Tender For Formation Of Interlocking Blocks At Iyyapillai Garden 1St Street ( Part ) In Division-13, Unit-03, Zone-01. ( Under Ward Councillor Fund), Thiruvottiyur-Tamil Nadu
TDR : 46738884
Tender Notice
BOQ
Expired
Thiruvottiyur
Tamil Nadu
Tender For Formation Of Interlocking Blocks At Iyyapillai Garden 1St Street ( Part ) In Division-13, Unit-03, Zone-01. ( Under Ward Councillor Fund)
Name of Work: Formation of Interlocking Blocks at Iyyapillai Garden 1st Street ( Part ) in Division-13, Unit-03, Zone-01. ( Under Ward Councillor Fund)
Sl. No.
Item Description
1
Dismantling plain cement concrete work and clearing the debris etc., complete.
2
Carting away the surplus earth and debris to a lead of 10km.including Loading, unloading and dumping in the Corporation Land as directed during theexecution.
3
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 (This Rate Is Applicable Only IfWork Is Done During Night)
4
Supplying And Fixing Interlocking Blocks Against Available Edge Restraints 80 mm Thick of Approved Design And Pattern of Strength 40 N/Sq.m.10 mm Iss Metal With MinimumCement Content As Applicable To M 40 Grade Concrete As Per Is-456-2000Manufactures By Mechanical Or Hydraulic Machine Using Vibro-Compaction Process And Laid Over 50 mm Thick Laying Course (Bedding) Crushed Stone Sand (M Sand) Well Compacted By Plate Compactor With A Joint Width of 2 mm To 5 mm Including Filling of All Joints With Crushed Stone Sand (M Sand) And Compacting The Paved Surface With Plate Compactor Two Or Three Times Until All The Unit-To-Unit Joints Are Completely Filled With Crushed Stone Sand (M Sand) And Trimming The Edges Neatly Including All Labour Charges And Plate Compactor Charges Etc.Complete(Cost Inclusive of Crushed Stone Sand (M Sand)).
5
Raising Or Lowering 45 cm.(or) 60 cm. Dia Cast Iron Man Hole Frames And Door Including Brick Work Second Class Table Boulded (Chamber Burnt) Brick of Size 9 X 4.3/8\"X2.3/4\" In cm. 1:3 With C.C 1:2:4 Using 20mm Irc Size B.G. Metal And Rendering Smooth The Top Surface With Cement Etc.Complete
6
Construction of cast -in- situ Silt Catch Pit Rain...ith 40mm HBG metal with 200mmdia pvc pipe 6kg/cm2
7
Supplying and Fixing of Digitally Printed Retroreflective Single Arrow Sign board of size 1595mm x 900mm made of Type XI grade cube corner micro prismatic grade sheeting confirming to IRC 67-2012 as per ASTMD-4956-09 Specifications, Digitally Printed using Latex Printer for Traffic Colour logos/text and laminated with UV Resistant clear electro-cut film and applied to proper prepared sign substrate made of 4mm thick Aluminum Composite Material (ACM) with 0.25mm aluminium skin thick on both sides and back support frame angle of 25mm x 25mmx3mm Supported by 32NB, 2.7mm Thick Stainless steel pipe all round in 304 grade and 2 nos. of vertical posts of 65NB, 3.04mm thick stainless steel pipe of 304 grade firmly fixed to the found by means of properly designed foundation of size 300 mm x 300 mm x 450 mm with M15 Grade cement concrete and the item shall include earthwork excavation, cost of materials, loading, unloading, lead, lift, transportation etc, complete as per approved template.The signs shall be manufactured using a system of matched components of reflective sheeting and overlay films and digital inks manufactured and supplied by the reflective sheeting manufacturer .Digitally printed traffic colour (red, blue, green, yellow, orange and brown) areas on white sheeting shall not be having less than 70 percent of the value of the coefficient of retro reflection established for its colour and type of sheeting as given in Table6.9 of IRC 67-2012.The coefficient of retro reflection after the stipulated warranty period shall be minimum 80 percent of the initial value of the printed sign (initial value shall be minimum 70% of the values given in table 6.9 of IRC 67-2012). Match component system warranty for the components like retro-reflective sheeting, overlay films and digital inks shall be provided by the manufacturer The Retro reflective sheeting shall be covered under 10 years warranty issued for field performance and certified copy of completed three years outdoor exposure report shall be obtained by the engineer-in-charge. The warranty shall be inclusive of digitally printed logos/text/legends and their bonding to the retro-reflective sheeting (as per MoRT&H Specification No.801). The latex printer used for digital printing should be used with Inks of low VOC emission and should have Greenguard, eco logo certificate as per UL 2801 Standards. The warranty & Test certificates shall be obtained from the retro-reflective sheeting manufacturer by the contractor and shall be submitted to engineer-in-charge.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
