|
| 1 | SCHEDULE \"A\" B/R ITEMS |
| 2 | Excavating in trenches not exceeding 1.5 Metre wide & not exceeding 1.5 Metre depth and getting out soft/disintegrated rock, Complete all as specified and directed by Engineer-in-Charge. |
| 3 | Excavating over area not exceeding 1.5 Metre deep and getting out soft/disintegrated rock, Complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material & Labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation and mass concrete, Complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material & Labour for Reinforced cement concrete M-30 (Design Mix) (20mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5 m span, Complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material & Labour for RCC M-30 (Design Mix) (using 20mm aggregate) for chajjas, Complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material & Labour for Reinforced cement concrete M-30 (Design Mix) (20mm graded aggregate) in slab supported on walls, Complete all as specified and directed by Engineer-in-Charge. |
| 8 | Form work to soffits of suspended slabs such as roof slabs, floors slabs,landings and similar work not exceeding 200mm thick in sloping, Complete all as specified and directed by Engineer-in-Charge. |
| 9 | Form work to sides and soffits of floor or roof beams, beam haunching, lintel etc., Complete all as specified and directed by Engineer-in-Charge. |
| 10 | Formwork to chullah hoods, chajjas, troughs and similar items including edges as in rough finished surfaces of concrete, Complete all as specified and directed by Engineer-in-Charge. |
| 11 | Mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips, Complete all as specified and directed by Engineer-in-Charge. |
| 12 | -ditto- all as per item No.10 above, but 6mm to 8mm dia., Complete all as specified and directed by Engineer-in-Charge. |
| 13 | -ditto- all as per item No.10 above, but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders, Complete all as specified and directed by Engineer-in-Charge. |
| 14 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm as in soft/disintegrated rock, Complete all as specified and directed by Engineer-in-Charge. |
| 15 | Removal of excavated rocks exceeding 250 Metre but not exceeding 500 Metre and depositing where directed at level not exceeding 1.5 Metre above the starting point, Complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material & Labour for Porbandar stone masonry, well bonded, bedded and solidly hearted built in Cement Mortar 1:6, Complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material & Labour for providing APP based membrane course roof treatment in layers with following provisions:- (i) Applying one coat of bitumen\"s primer polymerized primer oil based coat, evenly @ 0.3KG/Sqm as priming coat to the prepared surfaces, till the surfaces is properly impregnated and the solvent oil in the base primer shall be allowed to evaporated completely.(ii) Applying APP based pre-fabricated with non woven polyester reinforced membrane stabilized with fibre glass strands and top with grey mineral slates 3mm thick and weight not less than 3.50 Kg/Sqm by torch application method.(iii)Applying a coat of solar reflective bituminous aluminium paint @ 0.10Kg/Sqm over mineral surface. |
| 18 | Material & Labour for rendering 10mm thick on fair face of brick work or concrete surfaces in Cement Mortar 1:6 finished even and smooth wiithout using extra cement, Complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material & Labour for rendering 15mm thick, cement plaster, in cement mortar (1:4) mixed with integral water proofing compound as per manufactures instruction, on fair faces of brick walls or concrete surfaces finished even and smooth without using extra cement in any height, Complete all as specified and directed by Engineer-in-Charge.Note:- Water proofing compound shall be measured and paid separately) |
| 20 | Supply only water proofing compound (integral), Complete all as specified and directed by Engineer-in-Charge. |
| 21 | Material & Labour for rendering 5mm thick cement plaster in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement on ceiling in any height, Complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material & Labour for moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering, Complete all as specified and directed by Engineer-in-Charge. |
| 23 | Material & Labour for broken stone or boulders Hardcore of gauge exceeding 63mm but not exceeding 100mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled/rammed to a true surface, Complete all as specified and directed by Engineer-in-Charge. |
| 24 | Material & Labour 75mm thick Cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement, Complete all as specified and directed by Engineer-in-Charge. |
| 25 | Material & Labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate 75mm thick as in sub base, Complete all as specified and directed by Engineer-in-Charge. |
| 26 | Material & Labour for Non-skid ceremic coloured tiles 7 to 8mm thick ( square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15mm thick with Cement Mortar 1:6, Complete all as specified and directed by Engineer-in-Charge. |
| 27 | Material & Labour for coloured glazed ceramic tiles of size 450x300x7 mm thick in vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat in 10mm thick with Cement Mortar 1:4, Complete all as specified and directed by Engineer-in-Charge. |
| 28 | Material & Labour for powder coated Aluminium Anodised frame for door, sliding windows & ventilators with one or more rebates including joining cleats for fixing etc. Rubber gasketting all round the panels/ shutters to fix glass, PVC gasketting in all channels, (minimum thickness of powder coating 50 micron and anodizing thickness 15 microns), Complete all as specified and directed by Engineer-in-Charge. |
| 29 | Material & Labour for powder coated Aluminium Anodised shutter for door, sliding windows & ventilators with one or more rebates including joining cleats for fixing etc., Rubber gasketting all round the panels/ shutters to fix glass, PVC gasketting in all channels, (minimum thickness of powder coating 50 micron and anodizing thickness 15 microns), Complete all as specified and directed by Engineer-in-Charge. |
| 30 | Material & Labour for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer of 15mm thick with Cement Mortar 1:6 etc., Complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply & Fixing Vitreous china wash basin, white, size 600 x 360 x 95 mm including waste pipe, Complete all as specified and directed by Engineer-in-Charge. |
| 32 | Supply & Fixing vitreous China Urinal, Flow Urinal with SENSOR STAR WHITE COLOUR SIZE: 29.5mm x 32.5mm x 57.5mm, white, Complete all as specified and directed by Engineer-in-Charge.Make - HINDWARE (Cat Pat No 60021) or equivalent make mentioned in Appendix \"B\". |
| 33 | Supply & Fixing EWC one piece with integrated cistern with soft closing seat cover and twin flush fittings size 690 x 375 x 785mm, white in colour, Complete all as specified and directed by Engineer-in-Charge.Make - Prayag (Cat pat No - 4364) or equivalent make mentioned in Appendix \"B\". |
| 34 | Supply & Fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, Complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply & Fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheets for top rail, lock rail, & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, Complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply & Fixing vitreous china squatting pan, Orissa pattern size 580 x 440 mm white, with integral foot rests, Complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply & Fixing 10 Litre capacity PVC valveless, syphonic action type flushing cistern, lowlevel, white, with inlet, ball valve, float and handle including brackets, Complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply & Fixing 15mm Angle Cock, fancy type, brass chromium plated, screwed down, high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, Complete all as specified and directed by Engineer-in-Charge.Make : Prayag (Cat Pat No-8510)or equivalent from makes mentioned in Appendix ‘B’. |
| 39 | Supply & Fixing 200mm long Aluminium, anodised, barrel tower bolt of extruded section and fixed, Complete all as specified and directed by Engineer-in-Charge. |
| 40 | Supply & Fixing stainless steel butt hinges medium weight of size 100mm, Complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply & Fixing 150mm long Extruded aluminium alloy handles, fabricated type, anodised, Complete all as specified and directed by Engineer-in-Charge. |
| 42 | Supply & Fixing bib taps cast copper alloy fancy type chromium plated scresed down screwed for iron pipes 15mm dia., Complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply & Fixing 15mm sensor pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed, Complete all as specified and directed by Engineer-in-Charge. Make : HINDWARE (Cat Pat No ECO SENSOR FAUCET F240011) or equivalent make mentioned in Appendix ‘B’. |
| 44 | Supply & Fixing of rotationalmoulded poly thylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs, Complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply & Fixing 15mm dia., 45 cm long PVC water connection with PTMT nuts and washers, Complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply & Fixing Gun metal globe or gate valves of 20mm dia with iron wheel head screwed both ends for iron pipe and fixed, Complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply & Fixing Tubular towel rail CP Brass, 60cm long between flanges, Complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply & Fixing Toilet Roll Holder with flap, Complete all as specified and directed by Engineer-in-Charge.Make : Jaquar (Cat Pat No AQN-7753) or equivalent make mentioned in Appendix ‘B”. |
| 49 | Supply & Fixing Soap Dispenser holder, Complete all as specified and directed by Engineer-in-Charge.Make : Prayag (Cat Pat No BA-83) or equivalent make mentioned in Appendix ‘B”. |
| 50 | Supplying and laying of CPVC pipes of size 20mm outer dia SDR-11 & Plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors, Complete all as specified and directed by Engineer-in-Charge. |
| 51 | Supply & Fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trench of bore 110mm (rates includes for making good disturbed surfaces), Complete all as specified and directed by Engineer-in-Charge. |
| 52 | Supply & Fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trench of bore 75mm (rates includes for making good disturbed surfaces), Complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply & Fixing PVC (SWR) bends any radius of 75mm bore, Complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply & Fixing PVC (SWR) bends any radius of 110mm bore, Complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply & Fixing PVC(SWR) vent cowl as specified of dia 75mm bore, Complete all as specified and directed by Engineer-in-Charge. |
| 56 | Material & Labour preparation of new plastered or unplastered surfaces and applying onecoats of oil bound distemper on wall over a coat of alkali resistant primer over two coat of wall care putty (water proof), Complete all as specified and directed by Engineer-in-Charge. |
| 57 | Material & Labour Preparation of new plastered surfaces of ceiling and applying three coats of white wash, Complete all as specified and directed by Engineer-in-Charge. |
| 58 | Material & Labour for preparation of new plastered surfaces of wall and applying two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as per the manufacturers instructions, Complete all as specified and directed by Engineer-in-Charge. |
| 59 | Excavating in post holes (or similar holes) each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in Hard/dense soil, Complete all as specified and directed by Engineer-in-Charge. |
| 60 | Material & labour for Cement concrete (Type B-1 1:2:4) 20mm graded stone aggegrate as in pillars, boundary pillars and posts (including caps and bases) walls or retaining walls, any thickess, size or shape including pilasters, buttresses columns, Complete all as specified and directed by Engineer-in-Charge. |
| 61 | Supply & Fixing Galvanised iron Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, tubular, channel or flat sections), including distance piece, cleats etc fixing complete using Fe-410-W( Gde E-250) quality-A, Complete all as specified and directed by Engineer-in-Charge. |
| 62 | Supply & Fixing Plates (plain or chequered), channels, square cut or notched ( ordinary and counter sunk) forming holes, without any attachment etc complete using Fe-410-W( Gde E-250) quality-A, Complete all as specified and directed by Engineer-in-Charge. |
| 63 | Supply & Fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm and not exc. 10 cm long with 5 to 10mm dia of neck, Complete all as specified and directed by Engineer-in-Charge. |
| 64 | Supply & Fixing Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw, Complete all as specified and directed by Engineer-in-Charge. |
| 65 | Supply & Fixing Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw, Complete all as specified and directed by Engineer-in-Charge. |
| 66 | Material & labour for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of epoxy paint over a coat of red oxide primer etc., Complete all as specified and directed by Engineer-in-Charge. |
| 67 | Material & labourfor rendering 15mm thick on fair face of brick work or concrete surfaces in Cement Mortar 1:4 finished even and smooth wiithout using extra cement, Complete all as specified and directed by Engineer-in-Charge. |
| 68 | Material & labour for 15mm thick rendering in Cement Mortar 1:6 to brick/concrete wall surfaces trowelled to even & smooth w/o using extra cement, Complete all as specified and directed by Engineer-in-Charge. |
| 69 | Material & Labour for preparing surfaces plastered or unplastered new surface of wallsapplying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish two coats as per manufacture instruction with smooth roller finish, Complete all as specified and directed by Engineer-in-Charge. (Note:- After painting, cleaning of all floors, glass, Supply & Fixing Furniture by own arrangement). |
| 70 | Material & labour for Powder Coating aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., Complete all as specified and directed by Engineer-in-Charge. |
| 71 | Material & labour for Powder Coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., Complete all as specified and directed by Engineer-in-Charge. |
| 72 | Material & labour for Powder Coating aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B- 21, 100mm long (2 no.) suitable handle (1 no.), Complete all as specified and directed by Engineer-in-Charge. |
| 73 | Supply & Fixing for 7mm thick aluminium grills surrounded by aluminum \"C\" channel and size of opening 75x75 mm all as specified and directed fixed from ground floor to height of any floors, Complete all as specified and directed by Engineer-in-Charge. |
| 74 | Supply & Fixingfor 5mm thick plain glass of selected quality, pin headed type and glazing with oil putty in squares exceeding 0.5 Sqm in each pane, Complete all as specified and directed by Engineer-in-Charge. |
| 75 | Supply & Fixing Anodised aluminium snap grid framed (size 605mm x 605mm) work for false ceiling and including hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40x3mm size 60mm long and expansion holdfastener 12.5mm dia 40mm long, Complete all as specified and directed by Engineer-in-Charge. |
| 76 | Supply & Fixing False ceiling with gypsum board, perforated type, and acoustic purpose, factory made matt finish surface, 600mm x 600mm in size and 12mm thick, Complete all as specified and directed by Engineer-in-Charge. |
| 77 | Internal Electrification |
| 78 | Material & Labour for Point wiring complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit (minimum 20mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- 1 ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 1.5 Sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame of required modules for mounting of modular switches, sockets, switch sockets, fan regulators with required modules, Complete all as specified and directed by Engineer-in-Charge.for the following:- |
| 79 | One light point controlled by one, one way switch |
| 80 | One fan point controlled by one, one way switch |
| 81 | One 3 pin 6 Amps socket outlet on same board |
| 82 | One 3 pin 6 Amps socket outlet on independent board . |
| 83 | Material & Labour for Point wiring complete with 2.5 Sqmm single core PVC insulated but unsheathed multistrand copper conductor FRLS cabeI 650/1100 Volts grade conforming to IS-694 drawn through PVC conduit (minimum 20mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR Part-1) ISI marked with wall thickness not less than 1.8mm heavy duty including conduit accessories concealed pressed steel terminal boxes of size cover white/coloured including2.5 Sqmm PVC insulated but unsheathed copper conductor FRLS cable as earth continuity wire for one 3 pin 15 or 16 Amps socket outlet on independent board, including modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets with required modules, Complete all as specified and directed by Engineer-in-Charge. |
| 84 | Supply & fixing modular switch 1 way, 6 Amps, 1 module (ISI marked), Complete all as specified and directed by Engineer-in-Charge. |
| 85 | Supply & fixing modular switch 1 way, 16 Amps, 1 module (ISI marked), Complete all as specified and directed by Engineer-in-Charge. |
| 86 | Supply & fixing modular socket, 6 Amps, 2/3 pin combind 2 module (ISI marked), Complete all as specified and directed by Engineer-in-Charge. |
| 87 | Supply & fixing modular socket, 6/16 Amps, 2/3 pin combind 2 module (ISI marked), Complete all as specified and directed by Engineer-in-Charge. |
| 88 | Supply & fixing ceiling rose, surface bakelite, 65 x 17 mm three terminals (ISI Marked), Complete all as specified and directed by Engineer-in-Charge. |
| 89 | Supply & Fixing of wall mounted LED Tube light fitting 1 x 20W LED (6500K), 4 feet, Sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work, including making connections with 2 core flexible copper wire 0.50 Sqmm from ceiling rose after fixing fitting, Complete all as specified and directed by Engineer-in-Charge. |
| 90 | Supply & Fixing of wall mounted LED Tube light fitting 1 x 10W LED (6500K), 2 feet, Sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work, including making connections with 2 core flexible copper wire 0.50 Sqmm from ceiling rose after fixing fitting, Complete all as specified and directed by Engineer-in-Charge. |
| 91 | Supply & Fixing LED Bulkhead light fitting, withIP-65 protection & IK-08 impact resistance 20 Watt, suitable for wall surface including connected with 2 core flexible copper wire 0.50 Sqmm from ceiling rose after fixing fitting in position, Complete all as specified and directed by Engineer-in-Charge. |
| 92 | Supply & Fixing MCB DB 8 way SPN, (Acrylic door), IP 43 “Weather proof” Concealed/ Surface mounted and making good the disturbed surfaces of walls/ceiling/floor etc. complete with all accessories, main switch and connecting the cables with proper, Complete all as specified and directed by Engineer-in-Charge. |
| 93 | Supply and fixing of MCB SPN, 240 volt, 32 Amps, Complete all as specified and directed by Engineer-in-Charge. |
| 94 | Supply and fixing of MCB SP, 240 volt, 6 to 32 Amps, Complete all as specified and directed by Engineer-in-Charge. |
| 95 | Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete with all accessories, and connecting the cables with proper from Ceing rose to Exhaust fan, Complete all as specified and directed by Engineer-in-Charge. |
| 96 | Material & labour for Earthing complete with GI earth plate 60cm x 60cm x 6mm thick electrode and 4mm dia GI wire as earthing lead.burried directly in ground (earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level. connected to GI wire earth lead 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 and including earth work, PCC pit and RCC cover, watering pipe 20mm dia light grade, funnel, wire mesh, protection pipe 15mm dia light grade up to 7.5 Metre length of earth wire, charcoal dust and salt etc and connected to earthing test point, Complete all as specified and directed by Engineer-in-Charge. |
| 97 | Excavation in trenches not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth and getting out in loose/ soft soil, Complete all as specified and directed by Engineer-in-Charge. |
| 98 | Returning filling in including spreading, levelling, watering and well Ramming in layers not exceeding 25 cm thick in loose/soft soil, Complete all as specified and directed by Engineer-in-Charge. |
| 99 | Removing excavated material not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point, Complete all as specified and directed by Engineer-in-Charge. |
| 100 | Supply and laying of XLPE insulated and PVC armoured heavy duty 1100 volt grade electric LT UG cable with aluminium conductor of size 16 Sqmm 4 Core laid in trenches/along the wall/pole including making good the disturbed surfaces of walls/floor etc all connections, Complete all as specified and directed by Engineer-in-Charge. |
| 101 | Supply & Fixing of GI steel tubing light grade 50mm dia for laying in ground and road crossing along the pole in coping etc for cable protection including necessary fittings, clamps for supports, etc., including making good the disturbed surfaces of walls/floor etc ., Complete all as specified and directed by Engineer-in-Charge. |
| 102 | Supply and laying 50 /38 mm Double Walled Corrugated (DWC) Pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS14930 (Part-II) for protection of UG cables, laid in trenches/ road/ drain or fixed along wall, poles or laid under floor, Complete all as specified and directed by Engineer-in-Charge. |
| 103 | Material & Labour for cutting existing road/hard standing not exceeding 45cm x 45 cm in wide & depth getting out excavated material for laying cable/GI tube, returning filling & well rammaing wateringfinish suraface 10 cm from top using PCC 1:3:6; including removal of surplase soil, Complete all as specified and directed by Engineer-in-Charge. |
| 104 | Cutting the 50mm bore CI/DI pipes and reducing the required length before laying for inserting of new CI specials such as Tees/Reducers/Tail pieces/collers/sluice valve/Air release valve etc., Complete all as specified and directed by Engineer-in-Charge. |
| 105 | Supplying and laying of CPVC pipes of 32mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenches & fitting on walls, ceiling or floors, Complete all as specified and directed by Engineer-in-Charge. |
| 106 | Supply & fixing CPVC 32mm dia. ball valve, Complete all as specified and directed by Engineer-in-Charge. |
| 107 | Material & Labour for Construction of brick masonary valve pit complete including necessary excavation and earth work complete all as specified with internal dimension 60cm x 60cm x 60cm (type \"B\") including MS sheet cover 3mm thick welded with hinges on angle iron frame 50x50x6mm with hold fast grouted in 100mm thick, PCC (1:2:4) type B-1 coping on top of brick wall including necessary locking arrangement, Complete all as specified and directed by Engineer-in-Charge. |
| 108 | Supply & Fixing of LED recessed / surfaced mountedlight fitting 1 x 36W LED (4000K),with higher efficiency, full diffuser, providing uniform light including making connections with 2 core flexible copper 0.50 Sqmm from false ceiling after fixing fitting, Complete all as specified and directed by Engineer-in-Charge. |
| 109 | Supply and fixing BEE star rated ceiling fan 1200mm sweep and connecting up to and includingprovision of 23/0.0076 flexible three core PVC insulated copper conductor cable from ceiling rose to fan etc., Complete all as specified and directed by Engineer-in-Charge. |
| 110 | Supply & Fixing AC single phase Kwh meter with LCD display class 1.0, 240vols, 50 HZ, 5-30A Max continuous current 600% of basis conforming to IS -13779 and relevant IEC standards, Complete all as specified and directed by Engineer-in-Charge. |
| 111 | Material & Labour for sub-main wiring with two single core 4 Sqmm PVC (FRLS) insulated multi-stranded flexible copper conductor cable 660/1100 volts grade down in through including concealed PVC conduit with all accessories, PVC insulated 2.5 Sqmm single core single strand copper conductor as continuous earth wire in green colour connected to common earth dolly, Complete all as specified and directed by Engineer-in-Charge.(Notes:- Two runs of cable, one run of earth wire, one run of PVC conduit will bemeasured as one unit.) |
| 112 | Supply and fixing modular fan regulator, 120 watt, 2 module (ISI marked), Complete all as specified and directed by Engineer-in-Charge. |
| 113 | Supply & Fixing MCB DB 12 way SPN, (Acrylic door), IP 43 “Weather proof” Concealed/ Surface mounted and making good the disturbed surfaces of walls/ceiling/floor etc. complete with all accessories, main switch and connecting the cables with proper, Complete all as specified and directed by Engineer-in-Charge. |
