|
| 1 | Demolition of plain cement concrete in ground floors or above ground floor and paving n.exc 15 cm thickness (Below or above ground level) |
| 2 | Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars etc all as spd. |
| 3 | Excavation in trenches, n exe 1.5m wide and n exc 1.5m in depth for foundationand getting out in hard/sensesoil, complete all as specified. |
| 4 | M&L of brick work withsub class\"B\" burnt bricks straight or curved on planexc. 6 m mean radius bult in CM 1:6 complete all asspd & dir. |
| 5 | Rendering 15mm thick cement plaster in cement mortar 1:4 on on brick work or concreteand finished even and smooth (without using extra cement) complete all as specified and as directed by Engineer-in-charge. |
| 6 | M&L for Cement concrete type D-2, 1:4:8(40mm graded agg) as in foundations,filling and mass concrete, sub base all as specified. |
| 7 | Surface excavation n.exc 30cm in deep and averaging 15cm deep and getting out. |
| 8 | Returning , filling in , includingspreading , levelling , watering and well ramming in layers not exc 25 cm in hard/dense soil . |
| 9 | Removing excavated materials n exc 50 m and depositing where directed at a leveln. exc 1.5 m above the starting point . |
| 10 | Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as spd |
| 11 | M&L Hardcore, broken stone to gauge n exc 63mmas in floor complete all as specified. |
| 12 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded cr. stone aggr) finished even and smooth using extra cement as in floor complete all as specified. |
| 13 | M&L Machine pressed precast conctete interlocking paver block , rubber moulded, PU coated, glossy finished, any shape and size of 80 mm thickness M-35 Grade with grey cement and pigment over and incl 50mm thick sand cusion completeall as spd. |
| 14 | M&L for coping/bed blocks, kerb at junction of parapet wall & roof etc.in PCC 1:2:4 Type B-1 ( using 20mm gr. Cr. stone aggr) completle all as spd & dir. |
| 15 | Surface dressing n.exc 15cm deep and getting out in any type of soil, complete all as specified. |
| 16 | S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar workconforming to Fe.290.Gde-E-165 including fixing in PCC platform . |
| 17 | M&L for 25 mm thick cement concrete 1:2:4, Type B-1 (20 mm graded stone aggregate)as in sub-base of floor for tiles/Kota stone all as specified. |
| 18 | M&L for PCC 1:3:6 type C-2(using 20 mm graded cr. stone aggr),75mm thick as in plinth protection finished even and smooth without using extra cement layed in bays. |
| 19 | M&L for two coats of cement based paints incl preparation to newly plastered surfaces of walls etc completed all as specified. |
| 20 | Two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfacesincl preparation of surfaces exc.10cm width or girth. |
| 21 | Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents. |
