|
| 1 | Supplying of decorative 50W LED Posttop light, aluminium enclosure and Die casted heat sink, with input voltage of 230-240V, Operating voltage 140-270v ac, frequency-50-60Hz, CRI ≥80, lumen efficacy of light ≥140 lm/w,CCT: 3000K-5700K, Power factor >0.9, THD: <10%, Surge protection : 10Kv, IP65 protection,with warm white led lights, Complete with built-in potted electronic LED electronic driver with Open circuit protection, Including 3C X 1.5 sq.mm (Appro. 3.5 Mtrs) copper cable for necessary connection, Over Voltage protection with built in SPD with Warranty of 24 months, suitable for the mounting on decorative pole. Make:-Havells/K-lite/Jaquar/Crompton or equivalent. |
| 2 | Fabrication and Supply of Asthetically designed decorative hot dipped galvanised mild steel step poles with grey poweder finish with height of 3mtrs height, not less than 70mm dia of top of the pole, thickness of poles not less than 3.5MM, pole suitable for post top mounting, window for terminal connection along all necessary terminal\"s with MCB, Window cover is fitted with allen screws to the pole with leakage proof,Mounting base Mild steel base plate of not less than 10mm thickness, Circular bases of 250-300mm dia with 4 no\"s elliptical holes sultiable for J-bolts.Make:-Havells/K-lite/Jaquar/Crompton or equivalent. |
| 3 | Foundation and erection charges Upto 7.50 Mtrs long Octagonal / Conical/mild steel step pole duly erecting on base plate duly provided 4 Nos foundation J-bolts with nuts with suitable for fixing the decorative pole (0.45 mtrs X 0.45Mtrs X1000mm)size M15 Concrete work vibrated concreting mixing with necessary steel reinforcement as directed by the field engineers during execution including centering, decentering, water curing as required, soil exacavation, back filling, muffing removal and coil earthing including all labour charges and cost and conveyance of materials, coat painting of each foundation with primer and Exterior plastic emulsion paint as required for smooth surface etc. complete. |
| 4 | Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I)Make:- Gloster/Finolex/Havells/KEI |
| 5 | Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. Makes:- Gampson/Duroline/Ultraplus/Dutron/CPE/equivalent |
| 6 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Upto 35 sq. mm in the existing RCC/ HUME/ METAL pipe as required. |
| 7 | Supplying and making 4 X 16 sq. mm (28mm) end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 8 | Supplying and drawing 2 x 4 sq. mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required for earthing |
| 9 | Installation, testing and commissioning of pre-wired, Posttop led light of all types, complete with all accessories and tube/lamp etc. directly on pole including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 10 | Supply and fixing of suitable out door feeder piller box of size made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the feeder pillar with cement concrete, including Supply and fixing of Legrand / Schnieder make63A, 4 Pole MCB as incomer, 9 Nos 6- 32A SP MCBs as out goings, indication lamps, din channel, 6 Sqmm 3 core copper cable for invidual light control, connectors, bus bars,shroudings, gland plates and provision for 3-phase energy meter etc., complete for finished item of work and suitable wiring provision for connecting the nature switch with following. |
| 11 | Supply and erection of L.T. 3phase Digital multifunctionenergy meter Class I RS 485 with LED display for measuring all the parameters (Voltage, Current, Frequency, Power factor, KW, KVA, KWH, KVA, KVAH, KVAR and THD Events) on existing box panel board including connections etc., complete.MAKES : CONZERVE / ELMEASURE / LK/(L&T) / SEIMENS. |
| 12 | Supplying,installation,testing and commissioning of Astronomical time switch of 3 output (1output per phase) and suitable for three phase supply configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. |
| 13 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe etc with charcoal/ coke and salt as required |
