Tender For Renovation Of Existing Mangrove Forest Rest House Under Baratang Forest Division
Tender Value
35.49 Lakhs
Estimated cost
Bid Submission
30 Dec 2024
0 days left
EMD
70996
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
baratang → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Existing Mangrove Forest Rest House Under Baratang Forest Division
BOQ
| Sl. No. | Item Description |
| 1 | Removing whiteor colour wash by scrapping and sand preparing the surface smooth including necessary repairs to scratches etc. complete |
| 2 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : |
| 3 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 4 | Grinding of wood and finishing by angle grinder using 125mm sand paper of grit size 80 and hand paper of grit size 120. |
| 5 | French spirit polishing |
| 6 | Two or more coats on new works including a coat of wood fille |
| 7 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : |
| 8 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks |
| 9 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 10 | Providing and fixing up to floor five level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete |
| 11 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 12 | 12 mm cement plaster |
| 13 | 1:4 (1 cement : 4 coarse sand) |
| 14 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 15 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 16 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing |
| 17 | Rectangular shape 453x357 mm |
| 18 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete - 100 nn dia |
| 19 | Sand cast iron S& S waste and vent pipe |
| 20 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 21 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 22 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet |
| 23 | 100 mm diameter |
| 24 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms |
| 25 | Providng and fixing wall mixture for hot and cold water of approved quality. |
| 26 | Providing and fixing 5ltr capacity geyser of approved quality. |
| 27 | Providing and fixing health faucet of approved quality |
| 28 | 12 mm cement plaster finished with a floating coat of neat cement of mix |
| 29 | 1:4 (1 cement:4 fine sand) |
| 30 | Providing and fixing modern/ western floor mounted white vitreous chinawith attached cistern 5 trap including flush pipe, with manually controlled device (handle lever) conforming to IS:7231 with all fittings and fistures inlcuding an dmakein good the wall and floors wherever required. |
| 31 | Removal of Tiles for wall and floor all complete as per direction of Engineer-In-Charge |
| 32 | Providing and fixing Ist quality ceramic glazed wall tiles conforming toIS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. |
| 33 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm includingpointing the joints with white cement and matching pigment etc.,complete. |
| 34 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) |
| 35 | Second class teak wood |
| 36 | Panelling with 12mmplywood on wooden frame on walls including all fittings complete as per direction of Engineer-In-Charge |
| 37 | Providing and fixingtempered 6mm thickness glass on wooden frame all complete as per direction of Engineer-In-Charge |
| 38 | Applying priming coat |
| 39 | With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 41 | Twoor more coat on new work |
| 42 | Providing and fixing internal electrical installation for 05 Room including reception, Dinning space, Kitchen with corridoor with required fitting (square light, fan, exhaust fan, mirror light,) and fixture of approved brand and manufacture with providing of Air Conditioner 1.5Ton 05 Nos and 2 Ton 02 Nosall works complete as per specification and direction of Engineer-in-charge |
| 43 | Providing and fixing ofCPVCBrass Elbow 3/4\" x1/2\" approved good quality and complete the works |
| 44 | Providing and fixing ofBrass Tee3/4\" x1/2\" approved good quality |
| 45 | Providing and fixing of CPVC Pipe 3/4 of 5mtr length ofapproved good |
| 46 | Providing and fixing ofCPVC Elbow 3/4\" approved good quality |
| 47 | Providing and fixingCPVC Tee3/4\" of approved good quality. |
| 48 | Providing and fixing Reducer Tee 1x 3/4\" approved good quality and complete the works |
| 49 | Providing and fixing PVC Connector Pipe (60 cm) lenght approved good quality. |
| 50 | Providing and fixing CP Angular Cock approved good quality |
| 51 | Providing and fixing CP pillar cock of approved quality |
| 52 | Providing and fixing Tissue paper stand pillar cock of approved quality |
| 53 | Providing and fixing Hand Shower set of approved quality |
| 54 | Providing and fixing CPVC Plain FTA 1 X 1\" approved good quality and complete the works |
| 55 | Providing and fixing of CPVC Pipe 1 \"for 5mt length approved good quality. |
| 56 | Providing and fixing of CPVC Pipe 2 \"for approved good quality. |
| 57 | Providing and fixing syntex nipple 2\" approved good quality and complete the works |
| 58 | Providing and fixing CPVC Plain FTA 2\" approved good quality. |
| 59 | Providing and fixing 2\" CPVC union socket of approved good quality. |
| 60 | Providing and fixing 2\" CPVC bendof approved good quality |
| 61 | Providing and fixing 20mm CPVC Teeof approved good quality. |
| 62 | Providing ofCPVC Reducer2 x 1\" approved good quality |
| 63 | Providing and fixing BrassBall Valve 2\" approved good quality and complete the works |
| 64 | CPVC Brass MTA 1\" approved good quality and complete the works |
| 65 | Providing and fixing 1.5 feet acrylic shelf with edges round off supported on anodised aluminum angle frame and gurad rail complete fixed with 40mmlong screws rawl plugs etc. complete. |
| 66 | Providing and fixing CPVCTee 1\" x1\"approved good quality and complete the works |
| 67 | Providing and fixing ofCPVC Elbow 1\"x1\" approved good quality |
| 68 | Providing and fixing ofCPVC Foot Valve1 1/2\" approved good quality and complete the works |
| 69 | Providing and fixingKitchen Sink Cock (wall mount) approved good quality and complete the works |
| 70 | Providing and fixing CPVC Solvent resistancefrom corrosionof approved quaity(200ml) |
| 71 | Providng Thread Sealtape good quality with good tightness |
| 72 | Providing and fixing C. P. Jally 4\" made fromstainless steel of approved quality |
| 73 | Providing and placing on terrace (at all floor levels) 500 litres capacitymarked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 74 | Insallation of1 Hp Pump with all acessories |
| 75 | Providing of S.S.Clamp 2\" |
| 76 | Providing of S.S.Screws |
AI Tender Summary
Tender Timeline
Dec 13, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedDec 30, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 30, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender