Tender For Provn Of Parking Shed For Specialist Vehicles At Mtti In Af Station Under Ge Avadi
Tender Value
79 Lakhs
Estimated cost
Bid Submission
09 Jan 2025
0 days left
EMD
1.44 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
avadi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provn Of Parking Shed For Specialist Vehicles At Mtti In Af Station Under Ge Avadi
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Dec-2024 | Corrigendum Sketch | Other | 02-Jan-2025 |
| 2 | 02-Jan-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-Jan-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE \"A\" PART I Note: This schedule is not pre-priced by MES. |
| 2 | Designing, Fabricating, Supply erecting and construction of PEB Steel structure with plinth area 299.00 Sqm (04 baysof each with clear size (5.00 x 13.90) Mtr , plinth height 0.60mtr and clear height of 5.50 Mtr from finished floor level of PEB structure as per IS 800: 2007, IS 875 & IS 801 with permanent specifications . The rate quoated is inclusive of following:-(a) Site clearance. (b) Soil investigation to arrive at desired foundation depth by bore hole of min 10m depth or N value 50 which ever is earlier, including vetting of report from NIT / IIT / Govt Recognised Engineering Colleges. |
| 3 | (c) Design and execution of foundation footing , pedestal, column, plinth beam etc in design Mix M-30 including reinforcement including vetting of design from NIT / IIT / Govt Recognised Engineering Colleges. (d)Design and fabrication ofMS stanchion as in column including foundation bolts and nutscomplete structure painted with Epoxy DTM paint etc all as specified including vetting of design from NIT / IIT / Govt Recognised Engineering Colleges. |
| 4 | (e) Design and fabrication ofrafters, purlins, prepainted galvalume sheet roofing including500mm roof projection allround painted with Epoxy DTM paint etc all as specified including vetting of design from NIT / IIT / Govt Recognised Engineering Colleges. (f) Design and fabrication ofvally gutters , Wall clading for three sides , Front side full opening with 1.2m width fabricated chajja projection at level as directed .(g) Moorum filling in plinth (height of plinth 600mm) (h) 100mm thick DLC lean concrete(j) 400 micron thick HDPE sheet min weight 390gm / Sqm(k) 10mm thick sand cushion of clear river sand spread evenly(l) PQC flooring of flexural strength 45 Kg / sqcmof 250mm depth completeall as specified and as directed by the GE |
| 5 | Sch \"A\" Part II List of items to be quoted by Contractor |
| 6 | Supply and fix LED building security light fitting 25W made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, complete pre-wired and connecting up with suitable twin core flexble copper wireincluding provision of necessary GI tubing medium grade 25mm bore of pipe 1.5 bent to shape with necessary clamps made out of mild steel, nuts and bolts etc., including two coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surface for fixing the fitting to Bldg etc complete all as specified and as directed.Make : Make :-Havells /Bajaj/Crompton |
| 7 | Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6mm thick, buried directly in ground vertically at a depth not less than 2.25m deep below normal ground level with top edge of the plate not less than 1.5m below normal ground level surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt, filling in alternate layerand electrode connections by using galvanised iron earth lead wire 4mm dia connected by means of bolts, nuts, checknuts and washers made ofgalvanised iron or steel and protected by 15mm dia GI pipe mediumgrade upto a length of 7.5m connected to main switch board or main control board and 20mm dia GI light grade watering pipe including funnel, wire mesh,complete all as per plate No. 5 of SSR Part I. |
| 8 | Notes for srl item No2.2The rates quoted inclusive ofnecessaryearth work and excavation in any type ofsoil,plain cementconcrete1:3:6,typeC1 chamber,reinforcedcement concretecover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm diaTMT barsat140mmcentreto centrebothways, lugsincluding testing complete all as specified and as directed. |
| 9 | Lumpsum price worked out by the tenderer for \"INTERNAL ELECTRIC SUPPLY\"as listed in Schedule ‘A’ Part-II |
| 10 | Lumpsum price worked out by the tenderer for \"HARDSTANDING AND RAMP\"as listed in Schedule ‘A’ Part-III |
| 11 | Lumpsum price worked out by the tenderer for\"EXTERNAL ELECTRIFICATION\"as listed in Schedule ‘A’ Part-IV |
| 12 | Lumpsum price worked out by the tenderer for \"AREA DRAIANAGE \" as listed in Schedule ‘A’ Part-V |
AI Tender Summary
Tender Timeline
Jan 02, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 02, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jan 09, 2025
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 09, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 11, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender