|
| 1 | Supply of Lawn Mower:-Specification:-Type of Machine Walk behind Lawn Mowers, Power Source Petrol Engine, Engine displacement 224 CC, Start Type Recoil / Pull StartSpeed control Variable Speed, Drive Type All Wheel DriveBlade style Rotary Type, Blade Engagement Electromagnetic Cut Width (mm) 525 to 549, Minimum Cut Height 20 millimeterMaximum Cut Height 80 millimeter, Blades Hardened steelNumber of Blades 1, Number of positions for cut-height adjustment 6, Number of levers for Cut-height adjustment: Single leverNumber of Wheels 4, Front Wheel Size 203 millimeterRear Wheel Size 250 millimeter, Wheel Tyres PneumaticIf yes, Grass Catcher/Collector/Bag Volume 70 liter\"Engine Power Rating (Watt)\" 4000 to 4999 Engine Fuel Tank Capacity-1.4 Ltr. |
| 2 | TELESCOPIC PETROL OPERATED POLE PRUNEREngine: Single Cylinder, 2 Stroke, Air cooled OnlyDisplacement: Should be between 25-30 CC POWER OUTPUT: Should be minimum 1.2 HPWeight (Dry without cutting attachment & fuel): Should not be more than 7.5 KgFuel tank capacity (ml): Should be minimum 400mlChain oil capacity (ml): Must have minimum 200 ml. Clutch shoe linining should be metal only.Guide bar length: Minimum 30cmGuide bar and Chain: Should have same manufacture only.Chain Type: Every drive link need groove & small oil holes for better Lubrication Saw chain pitch should be 1/4\" OR 3/8Picco only and drive link thickness must have1.1 mm or 1.3 mm. Max. output shaft speed (RPM): Should be minimum 8000 RPM at chain sprocket.Equipment total Length with guide bar and chain (cm): Should be minimum220 cm-compressed & total length of equipment-minimum 350 Cm-Extended.Sound Pressure Level (Db/A): Should not be more than 95 Db(A)Vibration Measurement m/s2 at control handle - Extended Position: Should notbe more than 5.5 m/s2Certification: Must have TUV certification with test standard EN ISO 11680 |
| 3 | PETROL OPERATED CHAIN SAWEngine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY, Displacement: 45.4CCPOWER OUTPUT: 2.3Kw. 3.0 HPMax. engine speed (with guide bar & chain) At least 12500 RPM,Carburetor: Diaphragm type & compensator technology. Fuel tank capacity: Should be minimum 450 ml.Dry weight without cutting attachment ): Should not be more than 5.0 KG,Clutch: Clutch shoe LININING metal ONLY.Guide Bar Design: Should be Rollomatic type.Guide Bar Length: Guide bar length must have 50 cm/20 inch,Guide bar and Chain: Should have same manufacture only, Chain Type: Every drive link require groove & small oil receiver hole for betterLubrication 0.325 inch Pitch & 1.6 mm thickness only.chain Lubrication System: Fully automatic speed controlled rotary oil pump Chain oil tank capacity: Should be minimum 200 ml. Oil Pump Drive: Should have direct drive from Crankshaft & Oil Pump flow adjustableMaster Lever Control: Must have all operation in One Hand, Chock, throttle, Acceleration. switch off.Guaranteed Sound power level: Should not be more than 115 Db(A) Maximum chain velocity to I50 11681: Should be minimum 28 mis Certification: product should have valid DPLF certificate with test standard EN ISO 11681. |
| 4 | PETROL OPERATED BRUSH CUTTEREngine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLYENGINE DISPLACEMENT: 40.2CCPower Output: 2Kw/2.7HPMax Output shaft speed at cutting attachment: Should be minimum 9000 RPMCARBURETOR: Diaphragm with compensator technology. Fuel Tank Capacity: Minimum 600 ml.WEIGHT (Dry, without cutting attachment & deflector): Should not be more than 7.5 KgCLUTCH: Centrifugal Type, Clutch Shoe Support base & lining Metal Only.MULTI FUNCTION HANDLE: Should have Acceleration ON/off Switch at righthandle BRUSHCUTTER HARNESS: Should be double shoulder harness only.ANTI VIBRATION SYSTEM: Must have 4-point aniti vibration system.Vibration Level in m/s2 at right handle: Should not be more than 2.5 m/s2Sound Pressure Level Db(A): Should not be more than 105 dB(A)Drive shaft design: Must have drive shaft ends square design type only.Certification: Must have valid EN Certification |
| 5 | Tri-Cycle Frame double pipe (KW/Neelam/Surpal/UD/arapn) make top pipe-2 Nos. 25 mm dia down pipes 2 nos. 25mm dia 25mm dia) fitted with Angle (40mmx40mmx5mm) of approved brand for support of Chassis (1Number)Handle Bar (Neelam/Hercules/Atlas/KW/arpan) (1Number)Pedal set (Neelam/KW/atlas/Hat/arpan) (1Number)Chain (Hat/Metro/Rawlesh/neelam/arpan) (1Number)Crank (Swarna/Hat/KW/neelam/arpan) (1 Number) Free Wheel 22 teeth (Hero/Avon/BM) (1 Number), Free Wheel 22 teeth (Hero/Avon/BM) (1 Number), Axle (4ft.) (SWW/KW) (1 Number) Bell (1 Number)Fork (Chimta) (Neelam/Atlas/Hero/KW/CL/arpan) (1Number)Saddle (Seat) (1Number) Mud Guard Black (Sunder) (1Number), Front Brake Set (Supreme/Ashoka) (1 Number), Bearing (ABC/NBC/SKF) (1Number), Front Hub (1Number), Back Hub (SM/SNM) (1Number), Chain Cover (Sunder) (1Number) Lock (1Number), Lock (1Number)Front Bumper (1Number), Bearing Bush (1Number), Bearing Patti (3Numbers), Bearing Clip (2Numbers), Frame Lakkad (1Number), Ghori (1Number), Dhela Kamani (1Number), Patra Pati (2 Numbers)Chedia Naka (1Number), SeatTan (1Number), Including all other accessories required to assemble the Tri-Cycle Rickshaw, WHEELS Front RIM:- RIM(1.50x28) with 64 Nos. Spokes, Honda/Vasavi/Chaina/Somini/Dhil/Raja/cs/avro) (1number), Front Tyre:-22Ply (1.50x28) (Heavy Duty) , Ralson/Metro/International/National/HUNDUSTAN) (Number)Front Tube:- (Metro/International/National/HINDUSTAN) (1Number) Rear/RIM - Motor Cycle RIM (2.75x18) with 16 Nos. Spokes of 12mm (Hero Honda/SB Size/HINDUSTAN) (2Numbers) Rear Tyre:- Tyre No. 2.75x18 of (Dunlop/Bedrock/Stone/HUNDUSTAN) with tube (2Numbers) BODYOpen Top MILD STEEL container, Size 1200x900x750mm. The Rear daala hinged Bottom made of MS Sheet 2 mm, Sides and dalla made of 1.5 mm MS Sheet Angle Bottom 30x30x3 Angle top 25x25x3,Flat support 25x3 Tolerance on all dimension ±5% PAINTING Complete body will be painted Synthetic enamel paint in side and all side with double coated and also letter writing with paint, asper directions of Officer-in-Charge |
| 6 | Synthetic enamel paint in all shades except black or chocolate shade Green Color |
| 7 | Synthetic enamel paint in all shades except black or chocolate shade Yellow Color |
| 8 | Synthetic enamel paint in all shades except black or chocolate shade Red Color |
| 9 | Synthetic enamel paint in all shades except black or chocolate shade White Color |
| 10 | Synthetic enamel paint in black or chocolate shade Black Color |
| 11 | Supply of 1\" PVC Pipe with nylon braided in good quality as per direction of officer in charge |
