Tender For Repair And Maintenance Work Of Judicial Qtr J/3/2 At Nathdwara
Tender Value
2.17 Lakhs
Estimated cost
Bid Submission
26 Dec 2024
0 days left
EMD
4340
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nathdwara → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair And Maintenance Work Of Judicial Qtr J/3/2 At Nathdwara
BOQ
| Sl. No. | Item Description |
| 1 | Chequerred precast cement concrete tiles 22 mm thick infootpath & courtyard jointed with neat cement slurry mixedwith pigment to match the shade of tiles including rubbingand cleaning etc. complete on 20 mm thick bed of cementmortar 1:4 (1 cement : 4 coarse sand) Dark shade using ordinary cement |
| 2 | Providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excludingthe cost of centering and shuttering - All work up to plinthlevel. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate20mm nominal size). |
| 3 | 120cm. high fencing with angle iron posts 50x50x6mm. placedat every 3 Mtr. apart 30cm. in ground embedded in cementconcrete 1:3:6 (30x30x45cm) corner & every tenth posts to bestrutted with 50x50x6mm angle iron provided with fourhorizontal lines and two diagonals of black barbed wirebetween two posts fitted and fixed with G.I. staple includingearth work in excavation etc. complete. |
| 4 | Random Rubble stone masonry with hard stone insuperstructure above plinth level and upto five level above30cm. thick walls in Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 5 | Brick work with F.P.S. bricks of class designation 75 insuperstructure above plinth level upto floor V level in allshapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 6 | Finishing walls with Acrylic Smooth exterior paint of requiredshade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm overand including base coat of water proofing cement paint applied@ 2.20 kg/ 10 sqm ) |
| 7 | Wall painting with plastic emulsion paint of approved brandand manufacture to give an even shade including allscaffolding: Two or more coats on new work including prepartion of basewith primer, putty, lippy etc complete in all respect. |
| 8 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade : One or more coats on old work |
| 9 | Repairs to plaster of thickness 12mm to 20mm in patches ofarea 2.5 sq. metres and under including cutting the patch inproper shape, raking out joints and preparing and plasteringthe surface of the walls complete including disposal of rubbishto the dumping ground within 50 m lead With cement mortar1 :4 ( 1 cement : 4 coarse sand) |
| 10 | Plaster on new surface on walls in cement sand mortar 1:6including racking of joint etc. complete fine finish : 20mm thick. |
| 11 | Providing and fixing external grade board solid core singleleaf flush door shutters ISI 2202-67 marked using Phenolformal dehyderesin in glue both sides with approved steelfittings complete as per annexure \"A\" : 30 mm thick .Commercial Veneer both side |
| 12 | Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 5 mm |
| 13 | Repair of door, window shutters including cost ofmaterial and labour for change of damaged : panel by(ii) Wire Gauge 14 mesh x 24 gauge |
| 14 | Providing and fixing Square bars or other flat welded towindow, ventilatiors etc. |
| 15 | Rough Chisel dressed Sand stone 35 mm thick flooring ofapproved shade set over 20mm thick base of cement mortar1:6 (1 cement : 6 coarse sand) and pointing with cement sandmortar 1:3 with pigment to match the shade of stone with jointthickness up to 15 mm complete in all respects : Red sand stone (Karauli stone) |
| 16 | Structural steel work in single section fixed with or withoutconnecting plate including cutting, hoisting ( height upto 10m), fixing in position and applying a priming coat of approvedsteel primer all complete |
| 17 | Providing & fixing UV stabilised fiberglass reinforced plasticsheet roofing upto any pitch including fixing with polymercoated „J‟ or „L‟ hooks, bolts & nuts 8mm dia. G.Iplain/bitumen washers complete but excluding the cost ofpurlins, rafters, trusses etc. The sheets shall be manufacturedout of 2400 TEX panel rovigs incorporating minimum 0.3%Ultra-voilet stabiliser in resin system under approximately2400 psi and hot cured. They shall be of uniformpigmentation and thickness without air pockets and shallconfoim to IS 10192 and IS 12866.The sheets shall beopaque or translucent, clear or pigmented, textured or smoothas specified 2.0mm thick (Wt. 3.3 Kg./Mtr. Sq.) |
AI Tender Summary
Tender Timeline
Dec 16, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedDec 26, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 27, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender