Tender For Supply Of Furniture To The Ttd Kalyanamandapam In Kurnool, Kurnool District, Tirupati-Andhra Pradesh

Supply Of Furniture To The Ttd Kalyanamandapam In Kurnool, Kurnool District , Supply Of Ms Steel Cot To Fit Bed Of Size :1905Mm(L)X945mm(W)X390mm (H) Height Made With 16 Gauge Cr Sheet (Is:513-2008) At Top (Size Of Cr Sheet Including Crimp On Four Sides:2055X1065mm) And Legs Are Made With Ms Square Pipe Of Size 40Mmx40mmx2.60Mm (Confirming To Is:4923-1997).The Head Board, Leg Board Of Top And Bottom Horizontals Are Made With Ms And Verticals ,Ade With Ms Pipe Of 25Mm Dia 18 Gauge Confirming To Is:138-1973)As Per Drawing 3 Nos Of Vertical Ms Pipes Of 20Mm Dia With 18 Gauge Are To Be Provided At Head Board Side As Per Drawing. The Bottom Side Of The Cot Should Be Welded With 2 Nos Of Ms Tube Of Size 50Mmx25x2.60Mm(Confirming To Is:4923-1977) And 2 Nos Ms Square Pipe Of 25Mmx25mmx2.00 (Confirming To Is:4923-1997) Two Sides (Head Board And Leg Board Side) Suitable Pvc Bushes To Be Provided For Legs At Bottom. The Rate Inclusive Of All Taxes Except Gst. And As Per Note In The Boq.,Supply Of Rubberised Coir Mattresses Of Overall Size Of 1920 Mm, 915Mm, 100 Mm With Sandwich Technology With 25 Mm Thick Top Layer Of Polyurethane Foam With 28 Density As Per Isi Standards And 2Nd Layer Is 24Mm Rubberised Coir Sheet Of Extra Firm (80-99 Density) Made With Needle Felt Technology. The Third Layer Is 28Mm Carbon Foam With 28 Density As Per Is Standards. The 4Th Layer Is Again 24Mm Rubberised Coir Sheet Of Extra Firm (80-99 Density) Made With Needle Felt Technology. All These 4 Layers Are To Be Covered With Baniyan Cloth Of 110 Gsm All Sides And The Total Matresses Should Be Covered With State Transports Rexine Cover. The Coir Mattresses Should Be Standard And Approved Make , Best Quality Confirming To Is: 8391:1987 With Isi Mark And The Density Of Coir Should Meet Firm Grade Standards. The Weight Of Coir Mattresses Should Be 10.98 Kg Minimum And 12.58 Kgs Maximum Etc., Complete As Directed By The Department. Each Coir Mattress Should Be Printed Ttd And Month And Year Of Supply On Outer Cover .Rexine Cover And Should Be Identical. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Except Gst. For Work Site Including Conveyances And Placing Site And As Per Note In The Boq.,Supply Of Polyster Fibre Pillows Of Overall Size 17 Inches X 27 Inches Along Profile Filling With Hbpl-1 ( High Bulk Pillow,Grade -1 ) Fibre ( 7D, 64 Mm ) Filling Weight Not Less Than 650 Grams Net, The Fabric Should Be 110 Grams / Sqm Etc., Including All Taxes Except Gst And Other Incidental Charges Etc., Complete. For Work Site Including Conveyance And Placing At Site .(Excluding Gst At 18%) And As Per Note In The Boq.,Supply Of M.S Teapoys Of Over All Size 3 Feet X 2 Feet X 2Feet 6 Inches / (900X600x750mm) With Four Legs Made Of 16Guage Ms Square Pipes Of Outer Size 25X25mm And The Four Legs Are Inter Connected And Bottom Around With Same Pipe And Top Covered With 18Mm Thick Exterior Grade Pre Laminated Particle Board Of Size 3 Feet X 2 Feet (Teak Finish One Side And Of Approved Finish On The Other Side) With 2 Inches Projection All-Round From The Frame Work Including Cost Of Teak Wood Beading To The Edge Of The Sheet, Rubber Bushes To The Four Legs And Spray Painting With Synthetic Enamel Paint Of (1St Quality) Over Primary Coat (Total Three Coats) With Approved Color And Make To The Ms Frame Work Etc., Complete As Directed By The Department. The Rate Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. (Excluding Gst). And As Per Note In The Boq.,Supply Of Co Polymer Poly Propylene Plastic Moulded Chairs With Arms Confirming To Is :13713-1993 Specifications And Not Less Than The Following Physical Parameters (A) Seat Height From Floor Level Measured At Centre 430Mm (B) Seat Width And Depth At Middle Place Are 410Mm And 420Mm Resectively (C) Back Rest With Width And Eight 285Mm And 390Mm Respectively (D) Total Weight Of Plastic Chairs Is 2.58 Kgs .The Rate Is Includes All Taxes And Other Incidental Charges Etc.,(Excluding) Gst. And As Per Note In The Boq.,Supply Of S.S. Dining Tables (4 Seater ) To Work Site, Inclusive Of All Taxes And Duties Transportation Etc., Complete With The Following Specification. (Excluding Gst) - Over Rall Sizes 2400 X 500 X 750 Mm - Top Frame Alround With S.S. Angles 32 X 32 X 3 Mm And Three Width Wise Supports And One Length Wise Middle Support With Ss Flat Of Size 25 X 5 Mm - Top Sheet 16 G Ss 304 Grade Sheet Double Bedded On All Sides - Legs Six Legs With 38 Mm Dia 16 G Ss Pipes With Adjustable Nylon Bullet Feet, Cross Supported With 25 Mm Dia Ss Pipe 16G At A Level Of 150 Mm From Bottom (Length Wise Two Central Supports And Width Wise Three Supports) - Legs Six Legs With 38 Mm Dia 16 G Ss Pipes With Adjustable Nylon Bullet Feet, Cross Supported With 25 Mm Dia Ss Pipe 16G At A Level Of 150 Mm From Bottom (Length Wise Two Central Supports And Width Wise Three Supports) - All S.S Sheet Angles Pipes Are Of 304 Grade. And As Per Note In The Boq.

Refer document

INR 8500.0 /-

Refer document