|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. D.S.R No-15.23.1 |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. D.S.R No-15.56 |
| 3 | Brick work with common burnt clayF.P.S (non madular) brick of class designation 7.5in superstructure above plinth level up to floor V level in all shape and sizes in ::(1 cement :4 coarse sand ) D.S.R- 6.4.1) |
| 4 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 ( 1 cement 4 coarse sand). D.S.R No-13.5.1 |
| 5 | Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge Internal work-Exposed on wall. 25mm nominal outer dia Pipes (DSR No-18.7.3) |
| 6 | Providing and fixing Clorinate Polyvinyl Chlorode (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c. fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge Concealed work including cutting chases and making good the etc. 20 mm nominal outer dia Pipes DSR No- 18.8.2 |
| 7 | Providing and fixing of CPVC gate valve of 25mm dia nominal size of approved quality as per directed by Engineer-in-Charge. |
| 8 | Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge110 mm dia. |
| 9 | Providing and fixing of PVC OFF Set of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. |
| 10 | Providing and fixing of PVC Cross Tee of 110x110x110 mm dia nominal size of approved quality as per directed by Engineer-in-Charge. |
| 11 | Providing and fixing of Nahani Trap Tee of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All work up to plinth level. 1:2:4 (1 cement 2coarse sand (zone-III) 4 graded stone aggregate 20 mm nominal size). DSR No- 4.1.3 |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All work up to plinth level, 1:6:12 (1 cement 6 coarse sand (zone-III) 12 graded Brick aggregate 40 mm nominal size).PWD (SCH) 273. |
| 14 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (D.S.R No- 11.38) |
| 15 | Providing and fixing 1st quality ceramic glazed wall tiles rectified (Kajaria/Johnson/RAK premium quality) conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, blackas approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 300x450mm |
| 16 | Providing and fixing white vitreous china Single Piece water closet Perryware make Camel (C8856 (S-220) size of 645x340x680mm, with manually controlled device conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, ( W.C. pan with ISI marked white solid plastic seat and lid ). |
| 17 | Providing and fixing Indian type glazed earthen ware W.C. Orisa pan of size 580x440x300mmPerryware make (C0117) with PVC Cistern, P.V.C. Flush pipe including supply of all materials, labour and T&P etc for the proper completion of the work includingremoval of old pan etc. if so required. |
| 18 | Providing and fixing of white glazed earthen ware Wash Hand Basin with pedestal Luco Smart, Size, 560x450x710mm, Cat No- C8981 with C.P jali, C.P angle valve, pvc waste pipe, C.P basin mixture, PVC connection 15mm dia 400mm long including supply of all materials labour T&P etc. required for proper completion of the work. |
| 19 | Providing and fixing C.P. brass wall mixture with tele phonic shower 3 in 1 (L&K make code 0457 ) or Equivalentquality. |
| 20 | Providing and fixing C.P. brass angle valve l&Kfor basin mixer and geyser points of approved quality 15 mm nominal bore. |
| 21 | Providing and fixing C.P. Brass Two way Bib cock with wall flange L &K or Equivalent make including supply of all material, labour T&P etc. complete. |
| 22 | Providing and fixing C.P. OVER HEADshower with arm heavy qualityL&K 0668) with 15mm inlet:100 mm diameter. |
| 23 | Supply and fixing C.P. Health Faucet with 8mm Dia 1.00 mtr. Long Flexible tube & wall hook L&K Make including supply of all material, labour T&P etc. complete. |
| 24 | Providing and fixing CP Towel Rod OF L&K Make 600x20mm together with pair of CP brass brackets to fit the towel rail complete |
| 25 | Providing and fixing CP Towelring L & K or equivelent fittings arrangement of approved quality. |
| 26 | Providing and fixing of glass shelf 22\"L&K make with C.P. Guard standard size and bracket including supply of all material labour T&P required for proper completion of the work. |
| 27 | Providing and fixing of glass corner, CERA or Equivalent Make, including supply of all material labour T&P required for proper completion of the work. |
| 28 | Supply and Fixing C.P. brass bib cock 15mm. dia. Long body (L&K 0047) including supply of all materials, labour, T&P etc. required for proper completion of the work. |
| 29 | Supply and fixing C.P. Jet spray with lead1.00 mtr long Flexible tube aproved qualityincluding supply of all material, labour T&P etc. complete. |
| 30 | Providing and fixing C.P. Soap Dish l&k make including supply of all material , labour T&P etc. complete. |
| 31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 32 | Distempering with 1st quality acrylic distemper(ready mixed )having VOC (Volatile organic compound) content less than 50 gram/litre, of approved manufacturer , including applying additional coats wherever required to achieve even shade and colour. old work (one or more coats) .DSR-13.81 |
| 33 | Painting with synthetic enamel paint of approved brand and manufacturer to give an even shade :one or more coats on old work (DSR-13.99.1) |
| 34 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. Of area 3 sq. metres and below(D.S.R No-15.12.1) |
| 35 | Supply of Salwood wrought framed Single rebates and fixed including simple moulding straight work as in Chaukhat frame including supply of all materials, labour, T&P etc. required for proper completion of work. |
| 36 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for hold fasts embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 ( 1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size). painting two coats of approved wood preservation to sides of chowkhats and making good the damages to wall and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. Door chowkhats DSR No- 14.2.1 |
| 37 | Supply and fixing ISI marked 32 mm thick flush door shutter commercial conforming quality conforming to IS : 2202 (Part I) including supply and fixing of hinges,screws, sliding bolt, tower bolt, door stoper and Allum. Handel etc complete work. |
| 38 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. DSR-1.1.18 |
