Tender For Day To Day Requirements Of Sanitary, Hardware, Civil, Electrical Items At Tara Niwas Of Hospitality And Protocol Department At Udhampur For The Year 2024-25., Udhampur-Jammu And Kashmir

TDR : 46749831

Tender Notice
BOQ

Expired

Udhampur , Jammu And Kashmir

Tender Brief : Tender For Day To Day Requirements Of Sanitary, Hardware, Civil, Electrical Items At Tara Niwas Of Hospitality And Protocol Department At Udhampur For The Year 2024-25.

Document Fees
₹ 600 /-

EMD
₹ 22320.0 /-

Tender Value
₹ 11.16 Lakhs /-

Submission Date
27-12-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Demolishing cement concrete manually / by mechanical means including disposal of material within 50 meters lead as per direction of Engineer incharge: 1:4:8 or leaner mix (i/c equivalent design mix) (Incl. carriages complete job)
2	Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.
3	Extra for cutting reinforcement bars manually/by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional areas of R.C.C. or R.B. work) as per direction of Engineer-in-charge
4	Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work
5	Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar
6	Removing mortar from bricks and cleaning bricks incl. stacking with a lead of 50 Mtrs (Stacks of cleaned bricks shall be measured) from brick work in cement mortar
7	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :
8	Of area of 3 sqm. and below
9	Of area beyond 3 sqm
10	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :
11	Of area of 3 sqm. and below
12	Of area beyond 3 sqm.
13	CP Toilet paper holder
14	PVC seat cover
15	Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.
16	Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead. With cement mortar 1:4 (1 cement : 4 fine sand)
17	Renewing glass panes, with putty and nails wherever necessary including raking out old putty : :
18	Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)
19	Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm).
20	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
21	1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
22	1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
23	1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
24	1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
25	Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
26	Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
27	Extra for brick work/tile brick/AAC block masonry in superstructure above floor V level for each four floors or part thereof by mechanical means:
28	Half brick masonry with common burnt clay (non modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)
29	Extra for half Brick masonry in superstructure above plinth level upto floor V level.
30	Centering and shuttering including strutting, propping etc. and removal of form for:
31	Suspended floors, roofs, landings, balconies and access platforms
32	Edges of slabs and breaks in floors and walls Under 20 cm wide
33	Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
34	Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
35	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars
36	Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
37	Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
38	Looking mirror (Ornamental with spacers)
39	CP extension nipple 50mm
40	White washing with lime to give an even shade :
41	Old work (two or more coats)
42	Old work (one or more coats)
43	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
44	Distempering with 1st quality acrylic distemper (ready mixed) havingVOC content less than 50 gms/litre,two or more coats on new work ofapproved manufacturer, of required shade and colour complete as permanufacturer’s specifications
45	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
46	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.
47	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
48	15mm Cement plaster on the rough side of single or half brick wall of mix:
49	1 : 4 ( 1 cement : 4 fine sand)
50	1 : 6 ( 1 cement : 6 fine sand)
51	12mm Cement plaster of mix:
52	1 : 4 ( 1 cement : 4 coarse sand)
53	1 : 6 ( 1 cement : 6 coarse sand)
54	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
55	Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
56	Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat.
57	Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
58	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
59	PVC Handle set for cistern
60	Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
61	1 mm thick
62	2 mm thick
63	Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.
64	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work (Parkash, Suyra Make) or equivalent
65	15 mm dia. nominal bore (Medium)
66	20 mm dia. nominal bore (Medium)
67	25 mm dia. nominal bore (Medium)
68	32 mm dia. nominal bore (Medium)
69	Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) (Parkash, Suyra Make) or equivalent
70	15 mm dia. nominal bore (Medium)
71	Clearance of manholes by way of removal of slush/human excreata etc. from manholes incl. disposal of same outside premises and clearance of connecting pipes incl. rodding, watering complete.
72	Door Lock (Superior) (Godrej)
73	Providing and fixing on wall face un-plasticized Rigid PVC rain waterpipes conforming to IS: 13592 Type A including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion
74	75mm dia pipe
75	110mm dia pipe
76	150mm dia pipe
77	200mm dia pipe
78	Providing and fixing PVC pipe including / jointing with seal ring (Finolex / Supreme) of pressure @ 5.5 kg/Cm2
79	75mm dia plain bend
80	75mm dia door bend
81	75mm dia cowl
82	110mm dia plain bend
83	110mm dia door bend
84	110mm dia door Tee
85	110mm dia Tee junction
86	Reducer Tee 110 mm dia to 75mm dia
87	Cowl 110 mm dia
88	75mm dia Door Tee
89	150mm dia Plain Bend
90	150mm dia Door Bend
91	Providing and fixing PVC floor trap of Finolex / Supreme make
92	Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.
93	Orissa pattern W.C Pan of size 580x440 mm
94	Providing and fixing white vitrous china pedestal type water closet (Hindware/Cera/Parryware make) (European type W.C Pan) with 100mm PVC P&S trap incl. cutting and making good the walls and floors wherever required
95	Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :
96	White Vitreous China Wash basin size 630x450 mm with asingle 15 mm C.P. brass pillar taps
97	White Vitreous China Angle back wash basin size 600x480 mmwith single 15 mm C.P. brass pillar tap
98	Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings
99	Providing and fixing counter top wash basin white vitrous chinacomplete (Jaquar/Hindware make)
100	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively.
101	Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White
102	PVC connection for flushing cistern, wash basin, sinks etc
103	450 mm long
104	600 mm long
105	Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: White solid plastic seat with lid
106	Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 liter/6 liter (adjustable to 4 liter/8 liters), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
107	Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge
108	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
109	Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.
110	Providing and fixing of China Ware fittings (Superior Type as per the make and design specified by the Engineer-In-Charge)
111	Wash basin china ware (white) 600x470x160mm
112	Wash basin china ware size 565x435x215mm
113	Round wash basin Counter top size 545x545x185mm
114	Extended wall hung seat complete with cistern size 365x643x770mm
115	EWC with soft clearing seat cover size 360x360x680x755, S-Trap complete with
116	EWC with normal clearing seat cover size 350x480x390
117	Providing and fixing of china ware urinal partition
118	Providing and fixing of china ware urinal size 355x345x535mm
119	Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
120	Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
121	Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
122	Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931
123	Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
124	Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
125	Brass spindle for conceled stop cock
126	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:
127	Semi rigid pipe 32 mm dia
128	Flexible pipe 32 mm dia
129	Providing and fixing C.P fittings 15mm nominal bore and fixtures (Superior Type as per the make and design specified by the Engineer-In-Charge)
130	Bib cock weight not less than 690 gms
131	Short nose bib cock (Jaquar)
132	Long nose bib cock weight not less than 810 gms (JAQUAR)
133	Angle valve (Jaquar)
134	Mixer for wash basin (Jaquar)
135	Mixer for bathing (wall mixer) Jaquar
136	Swan neck left / right tap
137	C.P gratings 4\"
138	C.P gratings 6\"
139	Soap dish (Jaquar)
140	C.P. towel rod 2\"-0\"
141	C.P. towel rod 1\"-6\" (20mm dia)
142	Towel ring 200 mm dia
143	Waste coupling for wash basin 32 mm dia
144	Waste coupling for laboratory sink 50 mm dia
145	Shower with arm
146	Conceled stop cock with head
147	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge
148	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
149	610x460mm bowl depth 200mm
150	470x420mm bowl depth 178mm
151	Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete
152	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
153	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
154	Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
155	Extra for depth for manholes Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
156	Demolishing W.C platform cement concrete and disposal of unservicable material upto dumping site at ground floor road side (maximum 3\"-0\"x4\"-0\"x1\"-6\")
157	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)
158	For fixed portion. Anodized aluminum (Anodized transparent or dyed to requiredshade according to IS:1868, minimum anodic coating of grade AC 15)
159	Powder coated aluminum (minimum thickness of powder coated 50 microns)
160	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)
161	For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
162	Powder coated aluminum (minimum thickness of powder coated 50 microns)
163	Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.
164	Pre-laminated particle board with decorative lamination on both sides.
165	Repair to aluminium door shutters incl. refixing / fixtures / ACP sheets rubber gasket / aluminium beeding etc complete (Cost of ACP sheet paid separtely)
166	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
167	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in- plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness
168	Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
169	Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
170	300x16mm
171	250x16mm
172	Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
173	200x10mm
174	1500x10mm
175	100X10mm
176	Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
177	125mm
178	100mm
179	75mm
180	Polishing with melamine , chalk mitti complete
181	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).
182	Second class teak wood (30mm thick)
183	Second class teak wood (35mm thick)
184	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.
185	Particle Board 12mm thick. Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked
186	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood 35mm thick
187	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood 30mm thick
188	Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:
189	2nd class teak wood 50 x 12 mm
190	50 x 20 mm
191	Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately).
192	GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.
193	12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit
194	12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fiber conforming to IS: 2095 part-I, of size 595x595 mm, having perforation of9.7x9.7 mm at 19.4 mm c/c with center borders of 48mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
195	8 mm thick fully perforated Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/cm2, bending strength 100 kg/cm2, of size 595x595 mm, having perforation of dia. 10mm with minimum perforated area 18% with non-woven tissue on the back side, having an NRC (Noise Reduction Certificate) of 0.85, with 50 mm thick rock wool of 48 kg/cum backing.
196	Providing of water proofing treatment to the roof slab, W.C and bathrooms by Austrian technology using diamond shield and fiber mesh covered with two or more coats of specified chemical or using FOSROC, SIKA of BASF water proofing chemical. A primer coat of specified chemical to be applied before fixing / laying of fiber mesh complete
197	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
198	Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.
199	Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.
200	40mm thick with 20 mm nominal size stone aggregate
201	50 mm thick with 20mm nominal size stone aggregate
202	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.
203	Size of tile 600x600 mm
204	Size of tile 800x800 mm
205	Providing and fixing Anti-skid premium tiles on floor (thickness to be specified by the manufacturers) of Ist quality of RAK, KAJARIA make in any colour laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) incl. pointing the joints with white cement and matching pigment etc complete
206	300x300mm
207	600x600mm
208	Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigmentsetc. complete
209	Size of tile 600x600 mm
210	Size of tile 600x1200 mm
211	Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete
212	Disposal of unserviceable dismentled material / waste mulba by mechanical transportation outside Municipal limits incl. cost of loading, unloading, stacking complete (Trolly)
213	Grinding and polishing old terrazo flooring / skirting with floor polish of specified brand for smooth finishing incl. disposal of waste material of griding / polishing from site of work to dumping site at ground floor
214	Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels
215	Granite of any colour or shade (Area of slab over 0.5 sqm) 16mm thick
216	18mm thick
217	Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (Grantine work)
218	Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)
219	Providing and fixing M.S wire guage to old wood shutters / steel shutters incl. removing and fitting of shutters complete
220	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.
221	Fixed to steel windows by welding
222	Fixed to openings / wooden frames with rawl plugs screws etc
223	Providing and fixing PVC Panelling in walls 8 to 10 mm thick incl. all fittings and fixtures complete (wall affair or any equivalent make)
224	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
225	15mm nominal bore
226	20mm nominal bore
227	Providing 1 ¼ “ wooden moulded beading to the ceiling incl. cost of nails, wastage etc complete
228	Providing and fixing 1\" wooden gola to the ceiling incl. cost of nails, wastage etc complete
229	Providing fency knoob to the cupboard shutters complete job
230	Providing and fixing 19mm thick wooden board shutters to cabnit incl. M.S hinges and screws complete
231	Providing and fixing hand held jet sprayer
232	Providing and fixing PVC bend 40mm dia (Superior)
233	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood
234	Dismantling aluminum / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge.
235	Providing and fixing Anodized aluminum grill (Anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved Anodized aluminum standard section around the opening, all complete as epr requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment)
236	Aluminium sheet for doors 1mm thick
237	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
238	Hot finished welded type tubes
239	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
240	15mm nominal outer dia pipes
241	20mm nominal outer dia pipes
242	25mm nominal outer dia pipes
243	Providing and fixing 6 mm water proof ply complete job
244	Providing and fixing 12 mm water proof ply complete job
245	Providing and fixing 19 mm water proof ply complete job
246	Providing and fixing of 1.0mm thick sunmica incl. cutting, wastage fevicol, nails carriage etc complete item (Virgo, Amulya or equivalent make)
247	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
248	25 mm nominal bore
249	32 mm nominal bore
250	40 mm nominal bore
251	50 mm nominal bore
252	Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal / vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required
253	0.63 mm thick with zinc coating not less than 275 gram/m2
254	Extra for straight cutting in C.G.S. sheet roofing for making opening of area exceeding 40sq.decimetre for chimney stacks, sky light etc
255	0.80 mm/0.63 mm/0.50 mm thick
256	Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters
257	With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws (35mm thick)
258	Supply and installation of Armstrong Medintech Plus PUR homogenous vinyl sheet flooring , Inc, 2 metre wide and overall thickness of 2mm. The thickness of wear layer would be 2mm. The product should be homogeneous and single layered. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC with TRUESHILED technology, Plasticizers without DOP, Urethane, colour pigments and filler calendered to from a sheet, colour and pattern details shall be dispersed throughout the thickness of the wear layer, Medintech Plus shall conform to group \"I\" wear resistance as per EN 649. Clean room certified with class \"A\" as per ASTMF5100. Flammability resistance of class BA-sl as per GB8624-2006, Dynamic coeffcient of friction of class DS as per EN 13893, Thermal resistance of 0.072m2K/W as per EN 12667, Thermal conductivity of 0.071W/mK as per EN12524, impact sound reduction of 3dB as per ISO 10140. Slip resistance of class R9 as peDIN 51130. Residual indentation of 0.03mm as per GB/T 4085-2005. Color fastness rating of 6 as per ISO 105-B02, total weight being 2.8kg/m2 as per EN430. The product shall be suitable for applications in class 23/34/43 areas as per EN685. Product shall exhibit antistatic behaviour, resistance to bacteria, resistance to chemical, resistance to staining suitablity to castor chair. The product shall be floor score certified with no SVHC content published by European Chemicals Agency (REACH), Product shall contribute to LEED points under Indoor environment quality (LEED EQ) and material and resource (LEED MR) category
259	Providing and fixing of brass phase for taps / pillar cocks (heavy duty)
260	Providing and fixing of door mats of standard make
261	(3\"-0\"x1\"-6\")
262	(2\"-0\"x1\"-6\")
263	Providing and fixing cupboards incl. frame of 2nd class deodar wood 19mm thick partical board with decorative shutters incl. internal box of 19mm partical board complete with paiting with all fittings and fixtures
264	Providing and fixing wallpaper of required colour, shade and design of standard make as directed by the Engineer -In-Charge
265	Providing and fixing acrylic name plate (writing on both sides)
266	Supply of Labour (Mazdoor) for various day to day works as per directions of engineer in charge
267	Supply of CARPANTER for various day to day works as per directions of engineer in charge
268	Supply of PLUMBER for various day to day works as per directions of engineer in charge
269	Supply of SWEEPER for various day to day works as per directions of engineer in charge
270	Supply of technican
271	Supply of mason 1st class
272	Supply of welder
273	Supply of portable welding machine and for repair to various steel works incl. carriage
274	Supply of portable generator set incl. carriage
275	Cleaning of PVC overhead water tanks by engagingMachines as per directions of engineer in charge
276	Providing & fixing of Multi Locks to Cup-boards (Godrej)
277	Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete
278	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
279	Providing and fixing ball bearing for rolling shutters.
280	Providing and fixing of PVC sheet (2mm thick)
281	Providing and fixing of 19mm thick pre-laminated board in paneling over wooden frame including removing of old damaged paneling and anti-termiting the same (complete job) laminated 8mm thick AC4 water resistant
282	Providing and fixing painting wire gauge shutters, comprising as per window frame of built up MS sections 12mm x 50mm rectangular tube with wire guage shutter made of Z-section including hinges, riveted with frame of 20mm x 3mm flat iron complete job (sample window available at High Court building) including priming and painting as per directions of engineer in charge.
283	P/F of Louvers on the wall surface incl. base preparation with necessary items, fixtures incl. loading and unloading complete.
284	P/F of UV Sheet of glossy pattern on the wall complete
285	Engaging trollies for disposal of mulba from construction site to the dumping yard beyond municipal limits
286	Supplying and stacking at site Good Earth
287	Supplying and stacking at site dump manure from approved source including carriage complete (manure measured in stacks will be reduced by 8% for payment) Screened through sieve of I.S. designation 4.75 mm
288	Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately)
289	Mixing earth and sludge or manure in proportion specified or directed by officer in charge.
290	Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 5 cm apart in either direction
291	Providing and fixing of wooden flooring of specified shade and brand as per directions of engineer in charge including base coat of foam complete job.
292	Providing and fixing wooden profile Grade A to wooden flooring of specified brand as per direction of enigneer in charge
293	Grinding and polishing old Kota Stone / Chips flooring surface with floor polish of specified brand.
294	Finishing walls with Acrylic smooth exterior paint of required shade: Suraksha
295	Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface)
296	Old work (one or more coats applied @ 0.90 liters/ 10sqm)
297	Providing / fixing polycorbonate sheet including wastage of 02mm thick (50 Micron) complete job
298	Providing / fixing polycorbonate sheet including wastage of 10mm thick (50 Micron) complete job
299	Providing and fixing UV stabilized fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts and nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick flat
300	Providing and fixing Brass Name Plate written on both side of Hon\"ble Justices. (complete) 2\"-6\" x3\"-3\"
301	Proving / fixing of pre-laminated board partition fixed on both sides, fixed over wooden frame of Ist class kail wood complete job including painting of cupboards etc.
302	Providing and Laying 80mm thick factory made antiskid, anti glazed PCC interlocking paver blocks of M-40 design mix as per IS: 15658: 2006 (Avg. compressive strength of 8 paver blocks shall be minimum 47.2 N/mm2 minimum thickness of wearing layer is 6mm, max abrasion resistance 2mm, maximum water absorption of 3 units is 6% by mass) made by high quality paver blocks making machine with high level of compaction and vibration and of approved size and shape laid in required colour and pattern (pigment used shall not be more than 10% of weight of cement used in wearing course layer) and including 50mm (+5mm) thick compacted bed of naturally occuring, clean, well graded, sharp coarse sand (passing 4.75mm sieve) of uniform moisture content 4% to 8% at the time of spreading. Paver units should be placed with the help of spacer (2mm, 3mm wide) of uncompacted sand cutting machine, filling the spaces between 25mm and 50mm wide concrete having minimum 1:1:2 cement : sand : 20mm crushed stone aggregate mix. After laying paver blocks they shall be compacted with high frequency, low amplitude mechanical flat plate vibrator having plate area sufficient to cover a minimum of 12 paving units, after compaction joint filling by sand shall be spread over the pavement (Joint filling sand shall pass a 2.36 mm No. 8 sleve) an complete as per direction of Engineer-in-charge
303	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (12\"x18\")
304	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
305	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
306	Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Medium shade using 50% white cement and 50% ordinary cement.
307	Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown
308	Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm
309	Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
310	Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of tile 600x600 mm
311	Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
312	Providing and fixing of PVC covers for PVC water storage tanks
313	Providing and fixing of blind for windows incl. all fixtures and fittings and necessary arrangements etc complete job (superior quality)
314	Vertical blind
315	Roller blind
316	Zebra blind
317	Repairs to existing blinds
318	Providing and fixing of curtains of standard size incl. stitching, rings etc complete job (superior quality) 3\"-0\"x8\"-0\"
319	Providing and fixing flex board complete with hollow section M.S pipe frame work complete job
320	Buttiny / grinding of stainless steel railing by way of buffing machine
321	Providing and fixing of honour board/ name plate made of wooden board / ply / acrylic sheet incl. writing complete job.
322	Providing and fixing of S/S side steel brackets
323	Providing and fixing of S/S side finners
324	Finishing walls with textured exterior paint of required shade:Old work (two or more coats on existing cement paint surface applied @ 3.28 ltr/10sqm)
325	Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion
326	75 mm diametre
327	110 mm diametre
328	Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete:
329	40 mm
330	50 mm
331	Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm
332	With 2nd class teak wood beading 62x19 mm
333	With 12 mm mild steel U beading
334	Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete
335	125 mm
336	Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete
337	Twin rubber stopper
338	Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete
339	Triple strip (Vertical type)
340	Providing and fixing of telescopic channel 16\" complete set with necessary screws / arrangement (Godrej, Link)
341	Providing and fixing of door seal with necessary screws etc complete
342	Providing and fixing of Door lock handle
343	Providing and fixing of ACP sheet incl. cutting, wastage with necessary nails etc complete (Bettech / VIT / Interia) make
344	Providing and fixing of S/S curtain rod pipe with side brackets and finners complete
345	Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete
346	20 mm dia
347	25 mm dia
348	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
349	Providing and fixing of S/S Honour board / Name Plate incl. writing, engraving, painting etc complete item
350	Providing and fixing of Brass Honour board / Name Plate incl. writing, engraving, painting etc complete item
351	Providing and fixing of A grade wallpaper laid on smooth surface of wall with necessary adhesive. Selection of color, material and thickness and quality as per the directions of consultant/ Engineer in charge.
352	Providing and fixing of 4mm thick Charcoal sheet press on WPC board/ ACP Sheet with adhesive. Complete job. Material and thickness, quality as per the consultant/ Engineer in charge.
353	Providing and applying Total Excel paint one or more coat on old surface. Complete.
354	Providing and applying Beauty gold Interior Emulsion paint one or more coat on old surface. Complete.
355	Providing and fixing of 10mm thick Tougnened glass. Complete.
356	Providing and fixing of Granite Honour board of size 2\"x3\" incl. writing, engraving, painting etc complete item
357	Providing and fixing of Filmon the centre oftoughened glass
358	Providing and fixing of Ornamental film onthetoughened glass as per the required design and pattern
359	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately):First class teak wood
360	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class Deodar wood
361	Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm
362	Carriage of material by mechanical transport incl. loading / unloading, stacking at site of work:-
363	Stone Aggregate above 40mm nominal size (average lead 5.00 kms)
364	Stone Aggregate below 40mm nominal size (average lead 5.00 kms)
365	Sand (average lead 50.00 kms)
366	Bricks (average lead 70.00 kms)
367	Providing and fixing of Jaquar Shower Enclouser of size 4\"
368	Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable GI box earthing the point with 1.5 sq. mmFRLS PVC insulated copper conductor single core cable etc as required (Group-A)
369	Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. (Group-A)
370	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc.as required.
371	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps. modular socket outlet and 15/16 amps modular switch connection etc. as required.
372	Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\" curve including connections, painting etc. as required.
373	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
374	Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
375	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
376	Supplying and drawing followingsizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC conduit as required.
377	1 x 1.5 sq. mm
378	3 x 2.5 sq. mm
379	3 x 4 sq. mm
380	Wiring for circuit/ sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.
381	4 X 6 sq. mm + 2 X 6 sq. mm earth wire
382	4 x 10 sq. mm + 2 x 6 sq. mm earth wire
383	Supplying and drawing following pair 0.5 mm dia FRLS PVCinsulated annealed copper conductor, unarmored telephonecable in the existing surface/ recessed steel/ PVC conduit as
384	1 Pair
385	2 Pair
386	4 Pair
387	Supplying and fixing of ceiling fan offollowingsweep with 2.25 mfd condenser and 1\"-6\" down rod on the existing fan hook with necessary connection from ceiling rose to fan using twin core copper wire.
388	BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing(i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge.1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 )
389	Supplying and fixing of following sizes Transair exhaust fan with metal blade complete set on existing holes on wall with necessary connection from ceiling rose to fan.
390	300mm/12\" sweep exhust fan
391	Supplying & fixing of following way single pole and netural, sheet steel, MCB distribution board, 240 volts, on surface/ recess complete with tinned copper busbar netural busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.
392	6 way (Double door)
393	8 way(Double door )
394	Supplying and fixing of following sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. (ISI Make).
395	25 mm
396	IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuitprotection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge.20/22 watt LED 4 feetwith min. lumen output (2000- 2200) lm
397	LED Batten Tube fitting 600mm size 10/11 watt
398	2x2 Recess Led Panel 595mmX595mm 36 W+/- 1W,Recess mountedfixture with HET PMMAdiffuser with minimum system lumen efficacy of 110 lm/W and minimum 3900 lumens withCRCA housingwith APFC constant Current driver for proper driving of LEDs and P.F.>0.95 with THD<10% ,CRI 80.The LED withlife of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of 5700K- 6500K with CRI of minimum 80. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 3kV. Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab.
399	Mirror light LED fitting with 9/11W LED lamp
400	Providing and fixing of LED Lamp.
401	9W
402	12W
403	15W
404	18W
405	Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass coverand secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its ownin house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.
406	High Power LED Flood Light Minimum lumen output 8700 lm
407	Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / Sqaure SMD Mid Power(15-18 watt) LED Downlight with power coated die-cast aluminum housing with UV Stabilized non yellowish Diffuser with BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% . System Lumen efficacy of ≥ 110 lm / watt, THD < 10 % , Pf.≥0.95, CRI >80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.).Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as perapproved by Engineer in charge.
408	Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
409	1 or 2 Module (75mm x 75mm)
410	3 Module (100mm x 75mm)
411	4 Module (125mm x 75mm)
412	6 Module (200mm x 75mm)
413	8 Module (125mm x125mm)
414	12 Module ( 200mm x 150mm)
415	Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
416	1 or 2 Module
417	3 Module
418	4 Module
419	6 Module
420	8 Module
421	12 Module
422	Suplying and fixing following modular switch/ socket on the existing modular plate & switch box inculding connection but excluding modular plate etc. as required.
423	5/6 amps switch
424	15/16 amp switch
425	3 pin 5/6 amp socket outlet
426	6 pin 15/16 socket outlet
427	Telephone socket outlet
428	TV Antenna socket outlet
429	Bell push
430	Servicing of the Geyser etc. as required.
431	Supplying and replacement of the suitable size and rating of the following in the storage water heater and making the geyser in good working condition. (Make as per the gyser installed)
432	Heating Element
433	Thermostat with control
434	Replacement of Assembly complete job
435	Supplying and fixing of following rating 240/415 volts \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
436	Single pole upto 32 amp.
437	SPN 63 Amp
438	TPN 40 Amp
439	TPN 63 Amp
440	Supplying & laying ofPVC insulated and PVC sheathed/ XLPE Aluminium power cable of 1.1 KV grade of following size on surfaces/ direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (Armoured cable)
441	70 sq. mm 3.5 core
442	95 sq. mm 3.5 core
443	120 sq. mm 3.5 core
444	Supplying and fixing of twin core aluminium cable all along the wall surface unarmoured.
445	25 sq.mm
446	35 sq.mm
447	Labour charge for electrician
448	Labour charge for Helperelectrician
449	Supplying & Drawing of Co- axial TV cable RG-6 grade, 0.7 mm solid copper conductor.
450	Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and PatchPanels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as pre approved by Engineer in charge.
451	Supplying ofRemote Bells
452	Supplying & fixing of following PVC Gang Box.
453	One way
454	Two way
455	1 + 1 way
456	3 + 1 way
457	4 + 1 way
458	6 + 1 way
459	1 + 1 way (Power)
460	Supplying & fixing of Electrical AccessoriesPVC Casing and Caping (Batten).
461	Casing Caping 1\"
462	Casing Caping 3/4\"
463	Deep Box
464	Fan Box
465	Conceeled Box
466	Junction Box (Metal)
467	Supplying and fixing ofPhenolic Laminated Sheet 9\" x 11\"including cutting the space for switches/socket etc.
468	Supplying and fixing of Phenolic Laminated Sheet 9\" x 6\" including cutting the space for switches/socket etc.
469	Supplying and fixing of Phenolic Laminated Sheet 4\" x 4\" including cutting the space for switches/socket etc.
470	Supplying and fixing of Phenolic Laminated Sheet 11\" x 13\" including cutting the space for switches/socket etc.

Also Visit

Tenders

Jammu And Kashmir Tenders

Construction Tenders

Road Construction Tenders

Paver Blocking Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Day To Day Requirements Of Sanitary, Hardware, Civil, Electrical Items At Tara Niwas Of Hospitality And Protocol Department At Udhampur For The Year 2024-25., Udhampur-Jammu And Kashmir

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Day To Day Requirements Of Sanitary, Hardware, Civil, Electrical Items At Tara Niwas Of Hospitality And Protocol Department At Udhampur For The Year 2024-25., Udhampur-Jammu And Kashmir

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us