Repair And Renovation Repair An Renovation Works Including Provision Of Earthing Electrical Works, Installation Of Airconditioner, Interior Painting, Internal Water Supply, External Water Supply, Sanitary Etc. At The O/O Mission Director, Samagra Shiksha,
Tender Value
67.80 Lakhs
Estimated cost
Bid Submission
26 Dec 2024
0 days left
EMD
1.35 Lakhs
Bank guarantee accepted
Document Fee
1356
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Renovation Repair An Renovation Works Including Provision Of Earthing Electrical Works, Installation Of Airconditioner, Interior Painting, Internal Water Supply, External Water Supply, Sanitary Etc. At The O/O Mission Director, Samagra Shiksha, Assam, Kahilipar
BOQ
| Sl. No. | Item Description |
| 1 | Interior painting works |
| 2 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing andplastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) |
| 3 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 4 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surfacehaving VOC content less than 50 grams/litre |
| 5 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats |
| 6 | False ceiling in accounts section in SIEMAT buildingSupply, fitting & fixing in position PVC false ceiling with necessary openings for lights etc. |
| 7 | Electrical worksWiring for circuit/ sub main wiring alongwith earthwire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.4x10 sqmm+2x6 sqmm earthwire |
| 8 | Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 m longetc. with charcoal/ coke and salt as required. |
| 9 | Providing and fixing 25mm x 25mm GI strip on surface or in recess for connections etc. as required. |
| 10 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drlling holes in cubicle panel, making connections etc. as required.100A, 30kA, FPMCC |
| 11 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drlling holes in cubicle panel, making connections etc. as required.250A, 50kA, FPMCCB |
| 12 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drlling holes in cubicle panel, making connections etc. as required.125A, 36kA, FPMCC |
| 13 | Supplying and fixing following rating four pole (three phase and neutral) 415 V residual current circuit breaker (RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 A |
| 14 | Supplying and fixing of following ways surface/ recess mounting vertical type 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder coated, inclusive of 200A tinned copper BUA bar, common neutral link, earth bar, DIN bar for mounting MCBs (but without MCBs and incomer) as required. (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.12 way, Double door |
| 15 | Tower AC for round building conference hallSupply, fitting, fixing in position as per the direction of the department - Tower air conditioner of capacity 2 ton (Blustar/ Daikin/ Ogeneral or similar) with all accessories complete with indoor and outdoor unit with company warranty and 3 years compresensive maintenance contract. |
| 16 | Split wall mounted AC for FLN/ Accounts/ Legal/ CivilSupplying, fitting & fixing with all accessories and as per the direction of the department: 2 ton split AC of reputed brand and 5 star rating with standard warranty and annual maintenance. |
| 17 | Aluminium partition works for 4th floor between FLN & LiftProviding and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 18 | Workstation for FLNProviding and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) |
| 19 | Repairing of security room |
| 20 | Water supply and sanitary works12 mm cement plaster of mix:1:4 (1 cement: 4 fine sand) |
| 21 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. |
| 22 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of sizeSize of Tile 600 x 600 mm |
| 23 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 24 | Providing and fixing white vitreous china water closet squatting pan (Indian type) :Orissa pattern W.C. pan of size 580x440 mm |
| 25 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 26 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc. complete. |
| 27 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 28 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore |
| 29 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore |
| 30 | Providing & fixing pillar cock to wash basins. |
| 31 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 32 | Waste coupling, waste pipe, connection pipe etc. |
| 33 | uPVC pipes (15mm to 100mm nominal dia), elbow, reducer tee, tank nipple, ball valve, union socket, plain socket, bushing, clamp etc. as per requirement at site |
| 34 | Toilet construction for security, visitors, drivers etc. near round building (backside) including landscaping in and around the buildings in office campus |
| 35 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \"V\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 36 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp |
| 37 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 38 | Supplying including installation, connection as approved by the Deptt., testing and commissioning of SUBMERSIBLE PUMP SET, Single Phase with steel cable rope and submersible cable complete as directed and specified by the deptt. Single phase Submersible motor pump set(Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guarsuitable for 100 mm bore well and above. 7.5 HP STAGE 5 to 26with control panel and all other accessories complete like pipe, wire etc. |
| 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia pipes |
| 40 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board510x1040 mm bowl depth 250 mm |
| 41 | RO water filter (Best quality) to be provided on every floor with AMC for two years |
| 42 | ReceptionSupplying, fitting, fixing in position as per the direction of the department a reception counter for front office using best quality engineered wood (MDF board/ ply board) and best quality lamination with provision for concealed wiring and electrical points for computer, printer, scanner, telephone etc. and suitable drawers, cabinet etc. as per requirement complete. |
| 43 | Office table |
| 44 | Office chair |
| 45 | Window blinds |
| 46 | Drain repairing |
AI Tender Summary
Tender Timeline
Dec 14, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedDec 26, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 26, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender