Tender For Repair And Maintenance Of Periyar Nagar Mcc At Ward No 34 In Tirupathur Municipality
Tender Value
5.50 Lakhs
Estimated cost
Bid Submission
11 Dec 2024
0 days left
EMD
5500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thirupathur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair And Maintenance Of Periyar Nagar Mcc At Ward No 34 In Tirupathur Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 2 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\" X 43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 3 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 4 | Supplying and delivery of following Electrical Materialsand specials including cost and conveyance and stacking at site store for pre measurements etc., completeCeiling Fan 1200mm (48\"\") SD 461 |
| 5 | 18 LED Tube light |
| 6 | 4 Pole MCB |
| 7 | Single Pole MCB |
| 8 | 2 Pole MCB |
| 9 | 6 Amps Plug SD 247 |
| 10 | 20 Amps Plug sd 250 |
| 11 | Repair and servicing of 10HP Motar with necessary specials complete as per standard specification |
| 12 | Supply and delivery of wet type Submergible pumpset 2.00 HP as per IS 8034/1989 without Panel Board 2022-2023 20lpm x 150 mts Head Capacity as per std specification 96(18) |
| 13 | Supply and delivery of 4Sqm cable 3 core including cost and conveyance of materials etc., complete (Page No:114) |
| 14 | Supply and fixing of 63m dia HDPE pipes - PE 100 as per IS 4984/ 1995 for Submersible pump in Bore well class PN 6. The rate shall inclusive of all labour charges and freight charges etc, complete. Nylon Rope |
| 15 | 32mm GI Elbow |
| 16 | 32mm GI Tee |
| 17 | 32mm GI 1/2 feet Nipple |
| 18 | 32mm GI 1 feet Nipple |
| 19 | 32mm GI 2 feet Nipple |
| 20 | 20mm Waste Not Tap |
| 21 | 32mm Clamp Set |
| 22 | 32mm Hose collar with clip |
| 23 | M.S Bore Cover |
| 24 | 25mm GI Coupling |
| 25 | 25mm GI Elbow |
| 26 | 25mm PVC Tap |
| 27 | 40mm PVC Pipe |
| 28 | Supply and delivery of Panel Boardincluding cost and conveyance of materials cost etc., complete 2HP |
| 29 | Labour charges for Errection of submergible Pump set in bore well including fixing and jointing submergible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth values Errection clamps pressure gauges up to the exterior wall of pump room and errction of panel board consisting of TPICN switches starter volmeter ammeter three pilot indicator lamps complete and testing the pump set and trail run for 10 days up to 5 HP. |
| 30 | Supply and delivery of 1000 lit capacity and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,complete as per standard specification. |
| 31 | Painting two coats with ready mixed Plastic emusion of first qulity paint two coat and of approved colour over priming coat including through scrapping clean removal of dirt and , preparing the surface and curing etc., complete and including necessary plaster of paris ,Putty wherever required as per standard specification |
| 32 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
AI Tender Summary
Tender Timeline
Dec 09, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedDec 11, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 11, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender