Tender For Creation Of Integrated Material Handling Facility (Imhf) At Nd (Mbi)

Sharing tender

Creation Of Integrated Material Handling Facility (Imhf) At Nd (Mbi)-GENERAL SUMMARYNOTE: Schedule ‘A’ Part - I to XVII are prepriced by MES under Ser No. 2.00to 10.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only. 2 Lumpsum price worked out by the contractor for “BUILDINGS/STRUCTURES” as listed in Schedule ‘A’ Part - I , inserted by MES. 3 Lumpsum price worked out by the contractor for “EARTHWORK & SITE CLEARANCE” as listed in Schedule ‘A’ Part - II , inserted by MES. 4 Lumpsum price worked out by the contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - III, inserted by MES. 5 Lumpsum price worked out by the tenderer for INTERNAL WATER SUPPLYas listed in Schedule ‘A’ Part-IV, inserted by MES. 6 Lumpsum price worked out by the tenderer for ROAD, PATH AND HARD STANDING as listed in Schedule ‘A’ Part- V, inserted by MES. 7 Lumpsum price worked out by the tenderer forSEWAGE DISPOSAL as listed in Schedule ‘A’ Part- VI, inserted by MES. 8 Lumpsum price worked out by the tenderer forAREA DRAINAGE as listed in Schedule ‘A’ Part- VII, inserted by MES. 9 Lumpsum price worked out by the tenderer for EXTERNAL ELECTIRFICATION as listed in Schedule ‘A’ Part- VIII, inserted by MES. 10 Lumpsum price worked out by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part- IX, inserted by MES. 11 Lumpsum price worked out by the tenderer for FIRE FIGHTING as listed in Schedule ‘A’ Part- X, inserted by MES. 12 Lumpsum price worked out by the tenderer for WATER COOLER as listed in Schedule ‘A’ Part- XI, inserted by MES. 13 Lumpsum price worked out by the tenderer for HEATING, VENTILATION & AIR CONDITIONING as listed in Schedule ‘A’ Part- XII, inserted by MES. 14 Lumpsum price worked out by the tenderer for LIFT - PASSENGER & GOODS as listed in Schedule ‘A’ Part- XIII, inserted by MES. 15 Lumpsum price worked out by the tenderer for FIRE ALARM & PUBLIC ADDRESS SYSTEM as listed in Schedule ‘A’ Part- XIV, inserted by MES. 16 Lumpsum price worked out by the tenderer for LIGHTNING PROTECTION as listed in Schedule ‘A’ Part- XV, inserted by MES. 17 Lumpsum price worked out by the tenderer for CCTV SYSTEM as listed in Schedule ‘A’ Part- XVI, inserted by MES. 18 Lumpsum price worked out by the tenderer for DEMOLITION & DISMANTLING as listed in Schedule ‘A’ Part- XVII, inserted by MES. 19 Subtotal 20 NOTE:Schedule ‘A’ Part - XVIII (miscellaneous) arenot prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6. 21 INTERNAL ELECTRIFICATION 22 Supply and fixing of Industrial luminaire- 40W LED complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size 23 Supply and fixing of Industrial luminaire- 20W LED complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size 24 Supply and fixing of Surface mounted Round luminaire- 12W LED complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size 25 Supply and fixing of Highbay luminaire - 120W LED complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. 26 Supply and fixing of Highbay luminaire - 80W LED. complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. 27 Supply and fixing of Aviation lighting fixture complete in all respectwith all assories as required. 28 Supply and fixing of Fire Exit Sign (illuminated)with LED,with upto 3 Hrs Battery Backup.Exit Sign 29 Supply and fixing WALL FAN ( 450MM sweep) complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. 30 Supply and fixing Flameproof WALL FAN ( 450MM sweep) complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. 31 Supply and fixing 6 way, single pole and neutral, sheet steel, MCB distribution board, 240 volts,with 200 Amps rated bus bar double door on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 32 S&L Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole 32 Amp MCB 33 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray corrosion resistent polyester flame retardent (Galvanisation thickness not less than 50 microns) withperforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required of following sizes:- 34 100 mm width X 50 mm depth X 1.6 mm thickness 35 150 mm width X 50 mm depth X 1.6 mm thickness 36 300 mm width X 50 mm depth X 1.6 mm thickness 37 450 mm width X 50 mm depth X 2.0 mm thickness 38 600 mm width X 75 mm depth X 2.0 mm thickness 39 750 mm width X 75 mm depth X 2.0 mm thickness 40 900 mm width X 75 mm depth X 2.0 mm thickness 41 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 42 Telephone socket outlet 43 RJ 45 cat 6 jack point 44 INTERNAL WATER SUPPLY 45 Providing and fixing white vitreouschina Floor mountedwatercloset of size 360x650x800 mm of approved shapeincluding providing and fixing vitreouschinacistern with duel flush fitting, of flushing capacity 3 litre/6litre (adjustable to 4litre/8litre, including seat cover, and cistern fitting, nuts, boltsand gasket etc complete. Make: Jaquar OPS-WHT-15751UFP ,Cistern-OPS-WHT-15201 46 Providing & Fixing white vitreous china wash basin forundercounter mounting, specially fabricatedbrackets, painted white, Brass Tap, 32mm C.P.waste,connection pipe & rubber adopter for waste connection, complete including cutting and making good thewalls, wherever required Complete in all respect..Wash Basin : Jaquar -Cat No :- CNS-WHT-705 & 15mm C.P. brass tap (Make - Jaquar, FLR - 5011N) 47 Providing and fixing white vitreous china Battery based infrared sensor operated urinal of approx. size 485x 310 x 710 mm having pre & post flushing with water (250 ml &500 ml consumption ), having water inlet from back side, including fixing to wall with suitablebrackets all as per manufacturers specification and direction of Engineer- in- charge. Make: Jaquar -Cat No :- URS-WHT-13255 48 Providing and fixing stainless steel sink with drain board withC.I. brackets, duly painted white 40mm C.P. waste,C.P. brass chain and rubber plug, rubberadapterfor waste connection complete including cuttingandmaking goodthe walls wherever required. Make - Jayana, Jupiter CAT No. - SBSD 11 (DX), Glossy 49 Providing and fixingBottle trap for wash basin with 25mm minimum water seal,complete including cutting and making good thewalls, wherever required Complete in all respect. Make - Jaquar, CAT No.- ALD-769L 50 Providing and Fixing ofP.V.C wasteFlexible pipe 40 mm dia for sink and Urinalincluding PVC waste fittings complete including cutting and making good thewalls, wherever required Complete in all respect. 51 Providing and Fixing C.P brass towel rail complete with C.P brass brackets fixed to wooden cleats with C.P. brass screws. Make - Jaquar (Continental), CAT No.- ACN-1101N 52 Providing & fixing uplasticised PVC connection pipe of 45 cm long and 15 mm bore with brass unions 53 Providingand fixing C.P. brass angle valve 15mm diafor basin mixer and gyser points of approved quality conforming to IS : 8931. Make - Jaquar, CAT No. - FON-40053 54 Providing and fixing C.P brass toilet paper holder .Make :- Jaquar, CAT No.:- ACN-1155N 55 Providing & fixingLiquid soap containerof standard shapewith bracket of the same material with snap fitting of approved quality and colour. Make - Jaquar, CAT No.- CAN-1135N 56 Providing & fixing 15 mm bore Sink cock of approved quality and colour. Make - Jaquar, CAT No.- 5309N 57 Providing & fixingCP brass Health faucet with 1.5M S.S. Flexible Tube with wall hook including screws, nut, bolts, cutting wall/floor and making good the same whatever required Complete in all respect.Make :- Jaquar, Allied, CAT No.- ALD-573 58 Providing and Fixing C.P. Brass bib cockincluding wall fange, connections, screws, nut, bolts, cutting wall/floor and making good the same whatever required Complete in all respect. Make - Jaquar, CAT No.- FLR 5037N 59 Providing & Fixing C.P. wall mount double Robe Hook fixed to wooden cleats with C.P. brass screws, cutting wall/floor and making good the same whatever required Complete in all respect. Make :-Jaquar, CAT No.- CAN-1161N 60 Providibng and fixing straight type Macfit single body push fit type WC pan connector with factory supplied spring loaded seal guard of McAlpine, UK with integral single mould sealing fins made of flexible EVA body, including bush/adaptor for use with C.I. Pipe as supplied with the pan connector Complete in all respect. Make MacAlpine Model No MAC 1 61 Providing & Fixing hand drier of best quality, to be operated with 230 volts, single phase, with fully hygienic condition, with all accessories including cutting and making good the walls, wherever required. 62 Supply, installation , testing commissioning of PP 110 mm dia (Polyproplene) Mineral rainforced low noise Soil & Waste solution as per EN 12056 and DIN 1986-100, with density 1.9 g/cm3.Along with new patented blue seal elastomeric seal is made from EPDM (EN 681-1) PP mineral(Astolan) filled Low noise system should has a fire classification DIN 4102-B2/EN13501 . Product should have a chemical resistance of pH 2-12 and is a complete sound protection system according to DIN 4109. Sound levels of not more than 16DB(A) as per VDI 4100 at a flow rate of 4 l/s Fire Behavior - class D s3 do. As per EN 1350 1-1 and B2(Normal flammable) according to DIN 4102-1. Working temperature -20° to 90° in continuous flow. including with push fit rubber ring sockets all necessary fittings and specials such as Bends, junctions, offsets & vent cowl. Fixing at wall/ceiling level supported by rubber line bracket & hangers etc.(Make-Wavin) 63 Supply, installation , testing commissioning of PP (Polyproplene)40/50 mm OD Pipes Mineral rainforced low noise Soil & Waste solution as per EN 12056 and DIN 1986-100, with density 1.9 g/cm3.Along with new patented blue seal elastomeric seal is made from EPDM (EN 681-1) PP mineral(Astolan) filled Low noise system should has a fire classification DIN 4102-B2/EN13501 . Product should have a chemical resistance of pH 2-12 and is a complete sound protection system according to DIN 4109. Sound levels of not more than 16DB(A) as per VDI 4100 at a flow rate of 4 l/s Fire Behavior - class D s3 do. As per EN 1350 1-1 and B2(Normal flammable) according to DIN 4102-1. Working temperature -20° to 90° in continuous flow. including with push fit rubber ring sockets all necessary fittings and specials such as Bends, junctions, offsets & vent cowl. Fixing at wall/ceiling level supported by rubber line bracket & hangers etc. .(For Indirect waste/ Wash Basin/Floor Drain ) (Make-Wavin) 64 Providing and fixing Floor Trap with minimum 50mm water seal with rubber seal on inlet to push fit hopper for indirect waste connections . (110 mm inlet & 110 mm outlet Long ht) 65 Providing and fixing110 x 50mm Floor Drain / Plain Floor trap complete in all respects. 66 Providing and fixing clean out cap plug (FCO /COP ) 110 mm diafor cleaning of same material. (Make-Wavin) 67 ROAD PATH & HARD STANDING 68 M & L 150 mm thick (compacted thickness) WMM in two 75mm thick each layers with laying, sporeading (with paver finisher only) and compacting base course of graded stone aggregate and granular material confirming to MORT&H specifications (Table 400-II) in layers of equal compacted thickness each, consolidateed, incl pre-mixeing the material with water of OMC in mechanical mixer (Pug Mill), carrage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/base course and compacting with power vibratory roller to achieve the desired density complete as per MORT & H specification clause-406 incl all material, labour, machinery, lighting, guarding and maintenance of diversion . 69 EXTERNAL ELECTRIFICATION 70 HT 6.6KV/11KV Dual voltage HT VCB , 3 phase 50 Hz, indoor type, totally enclosed metal clad switchgear complete with Vacuum Circuit Breaker having rupturing capacity 350 MVA,overload and earth fault protection, ammeter, voltmeter and of rating upto 630 Amp with and including following:-. 71 One (1) Nos. 6.6KV/ 11KV 630 Amps. 350MVA, 18.6kA for 1sec. Electrically/ manually operateddraw out type vacuum circuit breaker complete with trip free spring charged closing mechanism, necessary auxiliary relays, control switches, emergency hand trip devices and mechanical ON / OFF indicator etc. 72 One (1) Multifunction Meter showing all Electrical Paramater ie Volt, Ampere, kw, kVA, P.F., kWH etc. 73 One (1) digital type ammeter with 6.6KV/ 11kV Cast resin CTs for metering (50/25 /5-5A, CL- 1, 15VA) with ASS and 2 Amp SP MCB. 74 One (1) voltmeter (0-15KV) with VSS. 75 One (1) Set of phase indication lamps with 2Amp SP MCB for protection (Red, Yellow and Blue). 76 One (1) set of Red/ Green indicating lamp for close and open position. 77 One (1) No. amber indicating lamp for auto trip. 78 One (1) No. clear indicating lamp for trip circuit healthy. 79 One (1) blue indicating lamp for spring charged. 80 One (1) strip heater to prevent absorption of moisture. 81 One (1) set of 3 O/C + 1E/F (with High Set) Neumerical Relay with 3 Nos. 6.6KV/ 11kV Resin Cast CTs 50/25/5-5A, CL 10P10, 15VA. 82 Master Trip Relay. 83 Trip circuit supervision relay 84 One (1) No. Potential Transformer 6.6KV/11KV/√3/110/√3 100VA burden 85 One (1) set of 3Element 24V DC Aux. Relay with H/R flag for tripping of Transfomer Fault ie. OTI, WTI & Buchholz Tripping. 86 One (1) set of 3Element 24V DC Aux. Relay with H/R flag for Alarm of Transfomer Fault ie. OTI, WTI & Buchholz Alarm. 87 One (1) set of 8 Stage 24V DC Annunciator with builtin test/Accept/ Reset Push Button along with 24V DC Hooter. 88 Master Trip Relay. 89 12 Window Annunciator 90 Auxiliary switch/relay, master trip, anti pumping relay Trip circuit supervision relayand other control relays etc. as per requirements. 91 Power Pack : 92 One (1) Set 230V A.C, / 24V DC, Battery Backup, Power Pack to operate atleast 5Nos. Operation without AC Supply. 93 6.6KV/11KV DUAL VOLTAGE HT VCB ( Modification & providing VCB at IN-3 Existing substation for New Facility IMHF) 94 Note: -a)Do the site Visit to check the suitability at site.b) Make & Provide the necessory links for connction of new VCB. 95 HT 6.6KV/11KV Dual voltage , 3 phase 50 Hz, indoor type, totally enclosed metal clad switchgear complete with Vacuum Circuit Breaker having rupturing capacity 350 MVA,overload and earth fault protection, ammeter, voltmeter and of rating upto 630 Amp with and including following:-. 96 One (1) Nos. 6.6KV/ 11KV 630 Amps. 350MVA, 18.6kA for 1sec. Electrically/ manually operateddraw out type vacuum circuit breaker complete with trip free spring charged closing mechanism, necessary auxiliary relays, control switches, emergency hand trip devices and mechanical ON / OFF indicator etc. 97 One (1) Multifunction Meter showing all Electrical Paramater ie Volt, Ampere, kw, kVA, P.F., kWH etc. 98 One (1) digital type ammeter with 6.6KV/ 11kV Cast resin CTs for metering (50/25 /5-5A, CL- 1, 15VA) with ASS and 2 Amp SP MCB. 99 One (1) voltmeter (0-15KV) with VSS. 100 One (1) Set of phase indication lamps with 2Amp SP MCB for protection (Red, Yellow and Blue). 101 One (1) set of Red/ Green indicating lamp for close and open position. 102 One (1) No. amber indicating lamp for auto trip. 103 One (1) No. clear indicating lamp for trip circuit healthy. 104 One (1) blue indicating lamp for spring charged. 105 One (1) strip heater to prevent absorption of moisture. 106 One (1) set of 3 O/C + 1E/F (with High Set) Neumerical Relay with 3 Nos. 6.6KV/ 11kV Resin Cast CTs 50/25/5-5A, CL 10P10, 15VA. 107 Master Trip Relay. 108 Trip circuit supervision relay 109 One (1) No. Potential Transformer 6.6KV/11KV/√3/110/√3 100VA burden 110 One (1) set of 3Element 24V DC Aux. Relay with H/R flag for tripping of Transfomer Fault ie. OTI, WTI & Buchholz Tripping. 111 One (1) set of 3Element 24V DC Aux. Relay with H/R flag for Alarm of Transfomer Fault ie. OTI, WTI & Buchholz Alarm. 112 One (1) set of 8 Stage 24V DC Annunciator with builtin test/Accept/ Reset Push Button along with 24V DC Hooter. 113 Master Trip Relay. 114 12 Window Annunciator 115 Auxiliary switch/relay, master trip, anti pumping relay Trip circuit supervision relayand other control relays etc. as per requirements. 116 Power Pack : 117 One (1) Set 230V A.C, / 24V DC, Battery Backup, Power Pack to operate atleast 5Nos. Operation without AC Supply. 118 Supplying ,Assembling , erecting, testing and commissioning of 1500KVA 6.6KV-11KV/0.433KV Dual voltage 3phase 50Hz, indoor type copper wound, Dry type cast resin step down transformer complete with all modern fittings asgivenin the specifications including , lifting lugs, Roller type bi-directional wheels, suitable boxes on both the ends for cable entry & bus duct,winding temprature indication & alarm, earthing terminals, diagram and rating plat etc. as required with followins:- 119 6.6KV-11KV/433V Dual voltage distribution transformer shall be a part of packaged substation which will be housed in the enclosure. The transformers shall be installed in hot, humid tropical atmosphere. All equipment accessories and wiring shall be provided with tropical finish to prevent fungus growth 120 The transformers shall be dry Type & capable of continuous operation of rated output under the operating conditions of voltage and frequency variations as per statutory limits governed by relevant Indian Standard and Indian Electricity Rules, 1956 / IEC with latest amendments in force. 121 Requirement: 6.6KV-11KV/433V Dual voltage dry type cast resin with OFF LOAD Tap Changer(OCTC), Tapping range +5% to -7.5% in steps of 2.5% (HV side), neutral air cooled, double copper wound, core type suitable for packaged substation housed in a enclosure. 122 Voltage Ratio: No load voltage 11000/433volts within tolerance as stipulated in latest IS standard. 123 Insulating material shall be of proven design. The insulating materials shall be class “F” 124 Rating: The transformer shall have a continuous rating as specified at any of the specified tapping position and with the maximum temperature rise specified. 125 Temperature Rise: The maximum temperature rise at the specified maximum continuous output shall not exceed 40°C by thermometer of winding above ambient temperature of 50°C. 126 Type of Load: The transformer shall be suitable for carrying unbalanced load up to 90% load within temperature rise indicated in the Indian Standard specification ‘Guide for loading of dry Transformer 127 Overloads: The transformers shall be suitable for carrying overload within temperature rise indicated in IS ‘Guide for Loading of dry transformer’. 128 Connections:H.V. Delta and L.V Star connected with neutral brought out on the secondary side for connection to earth; Vector group DYn11 of IS:2026 129 Each 6.6KV-11KV/433V Dual voltage Step down transformers shall be provided with the following fittings and accessories: Rating diagram and terminal marking plate for transformer 130 Lifting lugs for transformer 131 Bi-directional Rollers 132 Rating diagram and terminal marking plate for transformer 133 Earth terminals (2 Nos) for body earthing for transformers 134 Inspection door for access to terminal connections for transformers 135 Suitable cable termination arrangement for M.V. side with extended Bus bars for cables or Bus duct connection and cable box terminations on H.V. Side, suitable for 3Cx 240/300sq. mm 11 K.V. XLPE Aluminum Conductor cable. 136 Necessary hardware, clamps, lugs etc. for terminations of H.V. Cables on HV side and cable termination on M.V. Side. 137 Winding temperature indicator with contacts for remote alarm and tripping. 138 SAFETY EQUIPMENTS 139 Supply & fixing of Carbon dioxide (CO2) type fire extinguisher with suitable base pipe & horn (conforming to IS 2876 with cylinders fully charged of capacity 9.0 Kgm). 140 Supply & fixing ofCarbon dioxide (CO2) type fire extinguisher with suitable base pipe & horn (conforming to IS 2876 with cylinders fully charged of capacity 4.5 Kgm). 141 Supply & fixing of G.I buckets of followings capacity paint and written with white paint Fire and mounted on M.S. angle iron bracket of sizes 50 mm x 50 mm x 6 mm thick and 500 mm long including grouting in wall etc. as required including filling with dry sand 9 ltr capacity. 142 Supply of First aid box as approved by St. John Ambulance Brigade/Indian Red Cross Conforming to IS:2217 - 1963. 143 Supply & fixing of Shock treatment chart at least in three languages duly mounted on a wooden frame with glass as required. 144 Supply of Elastomeric mat 2 mm thick to withstand 1.1KV dielectric strength as per IS 15652/2006. 145 MV DISTRIBUTION PANELS & BOARDS 146 Material & Labour for design, Supply, fabrication, Installation, testing & commitioning factory made, LT panel board 415 Volt AC 3 phase, 50Hz, indoor type, totally enclosed, dust & vermin proof, suitably ventilated, floor mounted, 415Volts, 3 phase & Neutral, 50Hz, AC supply system, fully compartmentalized, both side openable,fabricated out of 2 mm CRCA sheet steel, protection of enclosure IP-54 as per IS : 2147 with pre- treatment and powder coated of approved colour including suitable size of angle iron/ Flat iron, front opening type with provision of cable entry, with proper frrrule and cable glands, internal wiring with PVC insulated multi stranded copper conductor FRLSH cable of adequate size ( minimum 1.5Sqmm), required civil works/ anchoring bolts for fixing, PCC foundation etc. with and including following:BUS BAR CHAMBER: Electricity grade copper shrouded busbar capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears, fixed on DMC insulators and provision of exension. 147 Incomer:1500KVA Transformer rating 148 1 No. 2500 A, 415V, 50kA (Ics=Icu=Icw =50 KA for 1 second), 4 Pole, Electrical draw out type,Micro-processor based release (for over current, Earth fault and short circuit protections) A.C.B.with all indications, metering, protections, push buttons etc. complete in all respects as mentioned in specifications and as required. each feeder shall have following: 149 Digital flush type class-1.0 accuracy multifunction meter showing V, A,PF,KVAR , KWH, Frequency / Harmonics etc. with 3 Nos. current transformers of 2500/5 ratio, 15 VA Class 1.0 metering. 150 6 nos NO/NC contacts for remote opening & closing. 151 Red/Green/Amber ON/OFF/TRIP indicating lamps with 2A SP MCB backup protection. 152 1 set of three phase indicating lamps along with 2A SP MCB backup protection. 153 Spring charge& DC supply healthy indicating lamp with 2A SP MCB backup protection. 154 Separate set of Class 5P10, 15VA CT of suitable capacity for protection/Capacitor Panel 155 24 V DC Shunt trip coil. 156 Motor wound spring closing mechanism. 157 Control MCB, control terminals& wiring as required. 158 7 mode surge suppression with suitable rating fuses & base complete as required. 159 Restricted Earth fault relay with 3 Nos. current transformers of 2500/5 ratio, 15 VA Class 5P 10 160 Undervoltage, Overvoltage & phase reversal relay for persisted voltage of 105-180% & 20-95% of rated voltage. 161 All outgoing feeders shall be provided with one set of three phase R,Y,B indicating lamps along with 2A SP MCB backup portection and 1 Set of ON/OFF/Trip indicating lamps . 162 Incomer:750KVA DG set rating 163 1 No. 1250 A, 415V, 50kA (Ics=Icu=Icw =50 KA for 1 second), 4 Pole, Electrical draw out type,Micro-processor based release (for over current, Earth fault and short circuit protections) A.C.B.with all indications, metering, protections, push buttons etc. complete in all respects as mentioned in specifications and as required. each feeder shall have following: 164 Digital flush type class-1.0 accuracy multifunction meter showing V, A,PF,KVAR , KWH, Frequency / Harmonics etc. with 3 Nos. current transformers of 1250/5 ratio, 15 VA Class 1.0 metering. 165 6 nos NO/NC contacts for remote opening & closing. 166 Red/Green/Amber ON/OFF/TRIP indicating lamps with 2A SP MCB backup protection. 167 1 set of three phase indicating lamps along with 2A SP MCB backup protection. 168 Spring charge& DC supply healthy indicating lamp with 2A SP MCB backup protection. 169 Separate set of Class 5P10, 15VA CT of suitable capacity for protection/Capacitor Panel 170 24 V DC Shunt trip coil. 171 Motor wound spring closing mechanism. 172 Control MCB, control terminals& wiring as required. 173 Restricted Earth fault relay with 3 Nos. current transformers of 2500/5 ratio, 15 VA Class 5P 10 174 All outgoing feeders shall be provided with one set of three phase R,Y,B indicating lamps along with 2A SP MCB backup portection and 1 Set of ON/OFF/Trip indicating lamps . 175 Bus Coupler: 176 1 No. 25000 A, 415V, 50kA (Ics=Icu=Icw =50 KA for 1 second), 4 Pole, Electrical draw out type,Micro-processor based release (for over current, Earth fault and short circuit protections) A.C.B.with all indications, metering, protections, push buttons etc. complete in all respects as mentioned in specifications and as required. each feeder shall have following: 177 6 nos NO/NC contacts for remote opening & closing. 178 Red/Green/Amber ON/OFF/TRIP indicating lamps with 2A SP MCB backup protection. 179 Spring charge& DC supply healthy indicating lamp with 2A SP MCB backup protection. 180 24 V DC Shunt trip coil. 181 Motor wound spring closing mechanism. 182 Control MCB, control terminals& wiring as required. 183 All outgoing feeders shall be provided with one set of three phase R,Y,B indicating lamps along with 2A SP MCB backup portection and 1 Set of ON/OFF/Trip indicating lamps . 184 Bus Bars: 185 A set ofTPN Aluminum bus bars rated for 3000A (after considering all necessary deratings) 3 phase 4wire, 50Hz. A minimum derating factor of 0.75 must be taken for calculation of bus bar sizes. The bus bar size after derating shall be equal to the ampere given in the BOQ The conductivity of bus bar shall not be less than 58% and earth bus size shall be 10% of phase bus bar. (50kA) 186 Outgoings : 187 All outgoing shall have Ics = 50 KA (As per SLD) 188 1 Nos. TPN feeder having 1600A TPN MDO ACB, ON /OFF/TRIP indication, 1 no. digital MFM (showing all parameters) and matching cast resin CTs with control MCB. 189 2 Nos. TPN feeder having 1250A TPN MDO ACB, ON /OFF/TRIP indication, 1 no. digital MFM (showing all parameters) and matching cast resin CTs with control MCB. 190 1 Nos. TPN feeder having 1000A TPN MDO ACB, ON /OFF/TRIP indication, 1 no. digital MFM (showing all parameters) and matching cast resin CTs with control MCB. 191 1 Nos. TPN feeder having 630AMCCB, ON /OFF/ TRIP indication, 1 no. digital MFM (showing all parameters) and matching cast resin CTs with control MCB. 192 2 Nos. TPN feeder having 400AMCCB, ON /OFF/ TRIP indication, 1 no. digital MFM (showing all parameters) and matching cast resin CTs with control MCB. 193 1 Nos. TPN feeder having 250AMCCB, ON /OFF/ TRIP indication, 1 no. digital MFM (showing all parameters) and matching cast resin CTs with control MCB. 194 9 Nos. TPN feeder having 100AMCCB, ON /OFF/ TRIP indication, 1 no. digital MFM (showing all parameters) and matching cast resin CTs with control MCB. 195 2 Nos. vacant space suitable for TPN feeder having 250AMCCB. 196 Other items such as 197 1 Lot of control wiring 198 1 Set of designation plates 199 MAIN LT PANEL Described as above. 200 Smart Hybrid Active Filter 500A AHF + 700 KVAr @ 440V Detuned Capacitor Bank 201 INDOOR DUTY 202 Design, Manufacturing, Supply, installation,Testing and commissioning of Smart Hybrid Active Filter to achieve Pf > 0.99 Lag and TDDi values within IEEE 519-2014 recommended limits. The degree of protection of enclosures system shall be IP30. The switching device of the active compensation system shall be IGBT based. The active compensation system specifications are mentioned below. The active compensation system should do the Pf correction as a 1st Priority and 2nd Priority as harmonics compensation (remaining capacity after Pf correction). Response time shall be 100 micro Sec or less. The passive part switching device shall be contactor based. The entire system should work in an integrated manner with a single controller. 203 Make: Inphase/ schnieder/ ABB 204 Technical specification : 205 Electrical Characteristics 206 Connection method -3‐Ph-3‐Wire System 207 Network Voltage - 415V 208 Permissible Voltage Variation +/-10% 209 Ampere Rating - 500A AHF 210 IGBT Connection Topology -3 Level Topology 211 System Frequency -50 Hz (+/- 5%) 212 Equipment Efficiency - 98% of the equipment power typically 213 Compensation Modes - Closed Loop 214 Reaction time - 0.1 ms (Instantaneous) 215 Response time - 1 ms 216 Harmonics Compensation - Resource Delivery from 3rdto 61stOrder Harmonics Compensation 217 Modularity - Maximum 32 units can be combined 218 Internal Protection- Main breaker 219 Programming/Communication Characteristics 220 Communications -Mod bus 221 Programming Interface -Using IPC Manager (7‐Inch Colour Touch Screen Graphical User Interface ‐ GUI) 222 Redundancy -Master/master arrangement 223 Reactive Power range- ‐100% inductive to +100% capacitive of the rated kVAr 224 Auxiliary PF Setting -Programmable as per the Site conditions 225 Target cos pi - Programmable from 0.6 (inductive) to 0.6 (capacitive) 226 Harmonics Selection - 20 Selectable Harmonics 227 Installation Aspects(Per unit) 228 Ingress Protection (IP) IP‐30 229 Altitude - Up to 1000m 230 Ambient Temperature - 0 to +50°C (Derating after +40°C) 231 Humidity - Maximum 95% RH, Non‐condensing 232 Cooling Arrangements - Forced‐air cooling 233 CT Requirements - 3 CTs (class 1.0 or better) with sufficient VA Burden 234 SPECIAL FEATURES FOR LONGER LIFE OF ACTIVE PART 235 DC Capacitors Used in DC Link - FILM TYPE DC CAPACITORS 236 PWM Reactors - Foil Type reactors specially designed with Multiple Airgaps 237 INPUT FILTER - RC TANK as per requirement with Mandatory LCL Filter 238 Controller Design - Rugged Design with Multiple I/Os 239 IGBT Max Junction Temperature - 175 Degree Centigrade 240 Capacitor Panel Specification 241 Voltage Variation: +/-10% 242 Rated Frequency: 50 Hz (+/- 5%) 243 Capacitor Rated Voltage: 525V 244 Capacitor Output Voltage: 440V 245 Capacitor Unit Type: MPP Heavy Duty Capcaitor 246 Switching Device: Contactor Switched (AC-3) 247 Capacitor Panel KVAr - 700 KVAr @ 440V 248 Step Size with KVAR rating - (7 x 100KVAr) 249 Step protection Back-up Protection - Each step with MCCB protection 250 Ambient Condition - Indoor 10°C to 50°C, 60% Relative humidity, non-condensing 251 Reactor Rating: Detuned Series 14% reactor Aluminum wound with Class H insulation. 252 POWER DISTRIBUTION BOARDS & PANELS 253 Supplying, installation, testing & commissioning of 415V, 3 Phase, 50 Hz., 4 wire system, sheet steel clad, dust and vermin proof cubical and Indoor type floor/ wall mounted, free standing extendible type power distribution boards/ Panels compartmentalized design and fabricated out of 2 mm CRCA sheet steel complete with Aluminium Bus bars, Electrical interlocks as per the various status of all the equipments indicated on the drawings. Providing & Fixing of base plate / channel, P/F the following Switchgears, complete with earth Bus bar throughout the length of the panel, terminal arrangement for Cables incomings / Outgoings from Top / Bottom as per drawings and as approved by consultant / Engineer incharge, The incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement, detachable gland plates, adequate size cable alley, Sign writing, Painting, Earthing, Numbering, Danger plate etc. complete as required as per specifications and drawing attached with and including following:- 254 MAIN LIGHT & POWER PANEL (ELECTRICAL ROOM) 255 INCOMING: 256 1 No. TPNIncomer feeder having 630A 4P MCCB (25kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 257 BUSBAR: 258 One set of TPN, AL bus bar rated 800 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 259 OUTGOINGS: MCCB Ics-25kA & MCB as per specified 260 3 Nos. TPN feeder having 200ATPN MCCB, ONindication with MFM with all parameters & matching cast resin CTs & control MCB. 261 2 Nos. TPN feeder having 160ATPN MCCB, ON indication with MFM with all parameters & matching cast resin CTs & control MCB. 262 2 Nos. TPN feeder having 125ATPN MCCB, ONindication with MFM with all parameters & matching cast resin CTs & control MCB. 263 4 Nos. TPN feeder having 100ATPN MCCB, ON indication with MFM with all parameters & matching cast resin CTs & control MCB. 264 6Nos. TPN feeder having 63A TPN MCB C curve, ONindication with MFM with all parameters & matching cast resin CTs & control MCB. 265 Other items such as 266 1 Lot of control wiring 267 1 Set of designation plates 268 Complete panel Described as above. 269 FLOOR DISTRIBUTION BOARDS(FDBs) 270 Supplying, installation, testing & commissioning FDBs (floor distrubitin boards)of 415V, 3 Phase, 50 Hz., 4 wire system, sheet steel clad, dust and vermin proof cubical and Indoor type wall mounted extendible type power distribution boards/ Panels compartmentalized design and fabricated out of 2 mm CRCA sheet steel complete with Copper Bus bars, Electrical interlocks as per the various status of all the equipments indicated on the drawings. Providing & Fixing of base plate / channel, P/F the following Switchgears, complete with earth Bus bar throughout the length of the panel, terminal arrangement for Cables incomings / Outgoings from Top / Bottom as per drawings and as approved by consultant / Engineer incharge, The incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement, detachable gland plates, adequate size cable alley, Sign writing, Painting, Earthing, Numbering, Danger plate etc. complete as required as per specifications and drawing attached. 271 FDB - 1 272 INCOMING: 273 1 No. TPNIncomer feeder having 100A 4P MCCB (18kA) & ON/OFF indications. 274 BUSBAR: 275 One set of TPN, CU bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 276 OUTGOINGS: MCB as per specified 277 3Nos. TPN feeder having 20A 4P MCB C 278 1Nos. SPN feeder having 40A DP MCB C 279 2Nos. TPN feeder having 40A 4P MCB C 280 2Nos. SPN feeder having 63A DP MCB C 281 Other items such as 282 1 Lot of control wiring 283 1 Set of designation plates 284 Complete panel Described as above. 285 FDB - 2 286 INCOMING: 287 1 No. TPNIncomer feeder having63A 4P MCB (10kA) & ON/OFF indications. 288 BUSBAR: 289 One set of TPN, CU bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 290 OUTGOINGS: MCB as per specified 291 1Nos. TPN feeder having 20A 4P MCB C 292 2Nos. SPN feeder having 40A DP MCB C 293 4Nos. TPN feeder having 40A 4P MCB C 294 Other items such as 295 1 Lot of control wiring 296 1 Set of designation plates 297 Complete panel Described as above. 298 FDB - 3 299 INCOMING: 300 1 No. TPNIncomer feeder having 125A 4P MCCB (18kA) & ON/OFF indications. 301 BUSBAR: 302 One set of TPN, CU bus bar rated 200 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 303 OUTGOINGS: MCB as per specified 304 2Nos. SPN feeder having 32A DP MCB C 305 1Nos. SPN feeder having 40A DP MCB C 306 3Nos. TPN feeder having 63A 4P MCB C 307 Other items such as 308 1 Lot of control wiring 309 1 Set of designation plates 310 Complete panel Described as above. 311 FDB - 4 312 INCOMING: 313 1 No. TPNIncomer feeder having63A 4P MCB (10kA) & ON/OFF indications. 314 BUSBAR: 315 One set of TPN, CU bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 316 OUTGOINGS: MCB as per specified 317 4Nos. SPN feeder having 40A DP MCB C 318 4Nos. TPN feeder having 40A 4P MCB C 319 2Nos. SPN feeder having 63A DP MCB C 320 Other items such as 321 1 Lot of control wiring 322 1 Set of designation plates 323 Complete panel Described as above. 324 FDB - 5 325 INCOMING: 326 1 No. TPNIncomer feeder having63A 4P MCB (10kA) & ON/OFF indications. 327 BUSBAR: 328 One set of TPN, CU bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 329 OUTGOINGS: MCB as per specified 330 4Nos. SPN feeder having 32A DP MCB C 331 2Nos. SPN feeder having 40A DP MCB C 332 4Nos. TPN feeder having 40A 4P MCB C 333 Other items such as 334 1 Lot of control wiring 335 1 Set of designation plates 336 Complete panel Described as above. 337 FDB - 6 338 INCOMING: 339 1 No. TPNIncomer feeder having63A 4P MCB (10kA) & ON/OFF indications. 340 BUSBAR: 341 One set of TPN, CU bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 342 OUTGOINGS: MCB as per specified 343 3Nos. TPN feeder having 40A 4P MCB C 344 3Nos. SPN feeder having 63A DP MCB C 345 Other items such as 346 1 Lot of control wiring 347 1 Set of designation plates 348 Complete panel Described as above. 349 FDB - 7 350 INCOMING: 351 1 No. TPNIncomer feeder having 200A 4P MCCB (18kA) & ON/OFF indications. 352 BUSBAR: 353 One set of TPN, CU bus bar rated 250 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 354 OUTGOINGS: MCB as per specified 355 9Nos. SPN feeder having 40A DP MCB C 356 5Nos. TPN feeder having 40A 4P MCB C 357 2Nos. TPN feeder having 63A 4P MCB C 358 Other items such as 359 1 Lot of control wiring 360 1 Set of designation plates 361 Complete panel Described as above. 362 FDB - 8 363 INCOMING: 364 1 No. TPNIncomer feeder having 100A 4P MCCB (18kA) & ON/OFF indications. 365 BUSBAR: 366 One set of TPN, CU bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 367 OUTGOINGS: MCB as per specified 368 1Nos. SPN feeder having 20A DP MCB C 369 4Nos. SPN feeder having 32A DP MCB C 370 7Nos. SPN feeder having 40A DP MCB C 371 2Nos. TPN feeder having 40A 4P MCB C 372 Other items such as 373 1 Lot of control wiring 374 1 Set of designation plates 375 Complete panel Described as above. 376 FDB - 9 377 INCOMING: 378 1 No. TPNIncomer feeder having 125A 4P MCCB (18kA) & ON/OFF indications. 379 BUSBAR: 380 One set of TPN, CU bus bar rated 200 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 381 OUTGOINGS: MCB as per specified 382 2Nos. SPN feeder having 32A DP MCB C 383 6Nos. SPN feeder having 40A DP MCB C 384 3Nos. TPN feeder having 40A 4P MCB C 385 1Nos. SPN feeder having 63A DP MCB C 386 Other items such as 387 1 Lot of control wiring 388 1 Set of designation plates 389 Complete panel Described as above. 390 FDB - 10 391 INCOMING: 392 1 No. TPNIncomer feeder having 100A 4P MCCB (18kA) & ON/OFF indications. 393 BUSBAR: 394 One set of TPN, CU bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 395 OUTGOINGS: MCB as per specified 396 1Nos. SPN feeder having 32A DP MCB C 397 1Nos. TPN feeder having 32A 4P MCB C 398 3Nos. SPN feeder having 40A DP MCB C 399 3Nos. TPN feeder having 40A 4P MCB C 400 Other items such as 401 1 Lot of control wiring 402 1 Set of designation plates 403 Complete panel Described as above. 404 FDB - 11 405 INCOMING: 406 1 No. TPNIncomer feeder having 160A 4P MCCB (18kA) & ON/OFF indications. 407 BUSBAR: 408 One set of TPN, CU bus bar rated 250 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 409 OUTGOINGS: MCB as per specified 410 2Nos. SPN feeder having 32A DP MCB C 411 7Nos. SPN feeder having 40A DP MCB C 412 7Nos. TPN feeder having 40A 4P MCB C 413 Other items such as 414 1 Lot of control wiring 415 1 Set of designation plates 416 Complete panel Described as above. 417 FDB - 12 418 INCOMING: 419 1 No. TPNIncomer feeder having 200A 4P MCCB (18kA) & ON/OFF indications. 420 BUSBAR: 421 One set of TPN, CU bus bar rated 250 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 422 OUTGOINGS: MCB as per specified 423 1Nos. SPN feeder having 32A DP MCB C 424 4Nos. SPN feeder having 40A DP MCB C 425 7Nos. TPN feeder having 40A 4P MCB C 426 4Nos. SPN feeder having 63A DP MCB C 427 Other items such as 428 1 Lot of control wiring 429 1 Set of designation plates 430 Complete panel Described as above. 431 FDB - 13 432 INCOMING: 433 1 No. TPNIncomer feeder having 200A 4P MCCB (18kA) & ON/OFF indications. 434 BUSBAR: 435 One set of TPN, CU bus bar rated 250 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 436 OUTGOINGS: MCB as per specified 437 1Nos. SPN feeder having 32A DP MCB C 438 10Nos. SPN feeder having 40A DP MCB C 439 6Nos. TPN feeder having 40A 4P MCB C 440 1Nos. SPN feeder having 63A DP MCB C 441 Other items such as 442 1 Lot of control wiring 443 1 Set of designation plates 444 Complete panel Described as above. 445 LT XLPE CABLES 446 Supply, laying, testing, commissioning of LT cables complete with end termination; Aluminium thimbles for aluminium conductor cables and copper thimbles for copper conductor cables of 1100 V grade aluminium / copper conductor (as specified below) extruded XLPE with insulated PVC innersheath, unarmoured / GI wire/tape armoured (as specified below) and outer PVC sheathed cable of IS- 7098 standard of following sizes in trenches, cable racks or trays or pipes, including supply of GI clamps and screws and providing aluminum cable tags at every 20 metres and at both termination points, including unloading and transportation of cables at site, unpacking, complete of following sizes:- 447 3Corex6 sq. mm stranded copper conductor armoured cable 448 4Corex4 sq. mm stranded copper conductor armoured cable 449 4Corex6 sq. mm strandedcopper conductor armoured cable 450 4Corex10 sq. mm stranded copper conductor armoured cable 451 Horizintal boring of size 200mm dia for laying passing of PVC insulated and PVC sheathed / XLPE power cable with supply & laying of 150mm HDPE pipe complete in all respect including removal earth/debrish to a distance exceeding 50mtr and not exc 100 mtr. 452 Supply, Installing & commissiong of micro processor /DSP controlled 20 KVA UPS,True Online Double Conversion VFI Technology UPS (High Frequency PWM using IGBT technology) , working in hot standby mode, 3 Phase input and 3 phase 415 V output UPS system; Power Factor 0.8 and each comprising of the following: 453 100% rated Rectifier cum charger unit +100% rated Invertor, Integrated in UPS module 454 100% rated Inbuilt static switch at the invertor output + No. 100% rated Inbuilt static switches at the static bypass line. 455 100% rated Inbuilt Maintenance Bypass. 456 100% rated battery circuit breaker 457 The UPS shall run in hot standby mode 458 Inbuilt Isolation Transformer 459 Battery bank,Sealed Maintenance Free (SMF) batteries for 20kVA UPS System to provide 30 minutes backup timeat full load with suitable no. of batteries having Total VAH required per 20kVA UPS = 38400with interconnectors, Rack and accessories and UPS to battery DC cable upto 5 meters. (Make: Exide/ Quanta ) for Battery and Pegasus,GE,APC, Schneider, Eaton for UPS 460 CABLE DISMENTLLING & HANDING OVER 461 Dismantling of under ground cables HT & LT cable system including terminations and disconnection for repair/ replacement etc. or depositing to MES store (spare/components for replacement to be provided free by department if any) 462 EXTERNAL WATER SUPPLY 463 Construction of masonry valve Chamber 90x90x100 cm inside, with common burnt clay brick in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. 464 Domestic Water Supply Pump (Hydropneumatic System With Fixed Speed System) 465 Providing, fixing and testing of packaged fixed skid mounted hydropneumatic system comprising of :- 466 Vertical, inline multistage centrifugal pumping set with stainless steel SS-304stage casing and SS-304 impellers with stainless steel SS-316L shaft as per IECstandards and GJL250 cast iron suction& discharge casing, connected to TEFC ventilated induction motor of2 pole, 2900rpm, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. 467 Pressure vessel of non corrosiveFRP composite construction lined with NSF and/or FDA listed material,likehigh density polyethylene with fully replaceable polyurethane. Air cell burstpressure of minimum of 5 times the vessel operating pressure and cycle tested for 2,50,000 cycles. 468 No. and capacity of Pressure Vessel – 01 Nos. x 100 Ltrs 469 Control Panel with programmable logic controller (PLC) for cyclic operation of pumps. Pump workingsequence should change after every operation.Contractor overload relays and MCBs should confirm to IEC 898 – 1995/ specifications. Blinking indications for pumps start, trip, low level trip, health supply should be provided in the panel along with the ammeter& voltmeter. Control panel should also consist of cooling fan. 470 Pressure switches bellowtypefittedwithmicro switch and having maximum pressure and differentialscaleshould confirming BS-6134 standards and IP55 protection class. 471 Stainless steel suction and delevery header,ball valve on each pump on section delivery side, non return valves, Y stainer complete in all respect. 472 Ball valves tobe used should be Hot Pressed brass OT-58withstainless steelballand P.T.F.Eseal and O-Ring. NRVs to be used shouldbewithSpringsandO-Ring arrangement. 473 Complete set system tobemountedona commonbase frameand shallfollow following duty. 474 For DomesticWater Supply 475 (1working + 1 stand by) 476 Capacity: 200 lpm 477 Head: 70 m 478 Drainage Sump Pumps- Submersible pumps for basement drainage & Pump Room drainage. 479 Submersible single stage single entry pumps with C.I.body and C.I. two vane enclosed type impeller connectedto TEFC submersible motor for 415 volts, 3 phase, 50 cycles including MCC panel with level controllers, auto control, sequential change over facility with one proper working at low level & two proper working at high level with an audible alarm including all interconnectivity cables, with both pumps connected to common outlet header including valves, non return valves, lifting chains etc. complete in all respect 480 (one working + one standby/both working in high flow conditions 481 For Basement Drainage 482 (Solid handiling capacity 12mm) 483 Capacity- 250 lpm (Each) 484 Head- 15 m 485 Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre shall be fabricated out of 14 gauge CRCA sheet steel in form in 3b formation with reinforcement of suitable size angle iron, channel ‘T’ sections irons and /or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system.Approval shall be taken for each panel before fabrication. Cadmium Plated hardware shall be used in fabrication of panels. Quoted rates shall inclusive of cables, cable trays, earthing (in accordance to specification) with earthing from panel to each motor / equipment. 486 MCC for Plumbing system 487 Incoming 488 1 Nos. 100A, 4P MCCB, 35KA, thermal magnetic based release (Ics = Icu = 100%) withwith O/L , S/C & E/F protection as per specification and with following accessories 489 1 No. Digital MFM meter and 3 nos. CTs of ratio 100/5A , Class I accuracy and 10 VA burden. digital multifunction meter suitable to measure voltage, Ampere, Frequency, Power Factor with RS-485 Port 490 1 Set of ON/ OFF/TRIP Indicating LED Lamps with 2 Amp MCB. 491 1 Set of phase indicating LED lamps with 2 amp back up MCB. 492 Bus Coupler 493 1 No. 100A, 4P MCCB, 35KA, thermal magnetic based release (Ics = Icu = 100%) withwith O/L , S/C & E/F protection with1 Set of ON/ OFF Indicating LED Lamps with 2 Amp MCB. 494 Bus Bar 495 4P copper bus bars of 125A capacity with heat shrinkable coloured sleeves and i/c, SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of 35 KA for 1 sec. 496 Outgoings 497 2 No. MPCB of 32 Amp. i/c 1.1 KW DOL starter and providing outgoing feeder of 3 core, armoured coper cable of size of 6 Sq. mm to Domestic Transfer pump (including 1 No. as standby).Each compartment shall contain auto / manual selector swtich and indicating and pushbutton lamps etc. as required. 498 40 amps 4P MCCB 2 Nos. 499 Necessary cable alleys, internal wiring, and interlocking, earthing for all equipment shall also be included. 500 Notes : 501 a. All MPCBs shall be of 35 KA breaking capacity and suitable for motor duty application. 502 b. Provision shall be made to ensure system protection from dry running of the pump 503 c. All incomers and Buscoupler breakers shall be electrical and mechanical interlocked with suitable accessories. 504 d. 2 Nos. Type-2 SPD 65kA 4P with1No. Red Indicator Light for SPD with 1Set. SPD Back up fuse 1P 50A 20kA including all necessary accessories. 505 For Plumbing System as described above. 506 Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre shall be fabricated out of 14 gauge CRCA sheet steel in form in 3b formation with reinforcement of suitable size angle iron, channel ‘T’ sections irons and /or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system.Approval shall be taken for each panel before fabrication. Cadmium Plated hardware shall be used in fabrication of panels. Quoted rates shall inclusive of cables, cable trays, earthing (in accordance to specification) with earthing from panel to each motor / equipment. 507 MCC for Plumbing system 508 Incoming 509 1 Nos. 100A, 4P MCCB, 35KA, thermal magnetic based release (Ics = Icu = 100%) withwith O/L , S/C & E/F protection as per specification and with following accessories 510 1 No. Digital MFM meter and 3 nos. CTs of ratio 100/5A , Class I accuracy and 10 VA burden. digital multifunction meter suitable to measure voltage, Ampere, Frequency, Power Factor with RS-485 Port 511 1 Set of ON/ OFF/TRIP Indicating LED Lamps with 2 Amp MCB. 512 1 Set of phase indicating LED lamps with 2 amp back up MCB. 513 Bus Coupler 514 1 No. 100A, 4P MCCB, 35KA, thermal magnetic based release (Ics = Icu = 100%) withwith O/L , S/C & E/F protection with1 Set of ON/ OFF Indicating LED Lamps with 2 Amp MCB. 515 Bus Bar 516 4P copper bus bars of 125A capacity with heat shrinkable coloured sleeves and i/c, SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of 35 KA for 1 sec. 517 Outgoings 518 2 No. MPCB of 32 Amp. i/c 1.1 KW DOL starter and providing outgoing feeder of 3 core, armoured coper cable of size of 6 Sq. mm to Domestic Transfer pump (including 1 No. as standby).Each compartment shall contain auto / manual selector swtich and indicating and pushbutton lamps etc. as required. 519 40 amps 4P MCCB 2 Nos. 520 Necessary cable alleys, internal wiring, and interlocking, earthing for all equipment shall also be included. 521 Notes :i). All MPCBs shall be of 35 KA breaking capacity and suitable for motor duty application.ii) Provision shall be made to ensure system protection from dry running of the pumpiii) All incomers and Buscoupler breakers shall be electrical and mechanical interlocked with suitable accessories.iv) 2 Nos. Type-2 SPD 65kA 4P with1No. Red Indicator Light for SPD with 1Set. SPD Back up fuse 1P 50A 20kA including all necessary accessories.For Plumbing System as described above. 522 FIRE FIGHTING (EXTERNAL) 523 SITC Fire pump diesel engine driven horizontal end suction,entrifugal type confirming to IS- 12469 1988 with CI casing , bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for continuous operation with range of operation 0 % to 150 % of rated capacity, 2850 LPM at outlet head of130 mts 524 SITC Fire pump electrically driven horizontal end Suction, centrifugal type confirming to IS- 12469 :1988 with CI Casing , bronzeimpeller and Stainless steel shaft mountedon heavy duty bearings Suitable for continuous operation with range of operation 0 % to 150 % of rated capacity for 440 V , 3 Phase. 50 Hz.2850 LPM at outlet head of130 mts 525 SITC Jockey pump horizontal end suction centrifugal type Confirming to IS- 12469: 1988 with CI casing , bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for automatic operation with nonover loading power characteristics for frequent start / stop operations for 440 V , 3 phase, 50 Hz 130 m head 180 LPM discharge 526 Providing & fixing MS Class ‘C’ diesel engine exhaust pipe (including all fittings, clamps, steel support) of suitable dia for the engine. The pipe shall be provided with 12 mm thick supercera ceramic fibre rope 527 Providing, laying, jointing and testing in trenches the following sizes of MS class `C (heavy class) pipes conforming to IS:1239 with accessories like fittings including tees, elbows, reducers, flanges, rubber gaskets, GI nuts, bolts and washers including excavation in all kind of soil, refilling, ramming, shoring,removing the excavated surplus material, providing adequate support to the pipe and making good the same complete as required. Rate shall include for dewatering necessary to execute the work. The pipe shall not be less than 1.0 m below ground level at any point. Pipes shall be embedded all around 150 mm thick compacted rilver sand and providing protection toembedded MS pipesandfittingsbyapplying pyp kote primer (@ 100 gm/sqm) thereafter wrapping 4 mm thick pyp kote (AW 4 mm) protection coating by thermo fusion process. Overlap shall be maintained at 15 mm. The application process shall be strictly according to manufacturer’s specification of following sizes:- 528 (a) 80 mm dia 529 (b) 100 mm dia 530 (c) 150 mm dia 531 Providing & fixing GM fire brigade suction hose coupling (draw-out connection) with nut for female coupling as per IS standards complete with 100 mm dia GI suction pipe and 100 mm dia foot valve (to be connected to static tank). Provision of GI drop pipe and foot valve shall be made in all the fire water static storage tanks (2 Nos) (GI pipe to be paid separately through appropriate item while cost of foot valve to be included). 532 Providing and fixing angle iron (40mmx40mmx5mm) door frame and S.S. sheet (2mm thick) cum glass shutter of size 2.1mtrx0.9mtr(N.S.) with 25mmx25mmx3mm angle frame all around and stiffened in between including hinges, handle, locking arrangement, painting with approved synthetic enamel paint including sign writing on glass at internal hydrant including providing & fixing S.S. sheet 2mm thick on remaining portion above door to close opening including painting etc. as required. Glass shall be 6 mm thick.The cabinet shall be suitable to accommodate 2 nos. or 4 nos 15mtr long Hose pipe & 2 Nos branch pipe nozzle. It shall be mounted on raised Brick platform complete as required.(Cost shall be inclusive of providing break glass box containing key for the cabinet along with hammer). 533 PORTABLE CHEMICAL FIRE EXTINGUISHERS 534 Supply, installation, testing and commissioning of following types of extinguisher with provision of wall bracket (fixed with anchor fastner). 535 ISI marked (IS:2878) Fire Extinguisher, Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 filled to a filling rate of not more than 0.667 and wall suspension bracket. 536 ABC (Powder Type) Fire Extinguisher 6 Kg . In HP Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and confoming to IS:1349-1993 537 CO2 type fire extinguishers consisting of welded M.S. cylindrical body automatic modular CO2 type extinguisher actuated through a sprinkler head mounted on The extinguisher body finished externally with red enamel with trolly mounted complete with internal charge.(Capacity 22.5 Kg.) 538 Providing and fixing Clean Agent Modular (ceiling mounted) Type Capacity 5 Kg CE certified Fire Extinguisher filled with HFC 236FAClean Agent Gas. Complete in all respect. 539 SPRINKLER SYSTEM 540 Providing & fixing of 15 mm dia.sprinkler head with standard responseQuartzoid Bulb operate at 57 degree C complete with all accessories as required and as per enclosed specification (UL Listed) Upright/Pendent type in chrome finish (StandardCoverage) 541 Providing & fixing brass quartzoid sprinklers (UL, FM approved) of 15 mm dia size, suitable for sustaining the seat & water hammer effect. The type & temperature rating shall be as follows Sidewell extended coverage (57 deg.C) sprinkler quick response type as per specifications. 542 Providing and fixing reinforced neoprene rubber vibration eliminators/expansion joints (to provide relief from stresses at pipe flanges) suitable for upto 20 kg/cm2 pressure, complete as perspecification of following sizes:- 543 150mm dia. 544 100 mm dia. 545 Providing & fixing of 25mm dia. gunmetal air release valve with all fittings and forged ball valve on header complete as required and as per enclosed specification. 546 WATER COOLER/PURIFIER 547 Supply & installation RO+UV+Uf water purifier facilitates a flow rate of up to 50 litres/hour with TDS Controller with following parameters. 548 Purification Production Rate - 50 L/hr, Maximum Duty Cycle - 250 L/Day,Filter Cartridge - Sediment,Activated Carbon,UF,Post Carbon,Body Material - ABS Food Grade Plastic,Membrane Type - Thin Film Composite RO (2),UF Membrane - 0.1 - 0.01 Micron,Auto Flushing System - Yes,Min. /Max. Operating pH - 6.5-8.0 549 HEATING VENTILATION & AIR CONDITIONING 550 Supply, Installation, Testing and Commissioning of AHRI Certified Water Cooled Screw chiller with VFD each having a minimum Actual capacity of 220 TRat chilled water inlet/outlet temperature of 54°F/44°F with chilled water circulation rate of 528 USGPM and condenser water inlet/outlet temperature of 90°F/100°Fwith water circulation rate of 880 USGPM , suitable for operation on refrigerant R-134a for screw type machine each comprising of the following complete as per specifications and as required. Quoted price shall include price of Variable Frequency Drive starter of suitable capacity (Chiller shall have compressor of same OEM make) 551 Twin rotor based semi-hermetic type single/ multiple horizontal compressor complete with automatic capacity control from100%-20%, safety switches, forced feed lubrication system etc, as per specifications 552 Suitable capacity squirrel cage induction motor with class B insulation suitable for operation on 400+/-10% volts, 50Hz, A.C. supply. 553 Unit mounted IP 54 rated VFD Starter of suitable capacity 554 Necessary drive arrangement. 555 1 set - Lubrication device consisting of automatic electric oil pump, oil cooler, head tank, oil strainer, and automatic pressure regulating valve, oil heater, oil heater thermal switch etc. as per specifications. 556 1 no. - matching shell and tube type even pass water cooled condenser of M.S. shell and integrally finned copper tubes and pressure drop not exceeding 10 metres. 557 1 no. - matching shell & tube flooded/falling film type even water pass chiller for screw type units of MS shell and copper tubes and pressure drop not exceeding 10.0 metres 558 Evaporator and condenser shall be manufactured, tested and stamped with ASME(U) pressure vessel code. 559 1 Lot - Refrigerant piping fittings, valves and accessories to inter connect compressor, condenser, chiller and expansion valve. 560 1 set - Microprocessor based control panel complete with accessories as per specifications. 561 Lot - Refrigerant line accessories comprising of safety valves, angle valve, liquid line indications, liquid level control etc. 562 Lot - Water flow switches at outlet of condenser & chiller, water drain, air purge valves, thermometers and pressure gauges wherever required. 563 Lot - Suction line and chiller insulation with minimum 19 mm thick polyvinyl nitrile rubber insulation complete as required. 564 Lot- Frame work for mounting the above condenser, chiller compressor and motor with base plate complete with anti-vibration pads/springs. 565 Lot- Initial/first charge of refrigerant gas & compressor oil shall be factory charged and cost for the same shall be included in the quoted rate 566 Lot- RCC / cement concrete foundation for the chilling unit. 567 Chilling machine described above, as per specifications and complete in all respects for the operating parameters as given under. 568 Refrigerant should be R-134a 569 At least one Chiller shall be tested at 4 points at 100%, 75%, 50% and 25% at AHRI conditions at manufacturer test bed before despatch. 570 Chiller 571 Chiller Water IN 54°F 572 Chilled Water OUT 44°F 573 Chilled water Flow528 USGPM 574 Fouling Factor 0.0005 FPS 575 Condenser 576 Condenser Water IN 90°F 577 Condenser Water Flow 100°F 578 Condenser water Flow 880 USGPM 579 Fouling Factor0.001 FPS 580 Minimum COP at AHRI Conditions = 6.20 min. 581 IKW/TR at Full Load = 0.66 max. 582 NPLV at design conditions not exceeding 0.37 IKW/TR 583 IPLV at AHRI conditions not exceeding 0.35 IKW/TR 584 Manufacturer’s AHRI Certified Selection Performance Sheet to be submitted to evaluate and verify the specified performance parameters 585 Thechillingmachine as describedaboveshall bein line with specifications 586 220 TR 587 PUMPING SYSTEM 588 Chilled Water Pumps 589 Primary constant chilled water pumps 590 Supply, installation, testing and commissioning ofPN16 rated Vertical Inline Split Coupled (with rigid aluminium alloy couplingbetween pump shaft and motor shaft) single stage centrifugal pump each capable of delivering the specified flow rate comprising the following and complete as per specifications. 591 Casing (Volute) - Cast Iron. 592 Impeller - Gunmetal Bronze- Statically and Dynamically Balanced 593 Casing Gasket - Confined Non Asbestos Fiber 594 Pump Shaft - SS416. 595 Flush Line - Braided Stainless Steel 596 Mechanical Seal - Outside Balanced (the pump design shall meet the requirement of servicing / changing the mechanical sealwithout disturbing the pump shaft alignment) 597 Motor Type - TEFC Squirrel Cage, Efficiency Class - IE2, Insulation - Class F, 415V ± 10% , 50Hz± 5%, 3Ø AC Power Supply 598 Vertical Inline Split Coupled PN16 centrifugal pump. 599 Right angle Suction guide with inbuilt guide vanes & strainer of Cast Iron body.To be supplied by pump manufacturer for unit responsibility. 600 Flow rate 528 USGPM and 15 METER head 601 Secondary Variable chilled water pumps 602 Supply, installation, testing and commissioning ofPN16 rated Vertical Inline Split Coupled (with rigid aluminium alloy couplingbetween pump shaft and motor shaft) single stage centrifugal pump each capable of delivering the specified flow rate comprising the following and complete as per specifications 603 Casing (Volute) - Cast Iron. 604 Impeller - Gunmetal Bronze- Statically and Dynamically Balanced 605 Casing Gasket - Confined Non Asbestos Fiber 606 Pump Shaft - SS416. 607 Flush Line - Braided Stainless Steel 608 Mechanical Seal - Outside Balanced (the pump design shall meet the requirement of servicing / changing the mechanical sealwithout disturbing the pump shaft alignment) 609 Motor Type - TEFC Squirrel Cage, Efficiency Class - IE2, Insulation - Class F, 415V ± 10% , 50Hz± 5%, 3Ø AC Power Supply 610 VFD - Integrated Mounted over Pump motor for sensorless/ wireless DPT control with IP-55 Protection,Integrated fliter to meet EN61800-3 for RFI Control, Integrated DC link Reactor equivalent in performance to a 5% AC line reactor. The VFD LCD should display the dynamic head & flow rate at any point of operation. 611 Flow rate 528 USGPM and 30 METER head 612 CONDENSOR WATER PUMPS 613 Supply, installation, testing and commissioning ofPN16 rated Vertical Inline Split Coupled (with rigid aluminium alloy couplingbetween pump shaft and motor shaft) single stage centrifugal pump each capable of delivering the specified flow rate comprising the following and complete as per specifications.Casing (Volute) - Cast Iron.Impeller - Bronze- Statically and Dynamically BalancedCasing Gasket - Confined Non Asbestos FiberPump Shaft - SS416.Flush Line - Braided Stainless Steel 614 Mechanical Seal - Outside Balanced (the pump design shall meet the requirement of servicing / changing the mechanical sealwithout disturbing the pump shaft alignment) 615 Motor Type - TEFC Squirrel Cage, Efficiency Class - IE3, Insulation - Class F, 415V ± 10% , 50Hz± 5%, 3Ø AC Power Supply 616 Capacity of each pump (LPM) 2495 617 Pump Head (Mt)25 618 Pump Efficiency Not less than 75% 619 Maximum Permissible Speed 1450 RPM 620 HP of Motor30 621 COOLING TOWERS 622 Supply,installation, testing &commissioning of FRP induced draft cooling tower of capacity 275 TR (831600 Kcal/Hr) complete with sump & steel ladder, EFF 2 type fan motors suitable for 415 V, 3 phase, 50 Hz. MS Structure for mounting Cooling Tower, access arrangement for cooling tower interior, cement concrete foundation, stel / masonry support structure, anti vibration mountings etc all as specified and as directed by Engineer-In-Charge.(2Working +1 Stand By) 623 Sound Level75dB at 1Mt 624 Inlet Water Temperature 36.39 °C 625 Outlet Water Temperature32.22 °C 626 HP of C/T Fan Motor 2 x 7.5HP 627 HOT WATER BOILER SUITABLE FOR OUTSIDE CONDITION 628 Supply, installation, testing and commissioning of Electric Hot Water Generator of vertical construction equipped with sufficient number of flanges and electric immersion heaters. The pressure vessel shall be constructed as per ASME standards and insulated on all sides with 50 mm thick fiberglass with 0.60mm Aluminum cladding as per specifications. The hot water generator shall be equipped with all automatic and safety controls such as high temperature water thermal cutout, Low water level cut-off, PLC, HMI other controls . The hot water generator shall be control by PLC based Step controller and HMI screen and BMS compatible having Ethernet/RS485 Port. All basic controls and terminals shall be located in an integral control cabinet factory wired and tested. The hot water generator shall be suitable for 415 volts,50 Hz, 3phase power supply.The entire hot water generator shall be factory assembled and tested.Note:11. Water ‘IN’ temperature : 45 deg C.2. Water ‘OUT’ temperature: 50 deg C Nos 65 Kw(1w+1s) 629 Hot Water Pumps 630 Supply, installation, testing and commissioning ofPN16 rated Vertical Inline Split Coupled (with rigid aluminium alloy couplingbetween pump shaft and motor shaft) single stage centrifugal pump each capable of delivering the specified flow rate comprising the following and complete as per specifications. 631 Casing (Volute) - Cast Iron. 632 Impeller - Gunmetal Bronze- Statically and Dynamically Balanced 633 Casing Gasket - Confined Non Asbestos Fiber 634 Pump Shaft - SS416. 635 Flush Line - Braided Stainless Steel 636 Mechanical Seal - Outside Balanced (the pump design shall meet the requirement of servicing / changing the mechanical sealwithout disturbing the pump shaft alignment) 637 Motor Type - TEFC Squirrel Cage, Efficiency Class - IE2, Insulation - Class F, 415V ± 10% , 50Hz± 5%, 3Ø AC Power Supply 638 2 Nos. (1W+1S) Vertical Inline Split Coupled PN16 centrifugal pump 639 Right angle Suction guide with inbuilt guide vanes & strainer of Cast Iron body.To be supplied by pump manufacturer for unit responsibility. 640 Flow rate 80 USGPM and 15 METER head (1W+1S) 641 MICROBUBBLE AIR & DIRT SEPRATOR 642 Supply, installation,testing & commissioning of Micro bubble Air & Dirt Separator capability,automatic air purging arrangement etc.The shell shall be constructed of mild steel with coalescence. It shall work on the principle of coalescence.The water velocity the shall not Exceed 1.5m/sec.The M.S shall to be fabricated or other similar standard.The inlet and outlet connections shall be flanged. It shall be provided with a high capacity auto air vent at the to and a drain valve at the bottom.Matching flanges, high tensile bolts & nuts and gasket shall be also provided By the manufacturer.it shall be duly insulated 32mm thick class O Nitrile rubber insulation as per specifications complete as per specifications.The design parameters for the air separator of efficiency 96-98 % should be as follows with Safety working pressure:3.5 bar (32mm thick insulation) Line Size:250 mm diameter 643 Supply, installation,testing & commissioning of Micro bubble Air & Dirt Separator capability,automatic air purging arrangement etc.The shell shall be constructed of mild steel with coalescence. It shall work on the principle of coalescence.The water velocity the shall not Exceed 1.5m/sec.The inlet and outlet connections shall be flanged. It shall be provided with a high capacity auto air vent at the to and a drain valve at the bottom.Matching flanges, high tensile bolts & nuts and gasket shall be also provided By the manufacturer.it shall be duly insulated 32mm thick class O Nitrile rubber insulation as per specifications complete as per specifications.The design parameters for the air separator of efficiency 96-98 % should be as follows with Safety working pressure:3.5 bar (32mm thick insulation) Line Size:100 mm diameter 644 Design, Manufacture, Supplying, Transport to the site, Receiving, Unloading, Shifting to various locations, handling, assembling, installation in correct aligned position, grouting with dash fasteners, GI nuts-bolts, testing and commissioning of Totally Type Tested Panels (Form-4B construction) complying to IEC:61439 -1/2 cubical with Internal arc withstand of 50kA for 0.3 second and minimum impact resistance IK10 as per IEC:62262 with each compartment front unbreakable glazed door cover and back solid door. The degree of protection of minimum IP:42 for indoor and IP:65 for outdoor use. Panels shall be tested for an Impulse Withstand Voltage of 12kV. Suitable for 415V, 3Phase, 4 Wire 50 Hz Ac supply system bolted fabricated in compartmentalized (preferably) design from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plate, bottom base channel of MS section not less than 100mmx 50mmx50mmx 5mm thick for Main L.T. Panel and capacitor panels and 40mmx25mmx25mmx 5mm thickplates for MDB/MCC and SDBs etc.incl. cleaning & finishing complete, SMC bus bar supports, with short circuit withstand capacity of minimum 50kA for 1 Sec., fabrication shall be done in transportable sections and all front and back doors shall be hinged type and earth with frame, Entire panel shall have a common copper contineous earth bar of size 40mm x 6mm or as specified below at the rear with 2 Nos. earth stud each side, solid inter connections from main bus bar to switch gears upto cable alley with required size. bus bars and insulated control wiring with suitable size of FRLS PVC insulated copper conductor cable, cable alleys, cable gland plates in two half, incl. providing following switch gears :- 645 Panels will be powder coating (60-80micron as per IS:13871 for indoor and 90-100 micron for outdoor), include one size higher terminal block in cable alley and interconnecting wires between bus bars and terminals via MCB. All Bus-Bar alley and relay compartments shall be provided withfully automtic control thermostate with strip heater. 646 INCOMER 647 Incomers –2 Nos x 1500 Amps 4P ACB(1w+1s) 50 kA for O/C , S/C& E/Fproctection ,reverse power relay- trip & RS485 Port,cable connection on one side and Busbar connection on the other side. 648 INDICATING PANEL 649 Provide 1nos phase indicating lamps LED each backed up with fuse and switch. 650 Provide 2600/5a CT CI-1,15VA operatedDigital Ammeter for all in-comers and outgoings including C/Ts. 651 Provide 0-500 Volts range Digital Volt Meter with selector switch for all incomers 652 Two numbers indicating lamps LED on each incoming and outgoing feeder for indicating the status of feeder. 653 One number indicating lamp LED on each incoming and outgoing feeder for indicating that the feeder has tripped due to fault condition. 654 1 No. Power factor meter 655 1 No. Digital type energy meter. 656 Break Control Switch (T-N-C) 657 Control Fuse+Base 658 BUSBARS 659 Sections of 1Nos x 2000 Amps 4P bus bar chamber of suitable lengths with Aluminium bus bars. All bus bars and interconnections shall be of suitable size Al strips. Current density of Al shall not be more than 1.0 Amps/ sq.mm cross sectional area of Bus Bar 660 Incomer and 1Nos x2000 A EDO 4P ACBbus coupler shall be mechanically & electrically interlocked to avoid paralleling of the two supplies. 661 OUTGOING 662 3#220 TR Water Cooled Screw Chiller(2 #Working+1no of stand by) 663 450A4P ACB of suitable rating with overload, short circuit protection, on /off /trip indicationlightwith control MCB. MCCB Shall be 35 KA (ICU=ICS) SET - 04 ( Extra 1 Nos Spare) 664 3#Primary Pumps ( 2W+1S) @ 15 HP 665 63A TPN MCCB of suitable rating with15 HP Star delta stater, overload relay inbuilt single phase prevention, start/stop push buttons, MFM, on / off / trip indication lights with control MCB, Auto Manual Selector switch. MCCB Shall be 35 KA (ICU=ICS) SET - 04 ( Extra 1 Nos Spare) 666 3# secondary pumps ( 2W+1S) 667 100 A TPN MCCB of suitable rating with Space of 30 HP VFD, overload relay inbuilt single phase prevention, start/stop push buttons, on / off / trip indication lights with control MCB, Auto Manual Selector switch. MCCB Shall be 35 KA (ICU=ICS) SET - 04 ( Extra 1 Nos Spare) 668 3#CDW Pumps ( 2W+1S) @ 40 HP 669 100 A TPN MCCB of suitable rating with Space of 50 HP VFD, overload relay inbuilt single phase prevention, start/stop push buttons, on / off / trip indication lights with control MCB, Auto Manual Selector switch. MCCB Shall be 35 KA (ICU=ICS) SET - 04 ( Extra 1 Nos Spare) 670 3# 275TR C/T ( 2W+1S) (2x7.5 HP) 671 2 nos 63A4P MCB of suitable rating with overload, short circuit protection, on /off /trip indicationlightwith control MCB. MCCB Shall be 35 KA (ICU=ICS) SET - 04 ( Extra 1 Nos Spare) 672 2#Hot Water Pumps (15 HP) 673 63 A TPN MCCB of suitable rating with Space of 15 HP VFD, overload relay inbuilt single phase prevention, start/stop push buttons, on / off / trip indication lights with control MCB, Auto Manual Selector switch. MCCB Shall be 35 KA (ICU=ICS) SET - 03 ( Extra 1 Nos Spare) 674 2#65 KW Hot Water Generator(1 #Working+1no of stand by) 675 185 Amp4P MCB of suitable rating with overload, short circuit protection, on /off /trip indicationlightwith control MCB. MCCB Shall be 35 KA (ICU=ICS) SET - 03 ( Extra 1 Nos Spare ) 676 FLOOR MOUNTED CHILLED WATER AIR HANDLING UNITS FORWARD CURVED 677 Supply, installation, testing and commissioning of factory fabricatedDouble Skinned Chilled Water Air- handling unit Floor Mounted type fabricated with forward curve fan of static 50 mm out of extruded aluminium section with 0.63mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.63 mm plain Galvanised steel sheet inside with blower, Plug fan /blower section anddirectdriven / blower motor TEFCtype suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row coolingcoil made of Aluminium finned Copper tube with coil section,with following filtration level, polished stainless steel drain pan madeoutof 22 G sheet duly insulated complete with motor and belt drivepackage etc. without face and bypass dampers. The AHU panels shall be insulated with 23 mm thick & 36 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only 678 (a)Theface velocity across cooling coil shall be limited to 152 MPM maxm. 679 (b)Pre-filter section with Pre filter(10 Micron & 90 % Efficiency) in All following AHUS 680 (c)Fan Oulet Velocity Not to Exceed 10 m/s 681 (d)6 RD Cooling Coil(CC) 682 (e)2 RD Heating Coil(HC) 683 The complete AHU shall confirm to above & standard specification. 684 The capacity of Air-handlers shall be as follows: 685 FM AHU 1x18000 CFM AHU/50 MM Static 686 HYDRONIC UNITS (HI WALL TYPE) 687 Supply, Installation, Testing and Commissioning of the following equipment as per tender drawings, and specifications. 688 Wall Mounted Hydronic units complete , fresh air port , filter box complete with synthetic fiber filters, cooling coil, fans, 3-speed motors,drain pipe connection with drain pump complete. 689 Valves Set :- Copper flexible connection complete with set of ball valves withstrainer & ball valves without strainer,thermostat, Two way motorised control cum balancing valve(Pressure independent valve ), control wiring. 690 Electrical and control cabling for proper connection from the 15 amps outlet to connector box, valve etc. as well as connection of thermostat. 691 Hydronic units of minimum capacity in BTU/HR & CFM as follows : 692 12000Btu/Hr /2RD /400CFM ( 1.0 TR) 693 18000Btu/Hr /2RD /600CFM( 1.5 TR) 694 DX TYPE HI WALL UNIT (GREEN GAS) 695 Supply , installation, testing & Commissioning of DX type split AC 2.0. TR Dx type Hi wall Unit with air cooled condenser mounted in outdoor unit complete with scroll/rotary compressor ,condeNSOR ,wiring & accessories . Indoor units shall be wall mounted type complete with evaporator ,fan, filter ,drier, expansion devices & microprocessor control panel along with all accessories with refrigerant & oil charge , cordless remote controls. The unit shall be suitable for working,50 cycle /second ,1 phase AC supply .The unit shall be designed to take care of veritcal head 4mt & horizontal length of 30 mt & necessary oil seprator shall be included ,Necessary supporting arrangement for both indoor & outdoor units ( Powder Coated /Epoxy paintedMS stand for ODU units as per approved make shade by Engr in Charge) with necessary vibration isolation arrangement as per site condition etc.( with condensate drain pipe ,electrical pipe ,electrical power & control cabling between indoor & outdoor unit which shall be paid seprately ). The Color of the outdoor units to be finalized by theEngr InCharge as per building Architectural elevation. 696 Supply, installation, testing and commissioning of copper refrigerant piping -Copper Pipe(Two Length) suitable for 2.0. TR Dx type Hi wall Unit duly insulated with 9mm thick nitrile rubber of Class O between the above indoor & outdoor units as shown on OEM drawing enclosedwith necessary supports etc 697 Supply, installation, testing and commissioning of ultrasonic type Humidification package with Humidistat with all necessary control cabling as required as per standard specification & of following capacities: 698 3LPH 699 5LPH 700 Supply, Installation , testing , commissioningand handing over of the coil mounted HYBRID Ultra Violet Germicidal Irradiations ( UVGI) System for maintainingindoor Air Quality in indoor units. The system should be capable of reducing the airborne as well as surface bacteria, virus, mold, etc. The system should bedesigned to achive kill rate of not less than 90% per pass. The HYBRID UV system shall be designed to provide UV dosage of 2000 micro W/cm2 and should produce equal amount of positive & negative reactive oxygen species based on bi-polar plasma ionization to actively reduce the airborne & surface borne pathogens and other chemical gasses such as VOCs. The lamp shall have minimum 9000 working hrs life, ballasts shall be electronic type, life rated grater than 15000 starts. The lamp used should be T5 type, quartz glass, bi-pin type with ceramic ends. High quality aluminium reflector should be the part of the system. An run hour meter shall be provided to indicate remaining life of the Lamp in the form timer of digital display. Minimum UV intensity should be 500 microwatts at all the corners of the cooling coil. Minimum 4ft length of the duct should be covered with UV lights.Should follow IEC 61347-2-3, IEC 61000-3-2, IEC 61547, safety standards.Should follow IEC 60929, IEC68-2-6 Fc, IEC 68-2-29 Eb The lamps should be ISO Certified and plasma ionizers should be UL listed.The vendor should conduct bacteria test or bio test in any 2 locations to be done before and after installation.Note : All AHU,fcu and duct type unit shall be with UVGI 701 UPTO 5000 CFMDIDW FAN FOR EXHUAST/FRESH AIR IN NORMAL MODE VENTILATION 702 Supply,installation,testing and commissioning of ceiling mounted DIDW fans (AMCA Certified) with adjustable pitch blade & angle ,MS/GI casing, cast aluminium alloy impeller completewithTEFC Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, 4 pole,three Phase, A.C supply classF insulation with support & Motor rated Value IP55, mountings and flexible connection etc. & offollowing capacity.Note : - Outlet Velocity not to exced 10.0 MPS 703 Exhaust air in case of normal mode ventilation system Air Qty.= 4500CFM Static Pressure =30 mm WgMotor Pole= 4 PoleMotor = Not exceeding 3.7 Kw. 704 Exhaust air in case of normal mode ventilation system Air Qty.= 28000 CFM Static Pressure =30 mm WgMotor Pole= 4 PoleMotor = Not exceeding 15 Kw. 705 Exhaust air in case of normal mode ventilation system Air Qty.= 40000 CFM Static Pressure =30 mm WgMotor Pole= 4 PoleMotor = Not exceeding 15 Kw. 706 Fresh air in case of normal mode ventilation system Air Qty.= 4500CFM Static Pressure =30 mm WgMotor Pole= 4 PoleMotor = Not exceeding 3.7 Kw. 707 DOUBLE SKINNED AIR WASHER UNITS 708 Supply, installation, testing & commissioning of factory fabricateddouble skin Air-Washer comprising of 1No.DIDW GIfan, forward curved, complete with base frame,casing made out of 0.63mm galvanised sheet having flanged & boltedpanels insulated with PUF injectedbetween outer skin and inner skin.(The inner skin shall be PVC / Fibreglass lined also), wet section & tank shallbe made of stainless steel.The Air-washer shall be complete with fill of depth 200mm & face velocity across the fill shall be limited to152 MPM..The Air -washer shallhave an efficiency of 90% & shall be complete with motor, belt drive package, GI B Class interconnecting piping,valves, strainer NRV, aluminum viscous filters ,water pumps(1working +1stand by) for each air washeretc. & of the following capacities.Note : - Outlet Velocity not to exced 10.0 MPS 709 Air Quanitty :- 56000 CFM Motor : 1440 RPMStatic Pressure: 50 mm of WGMotor Kw : Not Exceed 1x15 Kw 710 Air Quanitty :- 75000 CFMMotor : 1440 RPMStatic Pressure: 50 mm of WGMotor Kw : Not Exceed 2x11 Kw 711 PROPELLER FANS 712 Supply, installation, testing & commissioning of wall mounted Propellar fans AMCA certified suitable for single phase, 230 volts, 50HzAC. supply of following capacities: completerequired offollowing capacities & as pershop drawing mentioned. 713 300mm dia 714 225 mm dia 715 INLINE FAN WITH SPEED REGULATOR 716 Supply,installation,testing and commissioning of ceiling suspendedInline fansAMCA certified (Rectangular/Round casing) complete with bird screen, rain guard, metal clad MCB & starter ,5m length copper cable, earthing wire all compete as required offollowing capacities as per specification and shop drawing mentioned. 717 Capacity: 800CFM Static Presure : 20 mm Of wg Kw :0.7 KW 718 Capacity: 1100 CFM Static Presure : 20 mm Of wg Kw :0.7 KW 719 Capacity: 1400 CFM Static Presure : 20 mm Of wg Kw :0.7 KW 720 Capacity: 1500 CFM Static Presure : 20 mm Of wg Kw :0.7 KW 721 Capacity: 1700 CFM Static Presure : 20 mm Of wg Kw :0.7 KW 722 Capacity: 2000 CFM Static Presure : 20 mm Of wg Kw :0.7 KW 723 Capacity: 2100 CFM Static Presure : 20 mm Of wg Kw :0.7 KW 724 TUBE/VANE AXIAL FLOW FANS WITH SOUND ATTENUATOR FOR NORMAL MODE AS WELL AS FIRE MODE VENTILATION (FRESH AIR FAN ) 725 Supply, installation, testing & commissioning of floor mounted double flanged, casing (motor should completly accomodated in Fan casing) axial flow fans AMCA Certified, with adjustable pitch blade & angle ,bird screen at fan inlet, MS/GI casing, cast aluminium alloy impellercomplete with TEFC Sq. Cage Inductionmotor suitable for 415 volts ± 10%,50Hz ± 3 %, 4/6/8pole, three Phase, A.C supply class F insulation with support, Phase&Motor rated Value IP55with following parameters & capacity:-Note: The rate deemed to includesupply and fitting of vibration isolators ( spring & rubber pads) complete as per specifications and drawings including fitting of accessories like Fire retardant canvass connectionpainting,gravity louver,bird screen etc. as required at site of work. Including all type of civil work like cutting/holes/chasing/cut out in brick wall etc 726 1.Outlet Velocity for normal mode fans not to exceed 14.0 MPS 727 2. Outlet Velocity for Fire mode fans not to exceed 18.0 MPS 728 3. Total efficiency of normal fans shall not less than 60% 729 4. Fan motor shall meet IE3standard as per IS-12615 730 5.Static pressure and Motor Rating : TheIndicated static pressure and motor rating is only provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized Equipment and submit for approval. The procurement shall be processed only after duly approval of calculation and selection from the Engr in charge. Sound attenuator shall be as specified with following characteristics: 731 5. Thickness of casing : for dia( 315-630 )mm - 2mm , dia ( 710-1120)mm - 3mm , dia (1250-1400)mm - 4mm & dia 1600mm - 5mm. 732 6. In case of attenuator , calculation of reduction of sound level with insertion loss of attenuator is to be submitted. 733 7.Vane Axial fan would use for Normal mode ventilation & Tube axial would use for Fire mode 734 Fan Capacity = 5000 CFMStatic Pressure = 20 mm WgMotor Rating = Not Exceed 3.7 KWNoise level = not exceed 85 db at 3 meter distance 735 Fan Capacity = 12000 CFMStatic Pressure = 20 mm WgMotor Rating = Not Exceed 3.7 KWNoise level = not exceed 85 db at 3 meter distance 736 Fan Capacity = 14000 CFMStatic Pressure = 20 mm WgMotor Rating = Not Exceed 7.5 KWNoise level = not exceed 85 db at 3 meter distance 737 Fan Capacity = 19000 CFMStatic Pressure = 20 mm WgMotor Rating = Not Exceed 7.5 KWNoise level = not exceed 85 db at 3 meter distance 738 Fan Capacity = 22000 CFMStatic Pressure = 20 mm WgMotor Rating = Not Exceed 7.5 KWNoise level = not exceed 85 db at 3 meter distance 739 Fan Capacity = 25000 CFMStatic Pressure = 20 mm WgMotor Rating = Not Exceed 11 KWNoise level = not exceed 85 db at 3 meter distance 740 Fan Capacity = 28000 CFMStatic Pressure = 20 mm WgMotor Rating = Not Exceed 11 KWNoise level = not exceed 85 db at 3 meter distance 741 Fan Capacity = 30000 CFMStatic Pressure = 20 mm WgMotor Rating = Not Exceed 3.7 KWNoise level = not exceed 85 db at 3 meter distance 742 VANE/TUBE AXIAL FLOW FANS WITH SOUND ATTENUATOR FOR NORMAL AS WELL AS FIRE MODE FAN (EXHAUST AIR ) 743 Supply, installation, shifting, loading, unloading, testing & commissioning of Floor mounted, double flanged, long casing (motor should completly accomodated in Fan casing) Vane/tube axial flow fans with sound attenuator (Fire Rated) AMCA Certified, with adjustable pitch blade & angle, bird screen at fan outlet , MS/GI casing, cast aluminium alloy impellercomplete with TEFC Sq. Cage Inductionmotor suitable for 415 volts ± 10%,50Hz ± 3 %, 4/6/8 pole, three Phase, A.C supply class H /S insulation with support, Phase&Motor rated Value IP55 . Motor shall be Thermally Rated for 250 deg C for 2 Hours should be certified as per BSEN12101-3:2002 standard & direct driven for smoke extraction fans with following parameters & capacity:- Note:-The rate deemed to includesupply and fitting of vibration isolators ( spring & rubber pads) complete as per specifications and drawings including fitting of accessories like Fire retardant canvass connection painting,gravity louver,bird screen etc. as required at site of work. Including all type of civil work like cutting/holes/chasing/cut out in brick wall etc 744 Sound attenuator shall be as specified with following characteristics: 745 1. Length not exceeding 1D (Fan Dia.) 746 2. Pressure drop through through sound attenuator shall not exceed 8mm WC 747 3. Outlet Velocity for normal mode fans not to exceed 14.0 MPS 748 4. Outlet Velocity for Fire mode fans not to exceed 18.0 MPS 749 5. Total efficiency of normal fans shall not less than 60% 750 6. Fan motor shall meet IE3standard as per IS-12615 751 7.Static pressure and Motor Rating : TheIndicated static pressure and motor rating is only provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized Equipment and submit for approval. The procurement shall be processed only after duly approval of calculation and selection from the Engr in charge. Sound attenuator shall be as specified with following characteristics: 752 8. Thickness of casing : for dia( 315-630 )mm - 2mm , dia ( 710-1120)mm - 3mm , dia (1250-1400)mm - 4mm & dia 1600mm - 5mm. 753 9. In case of attenuator , calculation of reduction of sound level with insertion loss of attenuator is to be submitted. 754 10.Vane Axial fan would use for Normal mode ventilation & Tube axial would use for Fire mode 755 Fan Capacity = 5500 CFMStatic Pressure = 20 mm WgMotor Rating = Not Exceed 3.7 KWNoise level = not exceed 85 db at 3 meter distance 756 Fan Capacity = 6500 CFMStatic Pressure = 20 mm WgMotor Rating = Not Exceed 3.7 KWNoise level = not exceed 85 db at 3 meter distance 757 Fan Capacity = 14000 CFMStatic Pressure = 20 mm WgMotor Rating = Not Exceed 7.5 KWNoise level = not exceed 85 db at 3 meter distance 758 Fan Capacity = 22000 CFMStatic Pressure = 20 mm WgMotor Rating = Not Exceed 7.5 KWNoise level = not exceed 85 db at 3 meter distance 759 Fan Capacity = 23000 CFMStatic Pressure = 20 mm WgMotor Rating = Not Exceed 7.5 KWNoise level = not exceed 85 db at 3 meter distance 760 Fan Capacity = 28000 CFMStatic Pressure = 20 mm WgMotor Rating = Not Exceed 11 KWNoise level = not exceed 85 db at 3 meter distance 761 Fan Capacity = 40000 CFMStatic Pressure = 20 mm WgMotor Rating = Not Exceed 3.7 KWNoise level = not exceed 85 db at 3 meter distance 762 JET FANS WITH CFD ANALYSIS 763 Supply ,installation ,testing & commissioningof Ductless Ventilation / Jet fans AMCA certified(2D silencer both side) as per specifications for normal ventilation suitable for Normal ventilation and Smoke Extraction application in case of emergency i.e. 300 Deg C / 2 Hrs operation.Each fan shall be complete with motor and impeller. The Casing of fans shall be made of hot dipped Galvanized steel. The complete fan assembly with its Casing, impeller & motor (not only the motor or one of the item) shall be certified as tested for 300 Deg C for 2 hours operation The Motor shall be suitable to run on 3 phase/50 hz/ 415 v electrical power, of following size.The CFD Analysis shall also be submitted by the Vendor at the time of installation to varify the qty and location of jet fans. 764 400 mm Dia. Jet fan Motor: as per dataMounting :Ceiling SuspendedInstallation along with Anchor Fastners (Hilti) 765 Supply ,installation ,testing & commissioningCO-SeNSOR confirming to UL & NFPA standard 766 Electrical Panel for jet fans PLC cum control panel 767 Supply ,installation ,testing & commissioningof BMS compatible power and control panel with allnecessary control logics and software feeding the exhuast and the jet fans Shall give power and control the Jet Vent fans, main exhaustand fresh air fans, CO SENSORS suitable for 30-90 ppm atpollution mode low speed.At 100 ppm and above and smoke mode during emergency system should run at high speed.Otherwise full system will run at the cycles mode Shall have the provision for hooking up the panel with fire fighting panel in case of emergecny shall have the provision for monitoring the whole system through BMS 768 PIPING WORK -CONDENSOR WATER PIPING/COOLING TOWER PIPING WITH INSULATION 769 Supply, laying /fixing, testing and commissioning of following nominal sizes of piping withinsulation (with necessary clamps, vibration isolators & fittings but excluding valves,strainers,Guages etc.) with fire retardant quality expanded polystyrene moulded pipe section of 20kg/m3 after a thick coat of cold adhesive (CRPX Compound )wrapping with 500G polythene faced hessian & finally applying o.63mm aluminum sheet cladding complete with type 3 grade 1 roofing felt strip (as per IS : 1322 as amended up to date ) at joints repairing of damage to building etc. as per specification & as required complete in all respect .Note : The pipe of Size 150mm & Below shall be MS C class as per IS :1239 & pipe size above 150mm dia shall be welded black steel pipe heavy class as per IS :3589, from minimum 6.35 thick MS sheet for the pipes upto 350 mm & from minimum 7mm thick MS sheet for the pipes of 400mm Dia & Above 770 350 mm dia (75mm thick Insulation) 771 300mm dia (75mm thick Insulation) 772 150mm dia (75mm thick Insulation) 773 125mm dia (75mm thick Insulation) 774 100 mm dia (50mm thick Insulation) 775 CONDENSOR WATER PIPING / COOLING TOWER PIPING WITHOUT INSULATION 776 Supplying, fixing, testing & commissioning of condenser water pipes of following sizes of MS C class along with necessary clamps, vibration isolators & fittings such as bends, tess etc. but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted / buried in ground excavation and refilling etc. as per specification and as required complete in all respect.Note : The pipe of Size 150mm & Below shall be MS C class as per IS :1239 & pipe size above 150mm dia shall be welded black steel pipe heavy class as per IS :3589, from minimum 6.35 thick MS sheet for the pipes upto 350mm & from minimum 7mm thick MS sheet for the pipes of 400mm Dia & Above. 777 350 mm dia 778 300mm dia 779 CHILLER & CONDENSER SIDE 780 Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with 80 kg/ cumdensityresinbondedfiberglassor144Kg/cumdensitymineralwool insulation (non combustible) pipe section insulation covered with a layer of 120 gm/sqm polythene sheet (vapour barrier) and finally applying star bond coating and repairingofdamagetobuilding etc.asper specifications and as required.Note:The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 781 300 mm dia (75mm thick Insulation) MS PIPE 782 250 mm dia (75mm thick Insulation) MS PIPE 783 200 mm dia (75mm thick Insulation) MS PIPE 784 150 mm dia (50mm thick Insulation) MS PIPE 785 125 mm dia (50mm thick Insulation) MS PIPE 786 100 mm dia (50mm thick Insulation) MS PIPE 787 80 mm dia (50mm thick Insulation) MS PIPE 788 65 mm dia (50mm thick Insulation) MS PIPE 789 50 mm dia (50mm thick Insulation) MS PIPE 790 40 mm dia (50mm thick Insulation) MS PIPE 791 32 mm dia (50mm thick Insulation) MS PIPE 792 25 mm dia (50mm thick Insulation) MS PIPE 793 HIGH SIDE VALVES INSULATED VALVES 794 Supplying, fixing, testing & commissioning of following valves, strainers, gauges in the chilled/Hot water plumbing duly insulated to the same specifications as the onnected piping and adequately supported as per specifications. 795 Butterfly Valve Wafer Type Butterfly Valves, Ductile (SG) Iron Body & Disc SS-431 Shaft EPDM Integrally Mouded Liner with Hand Lever Operated upto size 150mm, 200mm & ab0ve Gear OperatedPressure Rating PN16 796 300 mm Dia (75 MM Thick Insulation ) 797 250 mm Dia(75 MM Thick Insulation ) 798 200 mm Dia(75 MM Thick Insulation ) 799 150 mm Dia (50 MM Thick Insulation ) 800 125 mm Dia (50 MM Thick Insulation ) 801 100 mm Dia (50 MM Thick Insulation ) 802 65 mm Dia (50 MM Thick Insulation ) 803 50 mm Dia (50 MM Thick Insulation ) 804 40 mm Dia (50 MM Thick Insulation ) 805 32 mm Dia (50 MM Thick Insulation ) 806 Balancing Valve with built in measuring facility with CI Body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled/Hot water circulation as specified. 807 200 mm Dia (75 MM Thick Insulation ) 808 150 mm Dia (50 MM Thick Insulation ) 809 Ystrainer of ductile CI Body flanged ends with stainless steel strainer for chilled/hot water water circulation including insulation as specified. 810 200 mm Dia(75 MM Thick Insulation ) 811 65 mm Dia (50 MM Thick Insulation ) 812 Non- return Valve with dual plate of CI Body SS Plates vulcanised NBR seal flanged end & PN16 pressure rating for chilled/Hot water circulation including insulation as specified. 813 200 mm Dia(75 MM Thick Insulation ) 814 65 mm Dia (50 MM Thick Insulation ) 815 Pot Strainer 300 mm dia 816 Supply, Installation, Testing & Commissioning of Equalizer Valvein dirt legs complete with nipples as per specifications, 150mm dia. 817 Supplying, fixing, testing and commissioning of SG Iron Body flow switch with necessary control wiring and interlocking atCondenser Water Pump 818 Supplying, installation, testing and commissioning of on line scale preventer suitable 300 Dia and flow rate with necessary fittings and accessories. 819 Supply, installation, testing and commissioning of test points in brass / bronze construction with non return ring complete with suitable size socket on insulated lines complete nipples etc. as required for measurement of pressure and temperature. 820 Supply, installation, testing and commissioning of digital thermometer with adopter for above test point. 821 Supply, installation, testing and commissioningof digital Pressure gauge with adopter for above test point. 822 Supply, Installation, Testing & Commissioning of Drain Valves in dirt legs complete with nipples as per specifications of following sizes:- 823 50 mm Dia 824 40 mm Dia 825 25 mm Dia 826 Supply, installation, testing and commissioning of duly insulated with 80mm thick(40mm in two layers ) expanded polystrene P quality with aluminium cladded open type expansion tank made out of 5 mm thick MS sheet of size 1.0mt x1.0mt x 1.0mt inner surface area epoxy paint two coats to avoid rust complete withallaccessories valves &fittings forchilled water as per specs . 827 LOW SIDE VALVES 828 Supply, installation, testing and commissioning of following Ball Valve PN 16 rating duly insulated with Al Cladded valves as per pipe dia as detailed above , complete with companion flanges, nuts ,bolts , gaskets etc.as specified.confirming to specification 829 40 mm Dia 830 32 mm Dia 831 25 mm Dia 832 Supply, installation, testing and commissioning of following Butterfly Valve PN 16 rating duly insulated with Al Cladded valves etc of same rating as per pipe dia as detailed above , complete with companion flanges, nuts ,bolts , gaskets etc.as specified.confirming to specification 833 80mm Dia 834 65mm Dia 835 50mm Dia 836 Supply, installation, testing and commissioning of Balancing ValvePN 16 rating duly insulated with Al Cladded valves etc of same rating as per pipe dia as detailed above , complete with companion flanges, nuts ,bolts , gaskets etc.as specified.confirming to specification of following sizes:- 837 80mm Dia 838 65 mm Dia 839 50 mm Dia 840 40 mm Dia 841 32 mm Dia 842 25 mm Dia 843 Supply, installation, testing and commissioning ofY type strainer PN 16 rating duly insulated with Al Cladded valvesetc of same rating as per pipe dia as detailed above , complete with companion flanges, nuts ,bolts , gaskets etc.as specified.confirming to specification of following sizes:- 844 80 mm Dia 845 65 mm Dia 846 50 mm Dia 847 40 mm Dia 848 32 mm Dia 849 25 mm Dia 850 Supply, installation, testing & commissioning of motorised 2 way Modulating Valve complete with electrical actuator,heavy duty PN10 cast iron body with nylon coated S.G. iron disk,water sealant lining, stainless steel shaft, control lever with thermostat control wiring,accessories if any like transformer etc.position confirming to standard specification for the following sizes 851 80 mm Dia 852 65 mm Dia 853 50 mm Dia 854 40 mm Dia 855 32 mm Dia 856 25 mm Dia 857 20 mm Dia 858 Supply, Installation, Testing, & Commissioning of Automatic air vent with ball valve in brass construction complete with nipples, union etc. as required at all high points in the pipe lines. The valve shall be such as to have non-return valve as integral part of the vent of size 15 mm dia auto air vent valve 859 Supply, Installation, Testing & Commissioning of 25mm diameter Drain Valves in dirt legs complete with nipples as per specifications. 860 Supply, installation , testing &commissioningof 13mm nitrile rubber Class O insulated condensatedrain water piping of GI Medium class complete with Medium Class fittings like elbows, tees, reducers bends, MS flanges, supports, welding, painting etc. as required conforming 861 50 mm dia pipe 862 40 mm dia pipe 863 32 mm dia pipe 864 25 mm dia pipe 865 AIR DISTRIBUTION-GSS RECTANGULAR DUCTING 866 Supply, Installation, Balancing & Commissioning of factory fabricated GSS sheet metalducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc finally applying fire rated paint as per BS 476 Part 24 . as per approved drawings and specifications of following sheet thickness complete as required.Note:-splitter & vanes etc. shall be a part of ducting no extra cost shall be paid for the same .All support selection shall be based on gripple wire .No other support shall be acceptable. 867 0.63 mm sheet duct 868 0.80 mm sheet duct 869 1.0 mm sheet duct 870 1.25 mm sheet duct 871 Supply, Fabrication, installation and testing of GSS sheet metal ducts & finally applying fire rated paint as per BS 476 Part 24(SiteFABRICATED DUCTS For Connection /Plenum etc.) in accordance with the approved shop drawings complete with all accessories like vanes, flanges, suspension rods , anchor bolts, GI bolts & nuts, etc., as per specifications. 872 0.63 mm sheet duct 873 0.80 mm sheet duct 874 1.0 mm sheet duct 875 1.25 mm sheet duct 876 Supply, fabrication, installation and testing of 50 micron powder coated, aluminum extruded linear fixed horizintal bar/grill/Diffuserswith all side flangesas per approved shop drawings. 877 SSupply, installation, testing and commissioning of GI volume control duct dampercomplete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc. as per specifications.(18G) 878 Supply,Installation and Testing of 50 micron powder coated, aluminum extruded volume control damper for collor to be provided with suitable links and quadrants for control of volume of air. 879 Supply, fabrication, installation and testing of 50 micron powder coated, aluminum extruded fresh air louvers with bird screen & aluminum volumne control damper with all side flanges as per approved shop drawings. 880 Supply, Installing, testing of fire retardant flexible canvass connector 200 mm deep made of imported FIBER GLASS WEAVE fabric with Silicon Rubber Coating & 30 mm Extruded Aluminum Frame. 881 Fire Dampers 882 Supply, installation, testing & commissioning of Duct/Wall mounted multi blade, motorised fire & smoke dampers with spring return actuator. The damper shall be of atleast 1.5 hr. fire rating and actuated with the help of 24 V electric actuator excluding. The damper shall be as per UL listed UL 555; 1995 and CBRI approved. The damper shall be constructed out of 16G galvanised steel sheet & as per specification with Control Cable to Potential Free Contact for tripping of AHU fan motor. 883 Damper Actuator 884 Supply, installation, testing and commissioning ofMotorised Spring ReturnActuator fordevices upto0.8 sq. metrewithwith control panel & temperature sensor. 885 INSULATION WORK. 886 Insulation material 13mm thick shall be closed cell flexible elastomeric foam based on synthetic rubber composition with fire retardant properties.The insulation material shall have Microban®* an anti-microbial product, which is EPA (Environmental Protection Agency), USA Approved, as an integral part of insulation that cannot be washed off or worn off. The insulation material shall give enhanced level of protection against harmful Microbes such as fungi, bacteria & mold and should confirm to UL 181, ASTM G 21/C 1338. Thermal conductivity of insulation material shall not exceed 0.036 W/(m.K) atmean temperature of 24C as per ASTM C 177 / ASTM C 518. Water Vapor Permeability of insulation material shall be minimum 0.05 Perm-in. /0.725 x 10-13 Kg/[s.m.Pa] without any external barrier as per ASTM E 96. Procedure A. The insulation material shall have water absorption of 0.2% by volume as per ASTM C 209 / ASTM C 1763.The insulation material shall have fire performance rating of 25/50 as per ASTM E 84. The insulation material shall have fire performance rating of UL 94. The insulation material shall be self-extinguishing, does not drip, and does not spread flames. . The insulation material shall be dust and fibre free. The insulation material shall be formaldehyde free. The insulation material shall be CFC & HCFC free. The insulation material shall meet ASHRAE 90.1-2010, ASHRAE Standard 189.1, NFPA 90A & NFPA 90B Standards. The insulation material shall withstand maximum surface temperature of +105 Deg.C and minimum surface temperature of -50 Deg.C as per ASTM C 534. The insulation material shall have ODP (Ozone Depletion Potential) and GWP (Global Warming Potential) of Zero. The insulation material shall be applied indoors. Coverings shall be used for exposed areas.Thickness of the insulation shall be as specified for the individual application. The insulation material shall be installed as per manufacturer’s recommendation. 887 ACOUSTIC INSULATION - FOR DUCT 888 Supply and Application of Acoustic Insulation Inside the Duct of following thickness with Engineered Nitrile Rubber open cell foam with Density 140 - 180 Kg/m3 passing Class 1 Fire Performance test as per BS 476 Part 7 and with built-in EPA approved Microban antimicrobial protection; to be applied using manufacturers recommended Rubber based Adhesive in a blend of solvents. , Metal Strips and Anchor Fasteners as per design. 889 15 mm thickness (Internal Lining of Ducts) 890 25 mm thickness (Internal Lining of Ducts) 891 Supplying, fixing acoustic lining on wall and ceiling of AHU rooms & plant room with Nitrile Rubber open cell foam with Density 140 - 180 Kg/m3 passing Class 1 Fire Performance test as per BS 476 Part 7 and with built-in EPA approved Microban antimicrobial protection; to be applied using manufacturers recommended Rubber based Adhesive in a blend of solvents. , Metal Strips and Anchor Fasteners as per design. 892 ROOF INSULATION 893 Supply & Installationof Thermal Insulation 25 mm thick Class O Nitrile Rubber Insulation with GC cloth on Duct exposed to sunlight using Closed CellAnti Microbial and Anti Fungal Class O Nitrile Rubber Elastomeric Insulation of Density 40 - 60 Kg/m3, Thermal Conductivity of 0.035 W/mk at 200 Celcius Mean Temp. and Mu≥10000 and with Chemically treated Factory Laminated Woven Fibre Glass Cloth with200+/-20 gsm using manufacturers recommended Rubber based Adhesive in a blend of solvents complete as per Specifications 894 CUBICAL PANEL BOARD 895 Supply, Installation, Testing and commissioning ofwall mounted panels constructed out of 2mm thick CRCA sheet duly powder coated as per specifications. The panel shall have hinged door with on-off interlocks. The panel shall be complete with incoming MCCB, suitable bus bars of aluminum construction, bus links complete with Star delta starter with hands, off, automatic modeselection switch, ammeter for each motor, timer, AutoManual switch, remote start/stop contacts, earthing connector etc.,as required complete as per specifications.Panel consisting of following:Indicating lights LED for incommer and outgoingAmmeter with selector switchVolt meter with selector switch with fusePanel With following Capacities: 896 13ATP MPCB of suitable ratingwith 2.0 HP DOL PANELhaving overload relay in built single phase prevention, start / stop push buttons, phase indication lights with control MCB,on / off / tripindicationlightswith control MCB, digital ammeter with single CT & Voltmeter with selector switch,2C/O Control Relay with Control Thermostate. MPCB shall be of 35KA 897 25ATP MPCB of suitable ratingwith 3.0 HP DOL PANELhaving overload relay in built single phase prevention, start / stop push buttons, phase indication lights with control MCB,on / off / tripindicationlightswith control MCB, digital ammeter with single CT & Voltmeter with selector switch,2C/O Control Relay with Control Thermostate. MPCB shall be of 35KA 898 25A TP MPCB of suitable ratingwith 5.0 HP DOL PANELhaving overload relay in built single phase prevention, start / stop push buttons, phase indication lights with control MCB,on / off / tripindicationlightswith control MCB, digital ammeter with single CT & Voltmeter with selector switch,2C/O Control Relay with Control Thermostate , Auto Manual Selector switch. MPCB shall be of 35KA 899 25 A TP MPCB of suitable ratingwith 7.5 HP VFD PANELhaving overload relay in built single phase prevention, start / stop push buttons, phase indication lights with control MCB,on / off / tripindicationlightswith control MCB, digital ammeter with single CT & Voltmeter with selector switch,2C/O Control Relay with Control Thermostate & Suitable VFD Fan Louver,Auto Manual Selector switch. MPCB shall be of 25KA 900 VFD forFan Motor with IP 20 enclosures, Mains disconnect, Built-in Harmonic Filters, EMC Filters (Electromagnetic Compatibility Filters), 3 PID Controlers, Automatic Energy Optimization / Load dependent flux optimization functionality for maximum energy savings & complying with the tender specifications. The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. 901 32 A TP MPCB of suitable ratingwith 10 HP VFD PANELhaving overload relay in built single phase prevention, start / stop push buttons, phase indication lights with control MCB,on / off / tripindicationlightswith control MCB, digital ammeter with single CT & Voltmeter with selector switch,2C/O Control Relay with Control Thermostate & Suitable VFD Fan Louver,Auto Manual Selector switch. MPCB shall be of 25KA 902 VFD forFan Motor with IP 20 enclosures, Mains disconnect, Built-in Harmonic Filters, EMC Filters (Electromagnetic Compatibility Filters), 3 PID Controlers, Automatic Energy Optimization / Load dependent flux optimization functionality for maximum energy savings & complying with the tender specifications. The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. 903 63 A TP MPCB of suitable ratingwith 15 HP VFD PANELhaving overload relay in built single phase prevention, start / stop push buttons, phase indication lights with control MCB,on / off / tripindicationlightswith control MCB, digital ammeter with single CT & Voltmeter with selector switch,2C/O Control Relay with Control Thermostate & Suitable VFD Fan Louver,Auto Manual Selector switch. MPCB shall be of 25KA 904 VFD forFan Motor with IP 20 enclosures, Mains disconnect, Built-in Harmonic Filters, EMC Filters (Electromagnetic Compatibility Filters), 3 PID Controlers, Automatic Energy Optimization / Load dependent flux optimization functionality for maximum energy savings & complying with the tender specifications. The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. 905 80 A TP MPCB of suitable ratingwith 20 HP VFD PANELhaving overload relay in built single phase prevention, start / stop push buttons, phase indication lights with control MCB,on / off / tripindicationlightswith control MCB, digital ammeter with single CT & Voltmeter with selector switch,2C/O Control Relay with Control Thermostate & Suitable VFD Fan Louver,Auto Manual Selector switch. MPCB shall be of 25KA 906 VFD forFan Motor with IP 20 enclosures, Mains disconnect, Built-in Harmonic Filters, EMC Filters (Electromagnetic Compatibility Filters), 3 PID Controlers, Automatic Energy Optimization / Load dependent flux optimization functionality for maximum energy savings & complying with the tender specifications. The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. 907 125 A TP MPCB of suitable ratingwith 25 HP VFD PANELhaving overload relay in built single phase prevention, start / stop push buttons, phase indication lights with control MCB,on / off / tripindicationlightswith control MCB, digital ammeter with single CT & Voltmeter with selector switch,2C/O Control Relay with Control Thermostate & Suitable VFD Fan Louver,Auto Manual Selector switch. MPCB shall be of 25KAVFD forFan Motor with IP 20 enclosures, Mains disconnect, Built-in Harmonic Filters, EMC Filters (Electromagnetic Compatibility Filters), 3 PID Controlers, Automatic Energy Optimization / Load dependent flux optimization functionality for maximum energy savings & complying with the tender specifications. The price quoted for supply, installation, testing & commissioning shall be inclusive of all duties & taxes, insurance, transportation / shipment cost from works to site, loading / unloading, port clearance charges etc. 908 ISOLATORS 909 Providing & fixing weather proof isolator with suitable rating near each unit, the prices should be inclusive of copper cabling from isolators to outdoor units. 910 POWER CABLE/CABLE TRAY 911 Supplyingand laying PVC/ XLPE insulated PVC sheathed heavy duty, armouredelectrical cables with Aluminium conductor for working voltage upto and including 1100volts ( conforms to IS:1554, Part-1) 912 3.1/2 core300sq. mm. 913 3.1/2 core 240sq. mm. 914 3.1/2 core50sq. mm. 915 3.1/2 core35sq. mm. 916 3.5 core25sq. mm. 917 4 core16sq. mm. 918 4 core10 sq. mm. 919 Supplyingand laying PVC/ XLPE insulated PVC sheathed heavy duty, armouredelectrical cables with Copper conductor for working voltage upto and including 1100volts ( conforms to IS:1554, Part-1) 920 4 core16 sq. mm. Stranded ( Copper) 921 4 core10 sq. mm. stranded ( Copper) 922 4 core6 sq. mm. stranded ( Copper) 923 3 core4 sq. mm. stranded ( Copper) 924 3 core2.5 sq. mm. ( Copper Control cable) 925 3 core1.5 sq. mm. ( Copper Control cable) 926 Laying only one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required upto 35 sqmm to 95 sqmm(clamped with 1MM thick sadle ) 927 Upto 35 sq. mm 928 Above 35 sq. mm and upto 95 sq. mm 929 Above 185 sq. mm and upto 400 sq. mm 930 Supplying and making end termination of following sizes with brass compression gland including providing and crimping solderless plugs/ferrules of sizes PVC insulated PVC sheathed aluminum conductor armoured cable 1.1 KV grade. 931 3.1/2 core 240sq. mm. 932 3.1/2 core50sq. mm. 933 3.1/2 core35sq. mm. 934 3.1/2 core25sq. mm. 935 4core16sq. mm. 936 4 core10sq. mm. 937 3/4 core16sq. mm.( Copper) 938 3/4 core4 - 10sq. mm.( Copper) 939 3 core1.5sq. mm.( Copper Control cable) 940 3 core2.5sq. mm.( Copper Control cable) 941 Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. (Powder coated shall be of Siemens Grey Colour- RAL 7032) 942 100mm width X 50mm depth X 1.6 mm thickness 943 150mm width X 50mm depth X 1.6 mm thickness 944 200mm width X 50mm depth X 1.6 mm thickness 945 Earthing Strip / Wires. 946 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. 947 Supply & laying 25x5mm GI strip at 0.5mt below ground as strip earth electrde including connection/terminatng with GI nut,bolt,spring,washer etc as required.)jointing shall be done by overlapping &with 2sets of brass nuts bolt & spring washer spaced at 50mm) 948 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. 949 AHU & MECH./ VENTILATION PANELS & BOARDS 950 Supplying, installation, testing & commissioning of 415V, 3 Phase, 50 Hz., 4 wire system, sheet steel clad, dust and vermin proof cubical and Indoor type wall mounted extendible type power distribution boards/ Panels compartmentalized design and fabricated out of 2 mm CRCA sheet steel complete with Copper Bus bars, Electrical interlocks as per the various status of all the equipments indicated on the drawings. Providing & Fixing of base plate / channel, P/F the following Switchgears, complete with earth Bus bar throughout the length of the panel, terminal arrangement for Cables incomings / Outgoings from Top / Bottom as per drawings and as approved by consultant / Engineer incharge, The incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement, detachable gland plates, adequate size cable alley, Sign writing, Painting, Earthing, Numbering, Danger plate etc. complete as required as per specifications and drawing attached. 951 MAIN MECH. & VENTILATION PANEL (ELECTRICAL ROOM) 952 INCOMING: 953 1 No. TPNIncomer feeder having 1000A 4P MDO ACB (25kA) & ON/OFF/ TRIP indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 954 BUSBAR: 955 One set of TPN, AL bus bar rated 1200 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 956 OUTGOINGS: MCCB Ics-25kA & MCB as per specified 957 3 Nos. TPN feeder having 320ATPN MCCB, ONindication with control MCB. 958 2 Nos. TPN feeder having 250ATPN MCCB, ONindication with control MCB. 959 1 Nos. TPN feeder having 200ATPN MCCB, ONindication with control MCB. 960 1 Nos. TPN feeder having 160ATPN MCCB, ONindication with control MCB. 961 8 Nos. TPN feeder having 100ATPN MCCB, ONindication with control MCB. 962 2Nos. TPN feeder having 63A TPN MCCB, ONindication with control MCB. 963 Other items such as 964 1 Lot of control wiring 965 1 Set of designation plates 966 Complete panel Described as above. 967 AHU PANEL-1 LOCATION FOURTH FLOOR 968 INCOMING: 969 1 No. TPNIncomer feeder having 100A 4P MCCB (18kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 970 BUSBAR: 971 One set of TPN, AL bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 972 OUTGOINGS: 973 9Nos. TPN feeder having 32A TPN MCB C curve with ON indication. 974 6Nos. TPN feeder having 16A TPN MCB C curve with ON indication. 975 Other items such as 976 1 Lot of control wiring 977 1 Set of designation plates 978 Complete panel Described as above. 979 AHU PANEL-2 LOCATION FIFTH FLOOR 980 INCOMING: 981 1 No. TPNIncomer feeder having 100A 4P MCCB (18kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 982 BUSBAR: 983 One set of TPN, AL bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 984 OUTGOINGS: 985 6Nos. TPN feeder having 32A TPN MCB C curve with ON indication. 986 10Nos. TPN feeder having 16A TPN MCB C curve with ON indication. 987 Other items such as 988 1 Lot of control wiring 989 1 Set of designation plates 990 Complete panel Described as above. 991 AHU PANEL-3 LOCATION SIXTH FLOOR 992 INCOMING: 993 1 No. TPNIncomer feeder having 100A 4P MCCB (18kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 994 BUSBAR: 995 One set of TPN, AL bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 996 OUTGOINGS: 997 5Nos. TPN feeder having 32A TPN MCB C curve with ON indication. 998 5Nos. TPN feeder having 25A TPN MCB C curve with ON indication. 999 4Nos. TPN feeder having 16A TPN MCB C curve with ON indication. 1000 Other items such as 1001 1 Lot of control wiring 1002 1 Set of designation plates 1003 Complete panel Described as above. 1004 AHU PANEL-4 LOCATION SEVENTH FLOOR 1005 INCOMING: 1006 1 No. TPNIncomer feeder having 100A 4P MCCB (18kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 1007 BUSBAR: 1008 One set of TPN, AL bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 1009 OUTGOINGS: 1010 2Nos. TPN feeder having 40A TPN MCB C curve with ON indication. 1011 4Nos. TPN feeder having 32A TPN MCB C curve with ON indication. 1012 1Nos. TPN feeder having 25A TPN MCB C curve with ON indication. 1013 5Nos. TPN feeder having 16A TPN MCB C curve with ON indication. 1014 Other items such as 1015 1 Lot of control wiring 1016 1 Set of designation plates 1017 Complete panel Described as above. 1018 MECH. VENTILATION PANEL-1(BASEMENT FLOOR) 1019 INCOMING: 1020 1 No. TPNIncomer feeder having 63A 4P MCCB (18kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 1021 BUSBAR: 1022 One set of TPN, AL bus bar rated 100 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 1023 OUTGOINGS: 1024 3Nos. TPN feeder having 40A TPN MCB C curve with ON indication. 1025 1Nos. TPN feeder having 32A TPN MCB C curve with ON indication. 1026 2Nos. TPN feeder having 25A TPN MCB C curve with ON indication. 1027 5Nos. TPN feeder having 16A TPN MCB C curve with ON indication. 1028 Other items such as 1029 1 Lot of control wiring 1030 1 Set of designation plates 1031 Complete panel Described as above. 1032 MECH. VENTILATION PANEL-2(GROUND & MEZZ. FLOOR) 1033 INCOMING: 1034 1 No. TPNIncomer feeder having 200A 4P MCCB (18kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 1035 BUSBAR: 1036 One set of TPN, AL bus bar rated 300 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 1037 OUTGOINGS: 1038 6 Nos. TPN feeder having 63A TPN MCCB with ON indication & control MCB. 1039 Other items such as 1040 1 Lot of control wiring 1041 1 Set of designation plates 1042 Complete panel Described as above. 1043 MECH. VENTILATION PANEL-3(GROUND & MEZZ. FLOOR) 1044 INCOMING: 1045 1 No. TPNIncomer feeder having 250A 4P MCCB (18kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 1046 BUSBAR: 1047 One set of TPN, AL bus bar rated 300 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 1048 OUTGOINGS: 1049 10Nos. TPN feeder having 63A TPN MCB C curve with ON indication. 1050 2Nos. TPN feeder having 32A TPN MCB C curve with ON indication. 1051 Other items such as 1052 1 Lot of control wiring 1053 1 Set of designation plates 1054 Complete panel Described as above. 1055 MECH. VENTILATION PANEL-4(FIRST FLOOR) 1056 INCOMING: 1057 1 No. TPNIncomer feeder having 315A 4P MCCB (18kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 1058 BUSBAR: 1059 One set of TPN, AL bus bar rated 400 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 1060 OUTGOINGS: 1061 5Nos. TPN feeder having 63A TPN MCCB with ON indication & control MCB. 1062 6Nos. TPN feeder having 63A TPN MCB C curve with ON indication. 1063 Other items such as 1064 1 Lot of control wiring 1065 1 Set of designation plates 1066 Complete panel Described as above. 1067 MECH. VENTILATION PANEL-5(SECOND FLOOR) 1068 INCOMING: 1069 1 No. TPNIncomer feeder having 250A 4P MCCB (18kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 1070 BUSBAR: 1071 One set of TPN, AL bus bar rated 300 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 1072 OUTGOINGS: 1073 6Nos. TPN feeder having 63A TPN MCCB with ON indication & control MCB. 1074 3Nos. TPN feeder having 63A TPN MCB C curve with ON indication. 1075 Other items such as 1076 1 Lot of control wiring 1077 1 Set of designation plates 1078 Complete panel Described as above. 1079 MECH. VENTILATION PANEL-6(THIRD FLOOR) 1080 INCOMING: 1081 1 No. TPNIncomer feeder having 315A 4P MCCB (18kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 1082 BUSBAR: 1083 One set of TPN, AL bus bar rated 400 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 1084 OUTGOINGS: 1085 5Nos. TPN feeder having 63A TPN MCCB with ON indication & control MCB. 1086 6Nos. TPN feeder having 63A TPN MCB C curve with ON indication. 1087 Other items such as 1088 1 Lot of control wiring 1089 1 Set of designation plates 1090 Complete panel Described as above. 1091 MECH. VENTILATION PANEL-7(FOURTH FLOOR) 1092 INCOMING: 1093 1 No. TPNIncomer feeder having 100A 4P MCCB (18kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 1094 BUSBAR: 1095 One set of TPN, AL bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 1096 OUTGOINGS: 1097 4Nos. TPN feeder having 63A TPN MCB C curve with ON indication. 1098 Other items such as 1099 1 Lot of control wiring 1100 1 Set of designation plates 1101 Complete panel Described as above. 1102 MECH. VENTILATION PANEL-8(FIFTH FLOOR) 1103 INCOMING: 1104 1 No. TPNIncomer feeder having 100A 4P MCCB (18kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 1105 BUSBAR: 1106 One set of TPN, AL bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 1107 OUTGOINGS: 1108 4Nos. TPN feeder having 63A TPN MCB C curve with ON indication. 1109 Other items such as 1110 1 Lot of control wiring 1111 1 Set of designation plates 1112 Complete panel Described as above. 1113 MECH. VENTILATION PANEL-9(SIXTH FLOOR) 1114 INCOMING: 1115 1 No. TPNIncomer feeder having 100A 4P MCCB (18kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 1116 BUSBAR: 1117 One set of TPN, AL bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 1118 OUTGOINGS: 1119 4Nos. TPN feeder having 63A TPN MCB C curve with ON indication. 1120 Other items such as 1121 1 Lot of control wiring 1122 1 Set of designation plates 1123 Complete panel Described as above. 1124 MECH. VENTILATION PANEL-10(SEVENTH FLOOR) 1125 INCOMING: 1126 1 No. TPNIncomer feeder having 100A 4P MCCB (18kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 1127 BUSBAR: 1128 One set of TPN, AL bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 1129 OUTGOINGS: 1130 2Nos. TPN feeder having 32A TPN MCB C curve with ON indication. 1131 3Nos. TPN feeder having 63A TPN MCB C curve with ON indication. 1132 Other items such as 1133 1 Lot of control wiring 1134 1 Set of designation plates 1135 Complete panel Described as above. 1136 MECH. VENTILATION & STAIRCASE PRSS. PANEL (TERRACE FLOOR) 1137 INCOMING: 1138 1 No. TPNIncomer feeder having 160A 4P MCCB (18kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 1139 BUSBAR: 1140 One set of TPN, AL bus bar rated 200 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 1141 OUTGOINGS: 1142 4Nos. TPN feeder having 63A TPN MCB C curve with ON indication. 1143 3Nos. TPN feeder having 32A TPN MCB C curve with ON indication. 1144 2Nos. TPN feeder having 25A TPN MCB C curve with ON indication. 1145 Other items such as 1146 1 Lot of control wiring 1147 1 Set of designation plates 1148 Complete panel Described as above. 1149 LIFT 1150 POWER DISTRIBUTION BOARDS & PANELS 1151 Supplying, installation, testing & commissioning of 415V, 3 Phase, 50 Hz., 4 wire system, sheet steel clad, dust and vermin proof cubical and Indoor type floor/ wall mounted, free standing extendible type power distribution boards/ Panels compartmentalized design and fabricated out of 2 mm CRCA sheet steel complete with Aluminium Bus bars, Electrical interlocks as per the various status of all the equipments indicated on the drawings. Providing & Fixing of base plate / channel, P/F the following Switchgears, complete with earth Bus bar throughout the length of the panel, terminal arrangement for Cables incomings / Outgoings from Top / Bottom as per drawings and as approved by consultant / Engineer incharge, The incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement, detachable gland plates, adequate size cable alley, Sign writing, Painting, Earthing, Numbering, Danger plate etc. complete as required as per specifications and drawing attached. 1152 LIFT PANEL - 1 Passenger LIFT 1153 1 No. TPNIncomer feeder having 63A 4P MCCB (16kA) with ON indications, 3 nos. phase indicating lamps to show the incoming power with control MCB. 1154 Bus Bar 1155 One set of TPN, AL bus bar rated 100 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 1156 Goods lift 1157 Design supply, install, testing and commissioning goods lift, PRODUCTF-8000-3CO-30-8/8 (MR) 1158 Quantity of Lifts 2 Nos. 1159 CAPACITY (kgs) 8000 kgs (min) 1160 SPEED (mps) 0.5 mps 1161 RISE (m) 45000 mm 1162 STOPS 8 Stops – 8 Openings with openings on the same side 1163 FLOOR DESIGNATION B+G+6 1164 CONTROLLER TYPEMicroprocessor based Control 1165 DRIVE VVVF 1166 POWER SUPPLY 415 Volts (3 Phase AC) 1167 OPERATION One call at a time. 1168 CAR GROUP Simplex 1169 MACHINE MRL Gearless (Located Above the Hoist way) 1170 TYPE Machine Room Type 1171 CAR FINISH:Rear Mid Panel = M S Powder coated, Rear Corner Panels = M S Powder coated,Side Panels = M S Powder coated,Front Panels = M S Powder coated 1172 VENTILLATION Cross flow fan 1173 FLOORING M.S. Chequared Plate 1174 CAR DOOR FINISH M S Powder coated 1175 LANDING DOORS FINISH M S Powder coated 1176 HOISTWAY DIMENSIONS (W x D – mm)5325 mm W x 6000 mm D 1177 CAR DIMENSIONS (W x D x H – mm) 3600 mm W x 4000 mm D x 3000 mm H 1178 CAR & HOISTWAY DOOR TYPE 6 Panel Center Opening (3CO) doors 1179 DOOR OPENING (W x H – mm)3600 mm W x 3000 mm H 1180 DOOR OPERATOR ACVVVF Door Operator 1181 Overhead5500 mm 1182 Pit Depth2000 mm 1183 COPstandard 1184 CAR POSITION INDICATOR standard 1185 HALL FIXTURE FACE PLATE S.S. Hairline Finish or equivalent 1186 HALL BUTTON ARRANGEMENT As per our standards in catalog 1187 STANDARD FEATURES: Independent Service, Overload Device,Door Nudging Operation, Emergency Car Light Unit,Infrared Curtain Door Protection, Emergency Alarm Button,Door Open/Close Button, Auto Fan Cut Off, 1188 TYPE/OPERATION SPECIFICATION 1189 ACVVVF GEARLESS GOODS ELEVATORS F-8000-3CO-30-8/8 (MR) 1190 POWER DISTRIBUTION BOARDS & PANELS 1191 Supplying, installation, testing & commissioning of 415V, 3 Phase, 50 Hz., 4 wire system, sheet steel clad, dust and vermin proof cubical and Indoor type floor/ wall mounted, free standing extendible type power distribution boards/ Panels compartmentalized design and fabricated out of 2 mm CRCA sheet steel complete with Aluminium Bus bars, Electrical interlocks as per the various status of all the equipments indicated on the drawings. Providing & Fixing of base plate / channel, P/F the following Switchgears, complete with earth Bus bar throughout the length of the panel, terminal arrangement for Cables incomings / Outgoings from Top / Bottom as per drawings and as approved by consultant / Engineer incharge, The incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement, detachable gland plates, adequate size cable alley, Sign writing, Painting, Earthing, Numbering, Danger plate etc. complete as required as per specifications and drawing attached. 1192 LIFT PANEL 2 GOODS LIFT 1193 1 No. TPNIncomer feeder having 100A 4P MCCB (16kA) withON indications, 3 nos. phase indicating lamps to show the incoming power with control MCB. 1194 Bus Bar 1195 One set of TPN, AL bus bar rated 150 Amps (after considering necessary deratingsof 75%) for phases and neutral for half capacity of phases. 1196 Outgoings:- All outgoing shall have Ics = 16 KA (As per SLD) 1197 3 Nos. 63A TPN feeder having 63A TPN MCCB with ON indication. 1198 1 Nos. 25A DP feeder having 25A DP MCB 1199 1Nos. SPACE suitable for 63A 4P feeder having 100A 4P MCCB with ON indication. 1200 Other items such as 1201 1 Lot of control wiring 1202 1 Set of designation plates 1203 EOT CRANE 1204 Design,Manufacture,Supply,Installation,Testing & commisioning of10T/2T x 25M Span, 12m lift DGEOT Crane crab hoist with electrical & accessories. (CE Certified) (Dual Speed) 1205 Supply of DSL busbar along with current collectors and support brackets suitable for 10/2T DGEOT Crane (RYBG) for the bay length of 38 meter.Baylength – 38 meters 1206 Supply of LT Rail suitable for 10/2T Double Girder EOT crane 1207 FIRE SUPPRESSION SYSTEM 1208 SITC of Aerosol generator having aerosol mass of suitable gm shall be thermally actuated by means of aluminium alloy thermal sensor complying to UL 33 that can be mounted over the generator itself. The housing shall be constructed of stainless steel shell.Housing shall be sealed with a non-permeable membrane. Units shall have passed salt spray corrosion testing per relevant UL Standard as part of their listing. Aerosol generated shall be potassium based. Agent shall have no ozone depletion potential and no global warming potential. Agent shall be listed by the US EPA under the SNAP program. Fixed Condensed Aerosol Systems per NFPA 2010. UL approved design density of the aerosol should be less than 100g/cu.mtr for Class A, B & C fires as per NFPA. The Aerosol generator should have self life of 15 years. Aerosol generator shall be supplied with Stainless steel Bracket & Thermal Sensor.Makes Approved: STAT-X, MAC, Epotos 1209 11KV VCB PANEL BOARD 1210 750KVA DG SET 1211 SMART ACTIVE HARMONIC FILTER (SAHF) with 500A & 700KVA 1212 MAIN LT PANEL 1213 MAIN LIGHT & POWER PANEL (ELECTRICAL ROOM) 1214 FDB-1. 1215 FDB-2. 1216 FDB-3. 1217 FDB-4. 1218 FDB-5. 1219 FDB-6. 1220 FDB-7. 1221 FDB-8. 1222 FDB-9. 1223 FDB-10. 1224 FDB-11. 1225 FDB-12. 1226 FDB-13. 1227 MAIN MECH. & VENTILATION PANEL (ELECTRICAL ROOM) 1228 AHU PANEL-1 LOCATION FOURTH FLOOR 1229 AHU PANEL-2 LOCATION FIFTH FLOOR 1230 AHU PANEL-3 LOCATION SIXTH FLOOR 1231 MECH. VENTILATION PANEL-1 (BASEMENT FLOOR) 1232 MECH. VENTILATION PANEL-2 (GROUND & MEZZ. FLOOR) 1233 MECH. VENTILATION PANEL-3 (GROUND & MEZZ. FLOOR) 1234 MECH. VENTILATION PANEL-4 (FIRST FLOOR) 1235 MECH. VENTILATION PANEL-5 (SECOND FLOOR) 1236 MECH. VENTILATION PANEL-6 (THIRD FLOOR) 1237 MECH. VENTILATION PANEL-7 (FOURTH FLOOR) 1238 MECH. VENTILATION PANEL-8 (FIFTH FLOOR) 1239 MECH. VENTILATION PANEL-9 (SIXTH FLOOR) 1240 MECH. VENTILATION PANEL-10 (SEVENTH FLOOR) 1241 MECH. VENTILATION & STAIRCASE PRSS. PANEL (TERRACE FLOOR) 1242 LIFT PANEL 1 PASS. LIFT 1243 LIFT PANEL 2 GOODS LIFT 1244 FIRE ALARM & PUBLIC ADDRESS SYSTEM 1245 Supply & installation of Networkable & Microprocessor based 160‐ characters LCD/ Touch Screen LCD DisplayNetwork Repeator panel. The LCD shall Display all events / detectors, devices status of complete systems in the networked, The repeator shall be equipped with Mounting options etc. (ULApproved) complete in all respect as specified or indicated including testing on completion. 1246 Supplying & laying of cabling for fire detection and alarm system with 2 core annealed tinned copper conductor Fire Survival, 2 x 1.5 sq mm armoured cable complete in all respect as specified or indicated including testing on completion. 1247 Supplying & laying of 8 Core 1.5Sq MM wire from Main Fire Alarm Panel to Repeater Panel complete in all respectas specified or indicated including testing on completion. 1248 SOLAR SYSTEM 1249 75KW SOLAR SYSTEM SUPPLY & Installation 1250 234 sets : Supply, Installation, testing & Commissioning of solar module,necessary electrical cables to connect solar cells together and to the DBs as well as inverters to havea complete operational circuit, Conduits, cable trays, trucking, earthing system and complete Main Junction Box according to the drawings and engineers instruction and approval. quoted rate deemed to include all materials needed to connect from modules to inverter and have complete job ready for installing high quality PV modules connected and costs of repairing if any damaged works including following:- 1251 1 Lot: Supply, Installation, testing & Commissioning of Module mounting Structure according to the detailed drawing and approval by the Engineer. Contractor should submit shop drawing for proper mounting structure. Rate shall include aluminium anodized/ HD galvanized structure, supports, plates & screws, bracing and angles for dividers etc to complete the structure. quoted rate deemed to include excavation, concreting and fixing of structure. 1252 3 Set: Supply, Installation, testing & Commissioning of 25kW/30KW1P grid tie inverter with minimum 2 MPPT inputs. The inverter depending on the system design and installation proposed. The inverter unit shall be suitable for indoor and outdoor installations. Cable terminations to inverter shall be oftype DC plug and socket connectors. Technical literature has to be provided as generated by the inverters manufacturer software. Inverter shall allow an adjustable power factor outdoor, minimum AC output power 180 kw, with all necessary electrical cables, Conduits and trays and all other materials and workmanship needed toconnect with the main distribution panel according according to the drawings andengineers instruction and approval and have a complete job ready. 1253 3 Set: Supply, install, connect and operate 20KA DC SPD DC surge protector for grid connected system . The Surge protector unit shall be suitable for indoor and outdoor installations. The surcharge protector system shall include all necessary electrical cables, Conduits and trays and all other materials and workmanship needed to the system according to the drawings andengineers instruction and approval and have a complete job ready. 1254 Solar system power connect at Main LT panel Bus, 200A MCCB provided to terminate solar plant cabling. 1255 DG SET 1256 Supply, Installation, testing & commissioning of 750 KVA DG coupled to 750 KVA alternator as per detailed specifications, with canopy reducing the noise to 75 db at a distance of 1meter as per specifications & latest CPCB -II norms with following:-. 1257 Base frame and DG shall have radiator. 1258 DG shall be suitable for paralleling 1259 Gerb make antivibration pads. 1260 Electronic governor with communication port. 1261 Day tank/ base tank for fuel with level markings inside canopy 1262 All lockable doors having brass handles. 1263 Front shall have perspex sheet to indicate fuel guage & ECP Panel along with one emergency push button out side canopy. 1264 Fuel piping from internal tank shall be brought O/side canopy & connected for gravity feed to common external tank. 1265 Suitable space heater for alternator. 1266 Lub oil drain arrangement. 1267 Canopy to have required size blower for cooling as well as air combustion. (Calculation for blower shall be submitted along with drawing) 1268 Canopy temperature shall not rise beyond 70 C above ambient and necessary temperature gauges will be installed. 1269 Suitable amended alternator cable box with sufficient space for flexible lads/ cores of 5 x 3.5C x 300 sq. mm armoured XLPE AL cables and also suitable arrangement for 5 nos. Cable exit with proper arrangement/ provision for mounting/ fixing double compression glands on alternator cable box. 1270 Provision in the canopy for taking out silencer, control cables & power cables in proper manner in such a way that after commissioning no foreign material like water, insect, reptile can entre from these cut-outs. 1271 Suitable self priming pump with engine (if inbuilt by the manufacturer). 1272 Provision in the canopy for taking out 3 runs XLPE AL armoured cables along with control cables. Cable box on top of alternator shall be modified to take out 3 nos. 3.5C alm. arm. cables with proper arrangement/ provision for mounting/ fixing double compression glands on alternator cable box from bottom/ side. 1273 Maintenance free battries with leads & connectors complete with mounting arrangement & protection switchgears. 1274 DG shall be completely filled with luboil & fuel required for commissioning and trial run for 2 hrs. 1275 Supply, designing, fabrication and installation ofexhaust pipe of DG sets along with exhaust stack including two coats of red oxide and one coat afterward with high temperature resistance paint as per the approved colour / existing stack colour. Before fabricating, the contractor has to get the design approved from the Project Manager/consultant. The exhaust structure shall be suitable for 1 Nos. 750 KVADG sets. Stack shall be installed along the wall & above terrace level as per standard norms. 1276 EXHAUST SYSTEM 1277 Supply, erection, testing and commission of MS 300 mm dia exhaust system minimum 4.85 mm thick with complete bends & flanges and all accessories complete in every way. 1278 Supply and installation of 300 mm dia SS flexible bellows with matching flanges along with required hardware i.e. gasket, nut bolt, washer etc as required. 1279 Insulation of pipe 300 mm dia with RBS wool of min 50mm. thickness 148 Kg/ m3 density and 24 SWG Alm cladding inside & outside DG room complete. Insulation will be done in such a way that temperature surrounding it shall not exceed 5O C beyond ambient. 1280 Fuel piping 1281 Supply, installation of fuel pipe between common existing HSD fuel tank to fuel tanks inside 750 KVA SDG inclusive all fitments / bends / accessories/ valves etc including level gauges of following sizes:- 1282 38/40 mm fuel pipe 1283 20mm fuel pipe 1284 25mm fuel pipe 1285 Erection, installation, testing & commissioning of 990 ltr. overhead raised buffertank M.S diesel tank manufactured with 2mm thick MS sheet complete with manholes cover, drain valve, marking along with M.S structure (bottom of tank at 0.6 meter high) with inbuilt flame proof level switches inside. 1286 CCTV SYSTEM 1287 Supply, installation, testing and commissioning of UL Listed 1.3 Megapixel CMOS Vandal-proof, Network Dome Camera (1280 × 960) resolution, 1/3” Progressive scan CMOS, [email protected], AGC ON. 0 Lux with IR on, IR cut filter with auto switch, IR range up to 30 RM, H.264 / MJPEG, Dual stream, motion detection, Bit rate 32 Kbps-16Mbps, 3D DNR, DWDR, 12 VDC ± 10%, PoE , IP66, K-10, with fixed lens between(2.5 - 12mm),size of lens shall be as per site requirement & mockup. ONVIF, SIP, NMS, Profile S supported, connectors complete as required in dome shape fixed type for mounting recessed in false ceiling or mounted on wall complete as required. 1288 Supply, installation, testing and commissioning of UL Listed 1.3 Megapixel CMOS, Vandal-proof, Network Bullet Camera,(1280x960) resolution, 1/3” Progressive scan CMOS, [email protected], AGC ON. 0 Lux with IR on, IR cut filter with auto switch,, H.264 / MPEG4 , Dual stream, Bit rate 32 Kbps-16Mbps, Standard IP66, PoE , with Fixed Lens between(2.5 - 12mm),size of lens shall be as per site requirement & mock-up ,IR range Up to 50 mtr, motion detection, withONVIF, SIP, NMS,Profile S supported, connectors complete as required IR Bullet fixedtype for mountingon wall or surface mounted with back box and adapter plate complete as required. 1289 Supply, installation, testing and commissioning of Professional Video management and recording software and hardware comprising 32Ch. NVR to record output of all cameras mentioned above in Item no 1,2,3 Third-party network cameras supported, H.264 Compression - Up to 5 Megapixels resolution recording, multiple Hard Disk 8 SATA with each having maximum storage capacity of 6 TB , as required for minimum 30 days recording required for recording when in 80% motion @ 720p 25 Frames per second(Real Time) or for recording when not in motion @720p 12.5 Frames per second, with RAID-5 Storage ,10/100/1000 MBps network interface with each NVR, 2 USB2.0,HTTP Networkable, backupby USB/DVDWR, required Client software included, 6 Nos Client licenses and required Camera licenses for each camera completeas required. All the components to be of same make as Camera. 1290 Supply,installation,testing and commissioning of32” CCTV colour LED screen including all accessories complete as required. 1291 Supply, installation, testing and commissioning ofLayer 2 switchHP/ Cisco make with 32 ports PoE managed, 10/100/1000 EB core switches to support all IP cameras & Access Control System , with 2 Fibre uplinks Portmodule only complete as required. 1292 Supplying and installation of 19 32U APW President Rack with glass front door, steel rear door, power supply, MCB, cable manager, drawer shelves and wiring channels to accommodate systems equipment and accessories as mentioned in the BOQ above and including all connections and terminations as required. 1293 Supply, Installation, Testing & Commissioning of 6TB Hard Disk storage system 1294 Supply , installation , testing and commissiong of Weather proof junction box for outdoor cameras 1295 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required 1296 Subtotal