|
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRD Specification Clause 201.By Mechenical Means.In area of thorny jungle. |
| 2 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 3 | Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRD Specification Clause 302.3 |
| 4 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 5 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per MoRD Specification Clause 301.5 |
| 6 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 7 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per MoRD Specification Clause 401.By Mix in Place Method.For Grading IIIMaterial |
| 8 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 9 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing thematerial with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, layingin uniform layers in sub-base/base course on a well prepared sub-base and compacting with smoothwheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and MoRD Specification Clause 406.By Mechanical Means with with 1 km lead. |
| 10 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 11 | Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRD specification Clause 1906. |
| 12 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 13 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRD Specification Clause 502 |
| 14 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 15 | Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per MoRD Specification Clause 503. |
| 16 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 17 | Providing and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per Table 500.4 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per MoRD Specification Clause 504.Bitumen (VG-30) |
| 18 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 19 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using Viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing of agregate and Plasting waste cutting in a hotmix plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRD Specification Clause 508. Case - IIBy Mechanical Means Bitumen (VG-30) |
| 20 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 21 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRD Specification Clause 510 By Mechanical Means.Case-II Type B Bitumen (VG-30) |
| 22 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 23 | Providingandfixingofretro-reflectorisedcautionary,mandatoryand informatorysignasperIRC:67madeofencapsulatedlenstypereflective sheetingvideClause1701.2.3,fixedoveraluminiumsheeting,1.5mmthick supportedonGIpipe50mmdiafirmlyfixedtothegroundbymeansof properly designed foundation with M-15 grade cement concrete 450 mm x 450 mmx600mm,600mmbelowgroundlevelasperdrawingsandMoRD Specification Clause 1701 600 mm equilateral triangle |
| 24 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 25 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 26 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 27 | Providing and fixing of PMGSY logo with definition plate (as per MORD design/drawing) 2mm thick MS plate framed to angle Iron 40x40x6mmincluding orange luminous colour paint on logo, size of diamand plate 600x600mm definition plate 900x250mm supported on MS post of angle Iron of size 65x65x6mm, 3m long stove enameled paint with hold fastfirmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRD Specification Clause 1700 |
| 28 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 29 | Providing and Erecting typical Maintenance information Board as per approved drawing & specification of MORD made of MS sheet of 1.6 mm thick of size 900mm x 1500mm stiffend by angle iron 25mmx25mm x 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete M-15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings & as directed by Engineering incharge. All MS will be stove anmeled on both side lettering. Figuring and border will be with ready mixed synthethic enamel paint of superior quality in required shade and colour etc complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per MoRD Specification. |
| 30 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 31 | Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MoRD Specification Clause 1703 |
| 32 | Ordinary Kilometer Stone (Precast) Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 33 | 200 m stone (precast) Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 34 | Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160\" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. |
| 35 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 36 | Direction and place identification signs more than 0.90 sqm sign boardProviding and erecting direction and place identification retro-reflectorisedsignasperIRC:67madeofencapsulatedlenstype reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thickwith areaexceeding 0.9 sqm supported on diaGIPipefirmlyfixedtothegroundbymeansofproperlydesigned foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and MoRD Specification Clause 1701 |
| 37 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 38 | Construction of Foundation / Inaugration Pedastal in 23 cm thick Brick masonry in CM 1:4 of size 1.20m x 1.80m above ground level with adequate foundation including providing and fixing of Granite stone of size 0.75m x0.60m with engraving letters and figures,cement plaster,white washing etc. complete as per direction of Engineer in charge. |
| 39 | Upgradation of Ramsinghpur-Gharsana road Km 12/500 to 4 KAM Km 0/0 to 3/500 |
| 40 | Total Estimated Cost of Construction Work (Amount Without GST) |
| 41 | Routine Maintenance after Completion of Construction Work |
| 42 | For 1st Year (0.68%) |
| 43 | For 2nd Year (0.87%) |
| 44 | For 3rd Year (1.12%) |
| 45 | For 4th Year (1.31%) |
| 46 | For 5th Year (1.52%) |
| 47 | Total Estimated Cost of Maintenance Work for 5 Years (With GST) |
| 48 | Note :-GST shall be paid extra as per SBD Section 4 Clause 41.1 |
