustable type electric driven single phase complete all as specified and directed. |
| 184 | Supply & fixing Refrigerator, electric driven (single phase) of capacity 322 Ltr, double door ecofriendly refrigerant BEE 3 star rated, complete all as specified and directed. |
| 185 | Supply & fixing water cooler fully stainless steel, electric driven (single phase) having approx storage capacity of 80 Ltr and nominal cooling capacity of 40 Litres per hour double push tap all as specified and directed. |
| 186 | Supply and fix electric water heater temp control regulator type storage type (Vertical mounted) ABS body with glass lined inner tank and copper heating element 2 KW capacity 25 litre, BEE 5 Star rated, ISI Marked, 240 V, 50 Hz, working pressure of 8 bar complete with all accessories such as safety valve, thermostate, NRV,Plug Top, Hot and cold water connection pipe all as specified and directed. Note: Writing MES No in 20mm letter size with black paint etc is deemed to be included in quoted rate. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
