|
| 1 | 15mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed. |
| 2 | 20mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed. |
| 3 | 25mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed. |
| 4 | 40mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed. |
| 5 | 50mm bore GI Socket medium grade ISI Marked including dismantling of old unserviceable GI socket, complete all as specified & directed. |
| 6 | 15mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed. |
| 7 | 20mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed. |
| 8 | 25mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed. |
| 9 | 40mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed. |
| 10 | 50mm bore GI Elbow medium grade ISI Marked including dismantling of old unserviceable GI elbow, complete all as specified & directed. |
| 11 | 15mm bore GI long bend medium grade ISI Marked including dismantling of old unserviceable GI long bend, complete all as specified & directed. |
| 12 | 20mm bore GI long bend medium grade ISI Marked including dismantling of old unserviceable GI long bend, complete all as specified & directed. |
| 13 | 25mm bore GI long bend medium grade ISI Marked including dismantling of old unserviceable GI long bend, complete all as specified & directed. |
| 14 | 15mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed. |
| 15 | 20mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed. |
| 16 | 25mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed. |
| 17 | 40mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed. |
| 18 | 50mm bore GI union medium grade ISI Marked including dismantling of old unserviceable GI union, complete all as specified & directed. |
| 19 | 15mm bore GI nipple of different length as per requirement, both end screwed,medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed. |
| 20 | 20mm bore GI nipple of different length as per requirement, both end screwed,medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed. |
| 21 | 25mm bore GI nipple of different length as per requirement, both end screwed,medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed. |
| 22 | 40mm bore GI nipple of different length as per requirement, both end screwed,medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed. |
| 23 | 50mm bore GI nipple of different length as per requirement, both end screwed,medium grade ISI Marked including dismantling of old unserviceable GI nipple, complete all as specified & directed. |
| 24 | 20mm x 15mm bore GI reducing socket medium grade ISI Marked including dismantling of old unserviceable GI reducing socket, complete all as specified & directed. |
| 25 | 25mm x 20mm bore GI reducing socket medium grade ISI Marked including dismantling of old unserviceable GI reducing socket, complete all as specified & directed. |
| 26 | 15mm x 15mm x 15mm bore GI Tee,medium grade ISI Marked including dismantling of old unserviceable GI Tee, complete all as specified & directed. |
| 27 | 20mm x 20mm x 20mm bore GI Tee,medium grade ISI Marked including dismantling of old unserviceable GI Tee, complete all as specified & directed. |
| 28 | 25mm x 25mm x 25mm bore GI Tee,medium grade ISI Marked including dismantling of old unserviceable GI Tee, complete all as specified & directed. |
| 29 | 15mm bore GI solid plug,heavy duty, ISI Marked including dismantling of old unserviceable solid plug, complete all as specified & directed. |
| 30 | 20mm bore GI solid plug,heavy duty, ISI Marked including dismantling of old unserviceable solid plug, complete all as specified & directed. |
| 31 | 25mm bore GI solid plug,heavy duty, ISI Marked including dismantling of old unserviceable solid plug, complete all as specified & directed. |
| 32 | Notes for Srl Item No.1 to 31(i) Any material required for attending complaints shall be measured and paidunder respective item here-in-before. (ii)The complaints shall be attended and the defects shall be rectified by a team of expert and experiencedplumber/pipe fitter as directed.(iii)The complaints shall be attended and defect shall be rectified within 08 hrscommencing from date and time of notifying the complaint failing which a penalty @ Rs 100/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor\"s dues. Contractor rep shall be available wef 0800 Hrs to 2000 Hrs to receive and notify the complaint.(iv)In case, after checking and attending the defect, it is not possible to rectify the defects within 08 Hrs the facts shall be brought to the notice of Engineer-in-charge by the contractor /his rep. If Eng-in-charge is satisfied with contractors view, no recovery will be made. (v)Cutting of GI pipe in position and threading is also deemed to be included in the unit rate of the respective item No. 1 to 31.(vi)The pipe fitter shall always be in possession of die set complete with cutters, taps, pipe wrench, chain wrench, caulking tools, complete set of spanners and ladders etc., as required at site.(vii) The complaints for the above work shall be collected by contractor rep from MES maint incharge/ JE E/M on daily basis. |
| 33 | M&L for pumping out water and sediments from swimming pool of capacity 11 lakh litres situated near APS Kaluchak School and carrying out cleaning complete after scrapping out fallen paint funal ,voids etcby using mechanical scrappers brushes and cleaning with fresh water and applying lime/stable bleaching powder solution diluted in water drying for two hours washing out with clean water, cleaning the external areaof swimming pool complete specified and directedNOTE:- The water inside shall be vacated by the contractor by providing pump of suitable capacity at his own arrangement the entire scope of item shall be carried out in period of 24 hours so that swimming pool can be bring back into operation within 24 Hrs |
| 34 | Run lead including spurn yarn suitable for 80mm bore CI/DI pipe including taking out old unserviceable run lead / spurn yarn, complete all as specified & directed. |
| 35 | Run lead including spurn yarn suitable for 100mm bore CI/DI pipe including taking out old unserviceable run lead / spurn yarn, complete all as specified & directed. |
| 36 | Run lead including spurn yarn suitable for 150mm bore CI/DI pipe including taking out old unserviceable run lead / spurn yarn, complete all as specified & directed. |
| 37 | Notes for Srl Item No. 34 to36(i) Any material such as lead, spun yarn, CI specials, lead joints, D-joints, mechanical joints, clamps, joints etc required for attending complaints shall be measured and paidunder relevant items. (ii)The complaints shall be attended and the defects shall be rectified by a team of expert and experiencedplumber/pipe fitter as directed.(iii)The complaints shall be attended and defect shall be rectified within 08 hrscommencing from date and time of notifying the complaint failing which a penalty @ Rs 100/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor\"s dues. Contractor rep shall be available wef 0800 Hrs to 2000 Hrs to receive and notify the complaint. (iv)In case, after checking and attending the defect, it is not possible to rectify the defects within 08 Hrs the facts shall be brought to the notice of Engineer-in-charge by the contractor /his rep. If Eng-in-charge is satisfied with contractors view, no recovery will be made.(v)Cutting/ welding/ connecting of CI/DI pipe in position and threading for insertion CI/DIspecials and fittings is also deemed to be included in the unit rate of the respective item No. 32 to 35.(vi)The pipe fitter shall always be in possession of die set complete with cutters, taps, pipe wrench, chain wrench, caulking tools, complete set of spanners and ladders etc., as required at site.(vii) The complaints for the above work shall be collected by contractor rep from MES maint incharge/ JE E/M on daily basis. |
| 38 | Lifting defective submersible pumpset, column pipes (any number) from bore well (any depth/size), setting aside and stacking column pipes for reuse,lowering of submersible pumpset alongwith column pipes in the bore well as existing and making water and electrical connections as existing for running of pump motors, complete all as specified & directed.Notes : (i) Rubber gasket,nut, bolts, washer shall be measured and paid forseparately under appropriate item as \"Supply only\" of this schedule. (ii) Lifting / lowering shall be measured and paid only once for same nature of repair.(iii)Contractor shall attend and rectify the breakdown within 8 hours failing which a recovery of Rs 500/ hour shall be effected.(iv)In case the submersible pump set falls down during Extn/ Lowering/ Lifting, No extra payment to be made to the contractor for this work. |
| 39 | Supplyonly rubber gasket required against Serial Item No 35 here-in-before as per existing dia, complete all as specified & directed. |
| 40 | Supplyonlynut and bolt and washerrequired against Serial Item No 35 here-in-before as per existing dia and length, complete all as specified & directed. |
| 41 | Repairs to submersible pumpset of capacity 30 to 35 HP, 3 phase, 415 volts involving of following operations :-(a) Opening of the defective motor in MES yard / Pump House/ Workshop ( as approved by GE), cleaning the covers and parts as applicable in presence of Engineer-in-Charge to ascertain the quantum of defects and repairs involved.(b)Transporting the defective motor to contractor\"s workshop for repairs as directed by the Engineer in Charge and carrying out the necessary repairs including replacement of defective unserviceable parts.(c) Assembling the motor after repair.(d) Spray painting the repaired motor externally with two coats of synthetic enamelled paint of shade as approved by the Engineer-in-Charge.(e)Transporting the repaired motor to MES yard/ Pump Houseand carrying out necessary test in presence of Engineer-in-Charge to establish the functionability of the repaired motor up to the entire satisfaction of the Engineer-in-Charge. |
| 42 | All as per Srl item No.38 above but submersible pumpset of capacity 20 to 25 HP. |
| 43 | All as per Srl item No.38 here-in-before but submersible pumpset of capacity 15 to 17.5 HP. |
| 44 | All as per Srl item No.38 here-in-before but submersible pumpset of capacity 10 to 12.5 HP. |
| 45 | All as per Srl item No.38 here-in-before but submersible pumpset of capacity 5 to 7.5 HP. |
| 46 | Notes for Serial Item No 38 to 42 here-in-before :(i) Any parts required to be replaced during servicing, overhauling of motor, pump set etc. shall be measured and paid for separately under appropriate item as \"Supply only\" of this schedule. However labour element involved in replacement is deemed to be included in quoted rates against these items.(ii) Any minor repairs involved to make the motor, pump functional even if notified by the Engineer-in-Chargeshall be carried out by the contractor without any extra cost to the department.(iii) Rewinding of stator of motor, any machine to pump where involved shall be measured and paid for separately against relevant item of this schedule.(iv) Greasing/oilingetc of parts as required shall be done by the contractor without any extra cost to the department. |
| 47 | Supply only the followingitems to be incorporated against Serial Item No 38 to 42 above, suitable for submersible pumpset of capacity 5 HP to 35 HP of existing make, complete all as specified & directed :- |
| 48 | Water lubricant seal suitable for motor |
| 49 | Bowl assembly |
| 50 | T-bolt for motor |
| 51 | Thrust bearingfor motors as per existing |
| 52 | MS Flanged reducer as per existing |
| 53 | Stud as per existing size |
| 54 | Neck ring |
| 55 | Stainless steel key for impeller shaft |
| 56 | Impeller ( CI) |
| 57 | Stainless steel motor - pumpcoupler |
| 58 | Bush (gun metal) for pump as per existing |
| 59 | Bush(rubber) for pump as per existing |
| 60 | Repair to pump shaft |
| 61 | Repair to motor shaft |
| 62 | Bush to motor shaftas per existing |
| 63 | Repair to impeller by brazing or as required for 5 to 35 HP Pump set complete all as specified and directed. |
| 64 | Sand guard |
| 65 | Motor adaptor |
| 66 | Impeller sleeve(SS) |
| 67 | Rewinding of stator/rotor of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZof capacity 5 - 7.5 HP with water proof insulated copper wire of existing gauge (IS:8783:1995) and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed. |
| 68 | Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZof capacity 10 - 12.5 HP with water proof insulated copper wire of existing gauge (IS:8783:1995) and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed. |
| 69 | Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZof capacity 15 - 17.5 HP with water proof insulated copper wire of existing gauge (IS:8783:1995)and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed. |
| 70 | Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZof capacity 20 - 25 HP with water proof insulated copper wire of existing gauge (IS:8783:1995)and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed. |
| 71 | Rewinding of stator of submersible motor pump working on three phase 415 Volt to 440 Volts, 50HZof capacity 30 - 35 HP with water proof insulated copper wire of existing gauge (IS:8783:1995)and size to achieve the specified / required RPM /discharge including taking out old unserviceable winding, complete all as specified & directed. |
| 72 | Cleaning the over head water tank of capacity 50000 Gallons (twin or single chamber) by draining the complete water and brushing the surfaces with iron brush and removing the complete mud/silt and getting washed the complete inner surfaces of the tank using the bleaching powder and applying a coat of white wash inside the tank including bottom, sides and ceiling and writing date of cleaning the tank out side complete all as specified and directed. , complete all as specified & directed by the Engr-in-Charge. |
| 73 | Note : All type of T & P required for cleaning deemed to be included in the quoted rate. The unit rate quoted deemed to be including draining of water with mechanical equipments and working in water and mud etc. The unit rate quoted deemed to be include all safety precuation which shall be taken while working on RCC overhead reservoir/ Under ground sump and Contractor or his engineer shall be available during execution of the job. Lighting arrangement if required to be provided by the Contractor, temporarily at his own arrangements and the amount quoted for that is deemed to be inclusive in the unit rate and electricity / diesel shall not be provided by the department. |
| 74 | Submersible pump starter, 3 phasefully automatic star delta starter suitable for motor capacity 10-15 HP in sheet metal enclosure including heavy duty 4 pole contactor type TC1-DX, overload relay type LR3D/LR1D (relay range 13-22 A), auto start switch, three position selector switch for SPP auto/ SPP manual/ manual, dual analog VA meter, hour meter, RYB LED indicator, motor ON & Trip LED indicator, TP \"C\" curve MCB for short circuit protection including taking down old unserviceable submersible pump starter, complete all as specified & directed. |
| 75 | Submersible pump starter, 3 phasefully automatic star delta starter suitable for motor capacity 20-25 HP in sheet metal enclosure including heavy duty 4 pole contactor type TC1-DX, overload relay type LR3D/LR1D (relay range 28-42 A), auto start switch, three position selector switch for SPP auto/ SPP manual/ manual, dual analog VA meter, hour meter, RYB LED indicator, motor ON & Trip LED indicator, TP \"C\" curve MCB for short circuit protection including taking down old unserviceable submersible pump starter, complete all as specified & directed. |
| 76 | Submersible pump starter, 3 phasefully automatic star delta starter suitable for motor capacity 30-40 HP in sheet metal enclosure including heavy duty 4 pole contactor type TC1-DX, overload relay type LR3D/LR1D (relay range 36-60 A), auto start switch, three position selector switch for SPP auto/ SPP manual/ manual, dual analog VA meter, hour meter, RYB LED indicator, motor ON & Trip LED indicator, TP \"C\" curve MCB for short circuit protection including taking down old unserviceable submersible pump starter, complete all as specified & directed. |
| 77 | Cast lron sluice valve, non-rising type conforming to IS:14846-2000 of 150 mm bore consisting ofSS spindle as per IS:6603, cast iron body, dome & wedge as per IS:210,greasy jute type gland packing, fasteners as per IS:1367, natural rubber gasket, CI manual hand wheeletc, completedouble end flanged and drilled,ofClass PN-1 ( ISI marked) including all jointing materials such as rubber gasket insertionsheet nuts, bolts and washers etc, testing, taking out old unserviceable sluice valve from pipeline and removing from site, complete all as specified & directed. |
| 78 | Gun metal gate valve confirming to IS : 778 -1980, CL-1 with iron wheel head screwed both ends for iron pipe including taking down old unserviceable valve, complete all as specified & directed for the following sizes :- |
| 79 | 20mm bore |
| 80 | 25mm bore |
| 81 | 40mm bore |
| 82 | 50mm bore |
| 83 | Excavationintrenchesnotexceeding1.5 mtr wideandnotexceeding1.5 mtr indepthandgettingoutin any type ofsoilforwater supply pipe line etccomplete allasspecified&directed.Note :Due care shall be taken while deciding cable route for excavation.However any damage to Signal, BSNL, MES cable water/sewage pipe or any other service while excavation will be made good by the contractor and cost of the same for jointing material & labour is deemed to be included in the cost of excavation. |
| 84 | Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specifed & directed. |
| 85 | Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified & directed. |
| 86 | Taking out cast iron water main/ ductile iron pipe line (including all fittings) with spigot and socket ends/flanged pipes including burning out lead joints and recovering lead and removing to store for reuse, complete all as specified & directed for the following sizes :-Note : Earth work shall be measured and paid for separately under respective items. |
| 87 | 80mm bore |
| 88 | 100mm bore |
| 89 | 150mm bore |
| 90 | Ductile iron pipe, socket & spigot with bulb type rubber tyton gasket and jointing materialas per standard complete of class K-7 confirming to IS: 8329:2000 (latest revision), ISI marked laid in trenches/ fixed on pedestals etc including complete mortar lining (CML) and outside black bitumen coating etc complete all as specified & directed for the following sizes :- Note: Earth work & DI fittings will be measured and paid for separate under respective items. |
| 91 | 80mm bore |
| 92 | 100mm bore |
| 93 | 150mm bore |
| 94 | Cast iron/ Ductile ironfittings confirming IS:9523 2000 of class K-12, PN-10 for spigot and socket pipe such as bends (any type, radius and angle),tapers any type (straight, bend, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc),Tee pieces single branch,Y junction, double branch, cross (all sockets or socket and spigot) collars caps and plugs upto 200 mm borepipes, complete all as specified &directedNote : Earth work shall be measured and paid for separately under respective items. |
| 95 | Taking out existing old unserviceable /rusted / broken galvanised iron water main pipe line including all fittings, complete all as specified & directed for the following sizes :- Note : Earth work shall be measured and paid for separately under respective items. |
| 96 | 20mm bore |
| 97 | 25mm bore |
| 98 | 40mm bore |
| 99 | 50mm bore |
| 100 | 80mm bore |
| 101 | 100mm bore |
| 102 | Galvanised iron medium grade water tubingwith all fittings and fixtures (ISI marked) confirming to IS:1239, laid in trenches or fixed on wall or in any positionincluding necessary saddles and iron clamps, complete all as specified & directed for the following sizes :- Note: The work shall be carried out at various locations under GE Kaluchakon external building walls upto a height of 4th story. Cost of necessary scaffolding arrangement shall be deemed included in the unit rate for these items. |
| 103 | 20mm bore |
| 104 | 25mm bore |
| 105 | 40mm bore |
| 106 | 50mm bore |
| 107 | 80mm bore |
| 108 | 100mm bore |
| 109 | Servicing and maintenance of existing Chemical Dosing system suitable to inject solution upto 25 LPH comprising dosing pump coupled with three phase electric motor of capacity 0.5 HP, 1440 RPM assembly with agitator in one motor, agitator with SS sweep blade duly FRP coated, FRP tank 150 ltrs capacity, complete unit of make satya saiincluding replacement of unserviceable part at site chemical dosing system & changing of Teflon gland packing and cleaning of NRV set, checking the complete system complete all as specified and as directed.Make of Plant : Sathya Sai Services .Notes :1. Servicing shall be carried out by the company rep and the rate for this shall deemed to be included in item. 2. Spares shall be of original manufacturer only.3. Spares shall be paid and measured andseperately under as Supply only as mentioned here-in-after :- |
| 110 | (a) PVC adopter for suction and delivery without NRV. |
| 111 | (b) PVC strainer washer type heavy duty or Y type strainer for suction. |
| 112 | (c) Teflon gland square type 3 mm |
| 113 | (d) Chemical Oil seal with cap |
| 114 | (e Monoblock pump set capacity 0.5 HP suitable for chemical dosing plant all as per specified and directed by Engr - In - Charge |
| 115 | Supply & Fix Alum crystal in 50Kg bag to settle down the suspended impurities all as directed. |
| 116 | Supply & Fix copper sulfate of superior quality complete all as directed. |
| 117 | M/L for carrying out physical, chemical & Bacteriological analysis all as per IS 10500:2012 for Drinking water (Fresh potable/raw water fromPump Houses at various locations under GE Kaluchak) from approved govt or other approved labs .Note : The rate quoted deemed to inclusive of collecting and transporting water sample in Sterilised bottle/PVC container & submitting the same for testing on same day .Note: water sample from one borewell will be considered as one job. |
| 118 | Re-development of tube well by means of pumping by air compressor of minimum pressure 10Kg/cm2 (compressor to be arranged by contractor at his own cost), until sand free and clean water is obtained at the optimum yield including testing of water sample from Government approved Laboratory / Regional Research Laboratory to confirm the potability of water as per IS-10500-1991 complete all as specified and directed.Notes :1. The development shall be carried out in each water bearing zone and till the yield of the bore well improves at a fixed draw down of water. The Srata Chart shall be provided by the Department.2. The cost of arranging and transportation of Compressor and allied equipments required for development shall be deemed to be included in the quoted rate of Serial Item No \"19\" and nothing extra from the Department shall be admissible on this account. |
| 119 | M&L for taking out CI/MS/DI pipe flanged type 150mm/100mm dia of rising main/delivery /over flowof Over head reservoir of height 30 metre , cleaning, welding and refixing with replacing nuts and bolts,rubber gasket/gland packing etc incld replacement of sluice valve as required at site and as directed by Engineer in charge.Note: The work shall be carried out at various linstallations under GE Kaluchak .Rates quoted includes for necessary scaffolding arrangement upto a heigfht of 30 metres.The sluice valve shall be measured and paid separately under respective items. |
| 120 | Repacking stuffing box of sluice valve spindle,replacement of worn out check nuts,repairs to gate assembly,replacement of jointing materials such as rubber gasket ,nuts bolts and washers gland ropeincluding taking apart and reassembling for 80mm bore complete all as specified and directed by Engineer in charge. |
| 121 | Repacking stuffing box of sluice valve spindle,replacement of worn out check nuts,repairs to gate assembly,replacement of jointing materials such as rubber gasket ,nuts bolts and washers gland ropeincluding taking apart and reassembling for 100mm bore complete all as specified and directed by Engineer in charge. |
| 122 | Repacking stuffing box of sluice valve spindle,replacement of worn out check nuts,repairs to gate assembly,replacement of jointing materials such as rubber gasket ,nuts bolts and washers gland ropeincluding taking apart and reassembling for 150mm bore complete all as specified and directed by Engineer in charge. |
| 123 | Taking out sluice valves ,refacing,regrinding ,threading and refixing for 80mm bore all as directed. |
| 124 | Taking out sluice valves ,refacing,regrinding, threading and refixing for 100mm bore all as directed. |
| 125 | Taking out sluice valves ,refacing,regrinding, threadingand refixing for 150mm bore all as directed. |
| 126 | M&L for packing glands of size 6-10mmcomplete all as specified and as directed.Make: Spitmaan/ champion |
| 127 | M&L for packing glands of size 11-25mmcomplete all as specified and as directed.Make: Spitmaan/ champion |
| 128 | Supply and fix column pipe MS 80 mm boreISI MARKED 3 Mtr length each welded with MS flanged drilled for nut bolt and washer including rubber gasket 3 mm thick. |
| 129 | Supply and fix column pipe MS 100 mm bore ISI MARKED 3 Mtr length each welded with MS flanged drilled for nut bolt and washer including rubber gasket 3 mm thick. |
| 130 | Supply, laying and testing PVC insulated and sheathed flat 3 core 6 Sqmm copper stranded conductor water proof submersible cable fixed to submersible monoblock pump set to starter as directed including taking out old unserviceable cable.M |
| 131 | Supply, laying and testing PVC insulated and sheathed flat 3 core 10 Sqmm copper stranded conductor water proof submersible cable fixed to submersible monoblock pump set to starter as directed including taking out old unserviceable cable. |
| 132 | Supply, laying and testing PVC insulated and sheathed flat 3 core 16 Sqmm copper stranded conductor water proof submersible cable fixed to submersible monoblock pump set to starter as directed including taking out old unserviceable cable. |
| 133 | S&F and testing Cast lron sluice valve, non-rising type conforming to IS-14846-2000, sutiable for 100 mm bore pipe consisting ofSS spindle as per IS 6603, Cast iron Body, Dome & Wedge as per IS 210,greasy jute type gland packing, fasteners as per IS 1367, Natural rubber gasket, CI manual hand wheeletc completedouble end flanged and drilled,ofClass PN-1.6 ( ISI marked) including all jointing materials such as rubber gasket insertionsheet nut ,bolts and washers etc including taking out old unserviceable sluice valve from pipeline and removing from site complete all as specified and directed. |
| 134 | All as per above item but but of size 80 mm dia |
| 135 | Cast iron non return valve single door confirming to IS 5312,Part-1 / BS EN 12334 (BS 5153) suitable for 150mm bore pipe classPN 1.6 gun metal sheat and flap with flanged and drilled flanged ends including having bypass arrangement complete all as specified . |
| 136 | Material and labour PCC 1:4:8 type -D2 using 40mm graded aggregate in fdn filling and masscomplete for pipe line supports or any indicated position all as specified and directedby Engr-in-charge. |
| 137 | M&L for chlorine test kit with coloured sample complete with all testing fitments and OT solution in rexene finish box. Make: Rmco KOLKATA |
| 138 | Supply only OT solution for chlorine test 500 ML bottle complete all as specified and directed. Make : RMCO Kolkata |
| 139 | Supply and testing ofHigh strength Calcium based granular disinfectant in air tight container for water, treatment, more stable than chlorine gas, and stronger than Bleaching Powder, and calcium Hypochlorite (chlorine content 65% to 70%) of following specifications :(a) Chemical analysis & physical observations :Description : Whitish granulesGranular size (Mesh passing through – 100 BSS) : 1.1 (± 0.1) % , Water / moisture: 5.00 (± 0.2) %Other insoluble Calcium salts: 1.1 (± 0.1) %Mercury & other Heavy Metal contaminants : BDL.The chlorination chemical must contain appropriate quantities of dispersants / corrosion inhibitors to prevent encrustation / scaling in distribution systems.(b) Strength in terms of quantity of chlorination chemical required to obtain free chlorine of 1 ppm per lakh liters of water:Requirement must be 100 gm. per one lakh litre of water to achieve 05-1.0 ppm Av. Cl. at injection point (site & raw water quality variations may apply additionally).(c) Stability: Projected shelf life of chlorination chemical must be one year with minimal loss of chlorine. Make : M/s Sree Rayallaseema Hi strength Hypo Ltd(Brand: Name: Puri Chlor) or Any product approved by E in C\"s Branch. Note: The Contractor shall provide original test certificate with hologram to the Engineer in charge . |
| 140 | Painting of pump motor, rising mains, delivery mainsand distribution header, distribution diagrams which includes sluice valves, NRV fittings, sockets, elbows etc , rising mains of overhead tanks, overflow mains, delivery mains of overhead tanks with color coding of various tubewell installations as directed and specified by Engr in charge (Rate quoted will be composite of material, labour and T&Pthroughout the periodicity as and when required) |
| 141 | Supply, installation, testing and commissioning of CPRI approved, factory made, LT Feeder Pillar Box cubical, Outdoor type, floor mounted double door, 3 phase 4 wire, 50 cycles, 415 Volts. The panel board shall be made of 3.15 thick CRCA sheet for load bearing members and 16 SWG (1.6 mm thick) for doors covers and internal partitions and shall be powder coated both side.Base frame of the panel shall bemade of ICMC channel of size50 x50 x 6mm,duly groutedon platform made of brick work in CM (1:2:4), 15mm thick plastering in CM (1:6) having minimum height of 450mm.The panel shall be provided with separate compartments for each switch gears with hinged door including interlocking with switch gears. The panel board shall be suitable for AC, 415 Volts, 50 Hz, 3 phase, 4 wire supply complete with epoxy insulated 250 Amps rated high conductivity aluminium bus bars, supported with DMC / SMC barriers and coluor coded, prewired with copper cable, the degree of protection is IP-54. the panel shall be complete with instrumentation such asLED phase indicating lamps and CT\"s, including extended aluminium strip of rating of Incomer and outgoing as per rating of MCCB’s, including aluminium lugs to connect the cable dismantled before etc., and comprising of the following:- |
| 142 | (a) MCCB 100 Amps, 4 pole with breaking capacity 25KA (Adjustable thermal & magnetic release) - 01 Nos(Incomer)(b) MCCB 63 Amps, 3 pole with breaking capacity 25KA (Adjustable thermal & magnetic release) - 01 Nos(Spare) (c) Panel mounted change over switch capacity 100Amp 4 Pole - 01 Nos (d) Digital Volt meter .Make Schneider Cat No DM3210 (e) Digital Ammeter meter .Make Schneider Cat No DM3110(f) Indicator lamp RYB :01 Set, C&S(g) CT\"S 200/501 Set Make Legrand |
| 143 | Attending day to day (including sundays and holidays) external/internal water supply complaints/breakdowns of all nature i.e leakage in galvanized iron water supply pipe lines of bore 15mm to 80mm/ fitting/fixture,leakage in water pumping sets, over flow of overhead tank, no water supply, taking out water from trenches during repair including necessary excavation ,returning filling and removal as per site requirement complete all as directed.Note:(i) Any material required for attending complaints shall be measured and paid separately under respective item herein after. (ii)The complaints shall be attended and the defects shall be rectified by a team of expert and experiencedplumber/pipe fitter (iii)The complaints shall be attended and defect shall be rectified within 08 hrscommencing from date and time of notifying the complaint failing which a penalty @ Rs 50/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor\"s dues.Contractor rep shall be available wef 0800 hrs to 2000 Hrs to receive and notify the complaint.(iv)In case, after checking and attending the defect, it is not possible to rectify the defects within 08 hrs the facts shall be brought to the notice of Engineer-in -charge by the contractor /his rep . If Engineer -in-charge is satisfied with contractors view, no recovery will be made.(vi)Cutting of GI pipe in position and threading is also deemed to be included in the job rate (Fitting and fixtures will be measured and paid separetely under respective item of Sch A.(vii)All Transport, T & P such as JCB/ Dewatering pumpset /DG set equired for attending the complaints shall be provided by the Contracor.(viii)The pipe fitter shall always be in possession of die set complete with cutters , Taps , Pipe wrench, Chain wrench,Caulking tools, Complete set of spanners and ladders etc…, as required at site.(ix) The complaints for the above work shall be collected by contractor rep from MES maint incharge/ JE E/M on daily basis.Required stationary such as complaint register ,job card etc shall be arranged and maintained by contractor. |
| 144 | Cleaning the entire area within the fencing/ boundary wall of tubewell installations which includes cutting ofbushes/shrubs/unwanted grass in the periphery/surronding of complete installation i.e O/H reservoir, Gen rooms, Clear water sumps, removing unwanted grass at the complete installation including sweeping of whole area and disposal of all the removed material as directed after cutting/cleaning. The plinths around the complete buildings at installation is to be maintained free from any type of grass and cleaning complete all as directed and specified by Engr in charge. (The entire job to be operated two times doing the complete work) |
