|
| 1 | Dismantling of existing plaster including disposal of refuse as directed by engg. i/c. within a distance of 60mtr. |
| 2 | Dismantling of doors & windows, chowkhats with holdfast and including stacking of dismantled materials as directed by engg. i/c. within a distance of 60mtr. |
| 3 | Dismantling of reinforced cement concrete or reinforcement brick work, including stacking of materials as directed by engg. i/c. within a distance of 60mtr. |
| 4 | Providing and laying in position cement cocrete of specified grade excluding the cost of centering and shuttering - All work up to the plinth level in 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size |
| 5 | 12 mmthick cement plaster with 1:3 cement & co. sand mortar om brick wall etc all comp. |
| 6 | Providng & fixing 18mm thick granite (gang saw cut), mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joint treated with white cement, mixed with matching pigmen, epoxy touch ups, including rubbing, curing, mouldingand polishing to edges to give high gloss finish etc.complete at all levels. |
| 7 | Finishing walls with Putty approved brand and manufacture and of required shade on umdacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. |
| 8 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undecoarated wall surface to give even shade over @ 1.25Ltr/10Sqm including one coat of primer apllied @ 0.75Ltr/10Sqm coat curing and cost of all material, labour T&P etc all complete. |
| 9 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undecoarated wall surface to give even shade over @ 1.25Ltr/10Sqm including one coat of primer apllied @ 0.75Ltr/10Sqm coat curing and cost of all material, labour T&P etc all complete. |
| 10 | Writimg point for lightwith 1.5 sq. Mm. FRILSH PVC insulatedmultistrand single core copper condoctor cabe in pvc conduit with 1.5 sq. Mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire deawn inside he cindulit partlyconcealed in the wall and party laid in slab with, GP Box, piano typeswitch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc complete in all respect as directed including matchin colour wash. |
| 11 | Wiring point for fan /fresh air fan (light duty exhaust fan)With 1.5 sq.mm. FRLSH PVC insulated multistrand single corecopperconductor cable in heavy guage rigid steek conduit partly concealed in wall and party laid in slab alongwith the reinforcenment befor concreting ,completeWith 14 SWG copper earth continuitywire, GP Box, piano type switch & ceiling rose on 3 mm. thick backelite sheetetc, complete in all respect including matching colour wash. |
| 12 | supply andfixing of recessmounting round 15 to 18 wait LRD Down lighterhaving powdercoated die cast aluminium housingwith heat sink, diffuser/reflectorand driver set completein all respect . CAT- AAA |
| 13 | wiring for circuit / sunmain wiring alongwith earth wire with the fllowing sizeFRLS PVC insulatedcopper conductor, single core cable in surface / recessed steel conduit as required. Uctor |
| 14 | Providing and fixing ofWhite glazed earthern ware (Indian type) W.C. pan 510mm diawith all material, labour T&P etc all complete. |
| 15 | providingand laying vitrified tiles in floor in different size (thickness to be specified by the manufacturer) with water ansorption less than 0.8%and conforming to IS :15622, of approved brand & manufacturturer , in allcolours and shade, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)jointingwith grey cement surry @ 3.3 kg/sqm includinggroutingthe joints withwhitecement andmatchingpigments etc. the tiles must be cut whit the zero chippingdiamond cutter only. Laying of tiles will be done with the notch trowel , plier, wedge, clips of requied thickness , leveling system and rubber mallet for placing the tiles gently and easily . size 600x600mm |
| 16 | Desilting of covered nala in liquid or mud in foul position including lift up to 1.5m etc all complete. |
| 17 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. Sheets and galvanized with zinc coating of 120gms/sqm (both side inclusive as per IS ; 277 and consisting of angle of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre-fully perforated Gypsum plaster board of size 1200x2400x12.5mm having approx. 15% perforated area with perforation size and pattern as approved by the engg-in-charge. |
| 18 | student chair Without Armrest Back type Mid Back Dimensions 420mm*420Mm*815mm Load capacity125 Kg Non Foldable Seat Shape Round Without Cushion |
| 19 | Teacher Chair Elegant office chair with high back pneumatic height adjustment of the position of the headrest with3 3D armrests Fabric seat Nylon base withPU swivel wheels Adjustable lumber support Dimensions:68x65x107-117 cm |
| 20 | computertableTeak Wood Shape Rectangular storage withstorage storage Type Darwer And OpenSize/ Dimensions6x2 Feet Suitable folour GreTable Height 2.5 Feet |
| 21 | Teacher table Teak Wood Shape RectangularsroreWith Stoage Storae Type Drawer And openstorage No. Of Drawers 2 Drawers size / Dimensions 4x2 Feet |
| 22 | Visitorchair Height : 975mm,Width- 575mm, Depth -640mm, Seat Height -450mm,Seat Size . Width- 510mmxDepth-500mm, Size. Height- 595mm x Width-490mm. |
| 23 | Add 18 % G.S.T. |
